The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
RETRACTED: Internet of Things (IoT) and its impact on supply chain: A framework for building smart, secure and efficient systems
Abstract
Abstract The traditional supply chains faces several challenges such as uncertainty, cost, complexity and vulnerable problems. To overcome these problems the supply chains must be more smarter. For establishing a large-scale of smart infrastructure to merge data, information, products, physical objects and all processes of supply chain, we applies the internet of things (IOT) in supply chain management (SCM) through building a smart and secure system of SCM. We have prepared a website for suppliers and managers. We tracked the flow of products at each stage in supply chain management through the Radio Frequency Identification (RFID) technology. Each product attached with RFID tag and scanned through RFID reader and ESP8266 at each phase of supply chain management. After scanning the tag we stores tag id in the database. All information about products will be entered by suppliers and then uploaded to managers. In our system the supplier and manager gets perfect information of the entire life cycle of goods, and this will achieve transparency of supply chain management. For assessing security criteria of proposed system of supply chain management, we also proposed a framework which integrates neutrosophic Decision Making Trial and Evaluation Laboratory (N-DEMATEL) technique with analytic hierarchy process (AHP). The neutrosophic Decision Making Trial and Evaluation Laboratory (N-DEMATEL) technique is utilized to infer cause and effect interrelationships among criteria of smart supply chain security requirements. Depending on obtained information from (N-DEMATEL) the neutrosophic AHP is utilized to calculate weight of criteria and sub-criteria. Then the integrated framework will help researchers and practitioners to design secure system of supply chains. We presented DEMATEL and AHP in neutrosophic environment to deal effectively with vague, uncertain and incomplete information. So the proposed system of supply chain management will be able to overcome all challenges of traditional SCM and provide secure environment of SCM processes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Zhu, Q., & Sarkis, J. (2004) · Journal of Operations Management · doi:10.1016/j.jom.2004.01.005 · Cited by 2,761
Towards a theory of supply chain management: the constructs and measurements
Chen, I. J., & Paulraj, A. (2004) · Journal of Operations Management · doi:10.1016/j.jom.2003.12.007 · Cited by 2,419
Opportunities of Sustainable Manufacturing in Industry 4.0
Stock, T., & Seliger, G. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.01.129 · Cited by 1,893
The Internet of Things vision: Key features, applications and open issues
Borgia, E. (2014) · Computer Communications · doi:10.1016/j.comcom.2014.09.008 · Cited by 1,471
TZENG, G., CHIANG, C., & LI, C. (2007) · Expert Systems with Applications · doi:10.1016/j.eswa.2006.02.004 · Cited by 1,266
Developing global managers’ competencies using the fuzzy DEMATEL method
Wu, W.-W., & Lee, Y.-T. (2007) · Expert Systems with Applications · doi:10.1016/j.eswa.2005.12.005 · Cited by 1,245
Büyüközkan, G., & Çifçi, G. (2012) · Expert Systems with Applications · doi:10.1016/j.eswa.2011.08.162 · Cited by 971
Rfid Technologies: Supply-Chain Applications and Implementation Issues
Angeles, R. (2005) · Information Systems Management · doi:10.1201/1078/44912.22.1.20051201/85739.7 · Cited by 818
Using fuzzy DEMATEL to evaluate the green supply chain management practices
Lin, R.-J. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.06.010 · Cited by 735
Weyer, S., Schmitt, M., Ohmer, M., & Gorecky, D. (2015) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2015.06.143 · Cited by 704
A DEMATEL method in identifying key success factors of hospital service quality
Shieh, J.-I., Wu, H.-H., & Huang, K.-K. (2010) · Knowledge-Based Systems · doi:10.1016/j.knosys.2010.01.013 · Cited by 687
Internet of Things for Enterprise Systems of Modern Manufacturing
Bi, Z., Xu, L. D., & Wang, C. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2300338 · Cited by 672
The Internet-of-Things: Review and research directions
Ng, I. C. L., & Wakenshaw, S. Y. L. (2017) · International Journal of Research in Marketing · doi:10.1016/j.ijresmar.2016.11.003 · Cited by 621
