The DOI matches its Crossref record.
Influence of silica fume on mechanical and physical properties of recycled aggregate concrete
Open accessAbstract
Several studies related to sustainable concrete construction have encouraged development of composite binders, involving Portland cement, industrial by-products, and concrete mixes with partial replacement of natural aggregate with recycled aggregate. In this paper, the effects of incorporating silica fume (SF) in the concrete mix design to improve the quality of recycled aggregates in concrete are presented. Portland cement was replaced with SF at 0%, 5% and 10%. Specimens were manufactured by replacing natural aggregates with recycled aggregates. Two size fractions (4/12 mm and 8/22 mm) as recycled aggregates were used and four series of concrete mixtures were produced. In all concrete mixtures, a constant water/binder ratio at 0.50 was used and concrete mixtures with a target initial slump of S4 class (16–21 cm) were prepared. Concrete properties were evaluated by means of compressive strength, tensile splitting strength, water absorption and ultrasonic pulse velocity and it was found that, using 10% SF as a cement replacement for recycled aggregate concretes enhanced the mechanical and physical properties of concrete. At all the test ages the tensile splitting strength gain of the natural aggregate concrete mixture (NA) with and without SF was higher than that of the recycled concrete mixtures. Continuous and significant improvement in the tensile splitting strength of recycled aggregate concretes incorporating SF was observed. Similar to compressive strength test results, concrete incorporating 10% SF and containing 4/12 mm fraction recycled aggregates showed better performance among recycled aggregate concretes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Akhtar, A., & Sarmah, A. K. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.085 · Cited by 1,250
Properties of recycled concrete aggregate and their influence in new concrete production
Verian, K. P., Ashraf, W., & Cao, Y. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2018.02.005 · Cited by 677
de Brito, J., & Kurda, R. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.123558 · Cited by 436
Green concrete: Prospects and challenges
Liew, K. M., Sojobi, A. O., & Zhang, L. W. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.09.008 · Cited by 384
Behnood, A., & Golafshani, E. M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.065 · Cited by 351
Quan Tran, V., Quoc Dang, V., & Si Ho, L. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.126578 · Cited by 349
Ozbakkaloglu, T., Gholampour, A., & Xie, T. (2018) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0002142 · Cited by 299
Kazmi, S. M. S., Munir, M. J., Wu, Y.-F., Patnaikuni, I., Zhou, Y., & Xing, F. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.103398 · Cited by 253
Metadata
- Authors
- Çakır, Ö., & Sofyanlı, Ö. Ö.
- Venue
- HBRC Journal
- Publisher
- Informa UK Limited
- Published
- 2015-08
- Volume
- 11
- Issue
- 2
- Pages
- 157-166
- ISSN
- 1687-4048 (ISSN-L)
- OpenAlex
- W2032877155
- Cited by
- 173
- References
- 0
- FWCI
- 9.80
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.