Relationship of thermal degradation behavior and chemical structure of lignin isolated from palm kernel shell under different process severities
The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Abstract
Abstract Lignin has been considered to be a potential feedstock to produce phenols chemicals by fast pyrolysis technology because of its aromaticity. In this work, four types of lignin were isolated from palm kernel shell with different severities: milled wood lignin (MWL), alkali lignin (AL), Klason lignin (KL), and organosolv ethanol lignin (OEL). A deep investigation of the relevance of the pyrolysis behaviors and chemical structure was carried out by FTIR, GPC, 2D-HSQC-NMR, TGA-FTIR and Py-GC/MS. AL contained highest content of β-O-4 aryl ether bond (53.9/100 Ar) and highest value of S/G ratio (1.68). MWL showed the widest temperature range (126–536 °C) of thermal degradation because of its inhomogeneous distribution of molecular weight. Highest content of oxygen-containing non-condensable gas components (H2O, CO2, CO) was observed in AL. The dominant organic components from lignin pyrolysis were S-type phenols, G-type phenols, P-type phenols, and C-type phenols. G-type (9.74–26.01%) was the dominant phenols products in AL, while P-type (44.23–56.01%) for KL, P-type (29.38–56.07%) for OEL, and G-type (9.08–25.81%) and P-type (22.60–29.04%) in MWL. Higher pyrolysis temperature promoted the formation of aromatics. As the conversion rate increased from 0.1 to 0.8, the activation energy estimated from DAEM model of four types of lignin, all gradually increased.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Catalytic Transformation of Lignin for the Production of Chemicals and Fuels
Li, C., Zhao, X., Wang, A., Huber, G. W., & Zhang, T. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00155 · Cited by 2,951
Mechanism study of wood lignin pyrolysis by using TG–FTIR analysis
Liu, Q., Wang, S., Zheng, Y., Luo, Z., & Cen, K. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.03.007 · Cited by 965
Self-citationKawamoto, H. (2017) · Journal of Wood Science · doi:10.1007/s10086-016-1606-z · Cited by 664
Prospects for pyrolysis technologies in the bioenergy sector: A review
Roy, P., & Dias, G. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.03.136 · Cited by 405
A systematic study of the kinetics of lignin pyrolysis
Jiang, G., Nowakowski, D. J., & Bridgwater, A. V. (2010) · Thermochimica Acta · doi:10.1016/j.tca.2009.10.003 · Cited by 352
Pyrolysis behaviors of four lignin polymers isolated from the same pine wood
Wang, S., Ru, B., Lin, H., Sun, W., & Luo, Z. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.01.127 · Cited by 348
Self-citationEffect of the Temperature on the Composition of Lignin Pyrolysis Products
Jiang, G., Nowakowski, D. J., & Bridgwater, A. V. (2010) · Energy & Fuels · doi:10.1021/ef100363c · Cited by 332
Pyrolysis of Lignins: Experimental and Kinetics Studies
Ferdous, D., Dalai, A. K., Bej, S. K., & Thring, R. W. (2002) · Energy & Fuels · doi:10.1021/ef0200323 · Cited by 310
Liu, C., Hu, J., Zhang, H., & Xiao, R. (2016) · Fuel · doi:10.1016/j.fuel.2016.05.104 · Cited by 269
Bio-oil from fast pyrolysis of lignin: Effects of process and upgrading parameters
Fan, L., Zhang, Y., Liu, S., Zhou, N., Chen, P., Cheng, Y., Addy, M., Lu, Q., Omar, M. M., Liu, Y., et al. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.05.129 · Cited by 265
Self-citationMa, Z., Sun, Q., Ye, J., Yao, Q., & Zhao, C. (2016) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2015.12.007 · Cited by 248
Self-citationZhang, M., Resende, F. L. P., Moutsoglou, A., & Raynie, D. E. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2012.05.009 · Cited by 242
Structural elucidation of whole lignin from Eucalyptus based on preswelling and enzymatic hydrolysis
Wen, J.-L., Sun, S.-L., Yuan, T.-Q., & Sun, R.-C. (2015) · Green Chemistry · doi:10.1039/c4gc01889c · Cited by 207
Thermal reactivities of catechols/pyrogallols and cresols/xylenols as lignin pyrolysis intermediates
Asmadi, M., Kawamoto, H., & Saka, S. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.04.012 · Cited by 136
Cho, J., Chu, S., Dauenhauer, P. J., & Huber, G. W. (2012) · Green Chem. · doi:10.1039/c1gc16222e · Cited by 130
Effect of molecular weight on the pyrolysis characteristics of alkali lignin
Guo, D., Wu, S., Lyu, G., & Guo, H. (2017) · Fuel · doi:10.1016/j.fuel.2016.12.042 · Cited by 85
Cited by
Catalytic oxidation of lignin to valuable biomass-based platform chemicals: A review
Liu, C., Wu, S., Zhang, H., & Xiao, R. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.04.007 · Cited by 310
Comprehensive mechanism of initial stage for lignin pyrolysis
Li, J., Bai, X., Fang, Y., Chen, Y., Wang, X., Chen, H., & Yang, H. (2020) · Combustion and Flame · doi:10.1016/j.combustflame.2020.01.016 · Cited by 127
Huang, M., Xu, J., Ma, Z., Yang, Y., Zhou, B., Wu, C., Ye, J., Zhao, C., Liu, X., Chen, D., et al. (2021) · Fuel Processing Technology · doi:10.1016/j.fuproc.2021.106792 · Cited by 102
Self-citationWang, T.-P., Li, H., Yuan, J.-M., Li, W.-X., Li, K., Huang, Y.-B., Xiao, L.-P., & Lu, Q. (2021) · Industrial Crops and Products · doi:10.1016/j.indcrop.2021.113912 · Cited by 92
Poplar wood torrefaction: Kinetics, thermochemistry and implications
Chai, M., Xie, L., Yu, X., Zhang, X., Yang, Y., Rahman, M. M., Blanco, P. H., Liu, R., Bridgwater, A. V., & Cai, J. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.110962 · Cited by 58
“4 constitute lignin, whose thermal degradation temperature range is wide, because of its inhomogeneous distribution of molecular weight [5].”
BackgroundSelf-citation
Metadata
- Authors
- Ma, Z., Wang, J., Zhou, H., Zhang, Y., Yang, Y., Liu, X., Ye, J., Chen, D., & Wang, S.
- Venue
- Fuel Processing Technology
- Publisher
- Elsevier BV
- Published
- 2018-12
- Volume
- 181
- Pages
- 142-156
- ISSN
- 0378-3820 (ISSN-L)
- OpenAlex
- W2892567099
- Cited by
- 118
- References
- 16
- FWCI
- 5.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.