Selective adsorption of lithium from high Mg-containing brines using H x TiO 3 ion sieve
Open accessThe DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
The prepared titanium type lithium ion sieve H x TiO 3 are characterized and tested as adsorbents for selective adsorption of lithium from high Mg-containing brine. The maximum adsorption capacities of Li + , Na + , K + , Ca 2 + and Mg 2 + ions onto H x TiO 3 reached 36.34, 1.93, 1.99, 2.58 and 3.53 mg/g, respectively, under the initial pH 8.8 at 25 °C for 24 h. Adsorption isotherms and kinetic analysis indicated that the adsorption of Li + ions and other cations onto H x TiO 3 followed Langmuir isotherm model and pseudo-second order kinetic equation. A diffusion model simulation showed that the Li + ions had the highest external diffusion coefficients (7.7 × 10 − 2 cm s − 1 ) while the other cations had small effect on the adsorption rate of Li + . The Biot number was > 100 signified that these ions adsorption onto H x TiO 3 were controlled by the internal diffusion. The separation factors ( α ) of Li + over other cations were much > 1. In particular, the α value of Li + over Mg 2 + reached 4783, indicating the high selectivity for Li + . In addition, the Li + ion adsorption capacity kept constant during the six adsorption-desorption cycles and molar ratio of Mg to Li of eluents was as low as 0.08, indicating that the H x TiO 3 ion sieve could effectively extract Li + from the enriched brine.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Global lithium resources: relative importance of pegmatite, brine and other deposits
Kesler, S. E., Gruber, P. W., Medina, P. A., Keoleian, G. A., Everson, M. P., & Wallington, T. J. (2012) · Ore Geology Reviews · doi:10.1016/j.oregeorev.2012.05.006 · Cited by 1,140
Recovery of lithium from Uyuni salar brine
An, J. W., Kang, D. J., Tran, K. T., Kim, M. J., Lim, T., & Tran, T. (2012) · Hydrometallurgy · doi:10.1016/j.hydromet.2012.02.008 · Cited by 509
Lithium recovery from salt lake brine by H 2 TiO 3
Chitrakar, R., Makita, Y., Ooi, K., & Sonoda, A. (2014) · Dalton Trans. · doi:10.1039/c4dt00467a · Cited by 345
Chitrakar, R., Kanoh, H., Miyai, Y., & Ooi, K. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie000911h · Cited by 340
Batteries for lithium recovery from brines
Pasta, M., Battistel, A., & La Mantia, F. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22977c · Cited by 278
Selective Recovery Process of Lithium from Seawater Using Integrated Ion Exchange Methods
Nishihama, S., Onishi, K., & Yoshizuka, K. (2011) · Solvent Extraction and Ion Exchange · doi:10.1080/07366299.2011.573435 · Cited by 164
Study on Li+ uptake by lithium ion-sieve via the pH technique
Wang, L., Meng, C. G., & Ma, W. (2009) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2008.09.050 · Cited by 121
Recovery of lithium from Urmia Lake by a nanostructure MnO 2 ion sieve
Zandevakili, S., Ranjbar, M., & Ehteshamzadeh, M. (2014) · Hydrometallurgy · doi:10.1016/j.hydromet.2014.08.004 · Cited by 109
Cited by
Sun, Y., Wang, Q., Wang, Y., Yun, R., & Xiang, X. (2021) · Separation and Purification Technology · doi:10.1016/j.seppur.2020.117807 · Cited by 685
Novel approaches for lithium extraction from salt-lake brines: A review
Liu, G., Zhao, Z., & Ghahreman, A. (2019) · Hydrometallurgy · doi:10.1016/j.hydromet.2019.05.005 · Cited by 465
Lithium recovery from brine: Recent developments and challenges
Khalil, A., Mohammed, S., Hashaikeh, R., & Hilal, N. (2022) · Desalination · doi:10.1016/j.desal.2022.115611 · Cited by 396
Peng, H., & Zhao, Q. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009430 · Cited by 389
Technology for the Recovery of Lithium from Geothermal Brines
Stringfellow, W. T., & Dobson, P. F. (2021) · Energies · doi:10.3390/en14206805 · Cited by 293
“TiOx is still being investigated at a fundamental level in the laboratory [80,100,101] and few published studies have examined the efficacy of TiOx in complex brines [80,94].”
BackgroundInfluential
Metadata
- Authors
- Wang, S., Li, P., Zhang, X., Zheng, S., & Zhang, Y.
- Venue
- Hydrometallurgy
- Publisher
- Elsevier BV
- Published
- 2017-12
- Volume
- 174
- Pages
- 21-28
- ISSN
- 0304-386X (ISSN-L)
- OpenAlex
- W2754480498
- Cited by
- 146
- References
- 8
- FWCI
- 6.33
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Selective adsorption of lithium from high Mg-containing brines using H x TiO 3 ion sieve. https://app.cochat.ai/papers/10.1016/j.hydromet.2017.09.009
- The paper
- Wang, S., Li, P., Zhang, X., Zheng, S., & Zhang, Y. (2017). Selective adsorption of lithium from high Mg-containing brines using H x TiO 3 ion sieve. Hydrometallurgy. https://doi.org/10.1016/j.hydromet.2017.09.009
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.