Virtualization of food supply chains with the internet of things
Verdouw, C. N., Wolfert, J., Beulens, A. J. M., & Rialland, A. (2016) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2015.11.009 · Cited by 516
Smart supply chain management: a review and implications for future research
Wu, L., Yue, X., Jin, A., & Yen, D. C. (2016) · The International Journal of Logistics Management · doi:10.1108/ijlm-02-2014-0035 · Cited by 437
Neutrosophic set - a generalization of the intuitionistic fuzzy set
Smarandache, F. (2006) · 2006 IEEE International Conference on Granular Computing · doi:10.1109/grc.2006.1635754 · Cited by 435
Airline safety measurement using a hybrid model
Liou, J. J. H., Tzeng, G.-H., & Chang, H.-C. (2007) · Journal of Air Transport Management · doi:10.1016/j.jairtraman.2007.04.008 · Cited by 406
A fuzzy multi-criteria decision making model for supplier selection
Dalalah, D. M., Hayajneh, M. T., & Batieha, F. (2011) · Expert Systems with Applications · doi:10.1016/j.eswa.2011.01.031 · Cited by 353
Zawadzki, P., & Żywicki, K. (2016) · Management and Production Engineering Review · doi:10.1515/mper-2016-0030 · Cited by 351
An integrated MCDM technique combined with DEMATEL for a novel cluster-weighted with ANP method
Yang, J. L., & Tzeng, G. (2010) · Expert Systems with Applications · doi:10.1016/j.eswa.2010.07.048 · Cited by 327
Information architecture for supply chain quality management
Xu, L. D. (2011) · International Journal of Production Research · doi:10.1080/00207543.2010.508944 · Cited by 304
A hybrid approach of neutrosophic sets and DEMATEL method for developing supplier selection criteria
Abdel-Basset, M., Manogaran, G., Gamal, A., & Smarandache, F. (2018) · Design Automation for Embedded Systems · doi:10.1007/s10617-018-9203-6 · Cited by 257
Self-citationWang, Y.-L., & Tzeng, G.-H. (2012) · Expert Systems with Applications · doi:10.1016/j.eswa.2011.11.057 · Cited by 208
YU, J., Subramanian, N., Ning, K., & Edwards, D. (2015) · International Journal of Production Economics · doi:10.1016/j.ijpe.2014.09.031 · Cited by 186
NMCDA: A framework for evaluating cloud computing services
Abdel-Basset, M., Mohamed, M., & Chang, V. (2018) · Future Generation Computer Systems · doi:10.1016/j.future.2018.03.014 · Cited by 186
Self-citationGnimpieba, Z. D. R., Nait-Sidi-Moh, A., Durand, D., & Fortin, J. (2015) · Procedia Computer Science · doi:10.1016/j.procs.2015.07.251 · Cited by 172
Shin, T.-H., Chin, S., Yoon, S.-W., & Kwon, S.-W. (2011) · Automation in Construction · doi:10.1016/j.autcon.2010.12.002 · Cited by 163
Virtualisation of floricultural supply chains: A review from an Internet of Things perspective
Verdouw, C. N., Beulens, A. J. M., & van der Vorst, J. G. A. J. (2013) · Computers and Electronics in Agriculture · doi:10.1016/j.compag.2013.09.006 · Cited by 159
An extensive structural model of supply chain quality management and firm performance
Quang, H. T., Sampaio, P. A. D. C. A., Carvalho, M. S., Fernandes, A. C., Binh, A. D. T., & Vilhena, E. (2016) · International Journal of Quality & Reliability Management · doi:10.1108/ijqrm-11-2014-0188 · Cited by 146
Recent trends in intelligent transportation systems: a review
Singh, B., & Gupta, A. K. (2015) · Journal of Transport Literature · doi:10.1590/2238-1031.jtl.v9n2a6 · Cited by 130
Impact of RFID on manufacturing effectiveness and efficiency
Zelbst, P. J., Green, K. W., Sower, V. E., & Reyes, P. M. (2012) · International Journal of Operations & Production Management · doi:10.1108/01443571211212600 · Cited by 119
Managing Innovative Production Network of Smart Factories
Veža, I., Mladineo, M., & Gjeldum, N. (2015) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2015.06.139 · Cited by 117
Shih, C.-W., & Wang, C.-H. (2015) · Computer Standards & Interfaces · doi:10.1016/j.csi.2015.12.004 · Cited by 117
Supply chain information transmission based on RFID and internet of things
Yan, B., & Huang, G. (2009) · International Colloquium on Computing, Communication, Control, and Management · doi:10.1109/cccm.2009.5267755 · Cited by 114
Fang, C., Liu, X., Pardalos, P. M., & Pei, J. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7593-1 · Cited by 102
Achieving supply chain integration using RFID technology
Wamba, S. F. (2012) · Business Process Management Journal · doi:10.1108/14637151211215019 · Cited by 100
Perspective for smart factory in petrochemical industry
Li, D. (2016) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2016.03.006 · Cited by 100
Intelligent Supply Chain Integration and Management Based on Cloud of Things
Yan, J., Xin, S., Liu, Q., Xu, W., Yang, L., Li, F., Chen, B., & Wang, Q. (2014) · International Journal of Distributed Sensor Networks · doi:10.1155/2014/624839 · Cited by 92
A comparison of the Saaty's AHP and modified AHP for right and left eigenvector inconsistency
Tung, S. L., & Tang, S. (1998) · European Journal of Operational Research · doi:10.1016/s0377-2217(98)00353-1 · Cited by 91
Wu, H., & Tsai, Y.-N. (2011) · International Journal of Systems Science · doi:10.1080/00207721.2011.564674 · Cited by 83
Developing a DEMATEL method to prioritize distribution centers in supply chain
Amiri, M., Sadaghiyani, J. S., Payani, N., & Shafieezadeh, M. (2011) · Management Science Letters · doi:10.5267/j.msl.2010.04.001 · Cited by 78
Liukkonen, M., & Tsai, T. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-8628-y · Cited by 78
Aligning RFID applications with supply chain strategies
Leung, J., Cheung, W., & Chu, S.-C. (2014) · Information & Management · doi:10.1016/j.im.2013.11.010 · Cited by 76
Choi, S., Kim, B. H., & Noh, S. D. (2015) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-015-0143-9 · Cited by 75
Security assessment framework for IoT service
Park, K. C., & Shin, D. (2016) · Telecommunication Systems · doi:10.1007/s11235-016-0168-0 · Cited by 60
Agent-based Gateway Operating System for RFID-enabled ubiquitous manufacturing enterprise
Fang, J., Qu, T., Li, Z., Xu, G., & Huang, G. Q. (2013) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2013.01.001 · Cited by 57
Yuvaraj, S. A., & Sangeetha, M. (2016) · International Conference on Wireless Communications, Signal Processing and Networking (WiSPNET) · doi:10.1109/wispnet.2016.7566196 · Cited by 55
Optimal radio frequency identification deployment in a supply chain network
Chang, S., Klabjan, D., & Vossen, T. W. M. (2010) · International Journal of Production Economics · doi:10.1016/j.ijpe.2010.01.004 · Cited by 38
Using DEMATEL to explore a casual and effect model of sustainable supplier selection
Chiou, C. Y., Hsu, C. W., & Chen, H. C. (2011) · IEEE International Summer Conference of Asia Pacific Business Innovation and Technology Management (APBITM) · doi:10.1109/apbitm.2011.5996331 · Cited by 18
An Experimental Research on Closed Loop Supply Chain Management with Internet of Things
Paksoy, T., Karaoğlan, İ., Gökċen, H., Pardalos, P. M., & Torğul, B. (2016) · Journal of Economics Bibliography · doi:10.1453/jeb.v3i1s.779 · Cited by 18
Real-Time Visibility and Traceability Framework for Discrete Manufacturing Shopfloor
Wang, T., Zhang, Y., & Zang, D. X. (2016) · Atlantis Press eBooks · doi:10.2991/978-94-6239-180-2_72 · Cited by 13
Decision Making Situations Define Data Requirements in Fleet Asset Management
Kinnunen, S.-K., Marttonen-Arola, S., Ylä-Kujala, A., Kärri, T., Ahonen, T., Valkokari, P., & Baglee, D. (2016) · Lecture notes in mechanical engineering · doi:10.1007/978-3-319-27064-7_33 · Cited by 12
Cited by
Núñez-Merino, M., Maqueira-Marín, J. M., Moyano-Fuentes, J., & Martínez-Jurado, P. J. (2020) · International Journal of Production Research · doi:10.1080/00207543.2020.1743896 · Cited by 382
A survey on internet of things security: Requirements, challenges, and solutions
HaddadPajouh, H., Dehghantanha, A., M. Parizi, R., Aledhari, M., & Karimipour, H. (2021) · Internet of Things · doi:10.1016/j.iot.2019.100129 · Cited by 368
Blockchain-Driven IoT for Food Traceability With an Integrated Consensus Mechanism
Tsang, Y. P., Choy, K. L., Wu, C. H., Ho, G. T. S., & Lam, H. Y. (2019) · IEEE Access · doi:10.1109/access.2019.2940227 · Cited by 337
Industry 4.0 in the port and maritime industry: A literature review
de la Peña Zarzuelo, I., Freire Soeane, M. J., & López Bermúdez, B. (2020) · Journal of Industrial Information Integration · doi:10.1016/j.jii.2020.100173 · Cited by 269
Chen, Z., Ming, X., Zhou, T., & Chang, Y. (2020) · Applied Soft Computing · doi:10.1016/j.asoc.2019.106004 · Cited by 262
Metadata
- Authors
- Abdel-Basset, M., Manogaran, G., & Mohamed, M.
- Venue
- Future Generation Computer Systems
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 86
- Pages
- 614-628
- ISSN
- 0167-739X (ISSN-L)
- OpenAlex
- W2802538926
- Cited by
- 427
- References
- 52
- FWCI
- 83.16
- Type
- journal article
- Language
- en
- Status
- Retracted
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.