Intensification of protein extraction from soybean processing materials using hydrodynamic cavitation
Open accessThe DOI matches its Crossref record.
Abstract
High pressure homogenisation (HPH) has been investigated for its potential to aid the aqueous extraction of protein and other components from soybeans. HPH treatments (50–125 MPa) were applied to soy slurry and okara , the diluted waste stream from soybase production. Extraction yields of oil, protein and solids were calculated, and the feasibility of the technology was assessed. The most productive HPH treatment investigated improved extraction yields of protein up to 82% with a single pass of soy slurry at 100 MPa. In comparison, a maximal protein extraction yield of 70% has been achieved previously using ultrasound at lab-scale for 15 min (20 kHz, 65 W according to manual, 13 mm probe tip) (Preece et al., in press). Results showed a particle size reduction upon HPH and disruption of intact cells, confirmed via confocal laser scanning microscopy . Multiple HPH passes of soy slurry caused an increase in dynamic viscosity and a small increase in particle size probably due to cell wall swelling, resulting in decreased separation efficiency and consequently a reduced extraction yield. HPH offers extraction assistance, with more promising results reported in comparison to ultrasound-assisted extraction of soybean processing materials. Industrial relevance Improvement of current soybean processing is desirable on an industrial level to better use available raw materials and reduce waste production. This study shows the effects of a technology already widely employed in industry for other benefits, such as fine emulsion production and microbial cell disruption . High pressure homogenisation was carried out on a lab-scale on soybean processing materials which were prepared in a pilot plant, with similar feed compositions to those produced at an industrial scale.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Pojić, M., Mišan, A., & Tiwari, B. (2018) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2018.03.010 · Cited by 474
Panda, D., & Manickam, S. (2019) · Applied Sciences · doi:10.3390/app9040766 · Cited by 239
“Protein Soybean Inlet pressure (MPa): 100 82% [48]”
BackgroundExtraction of protein from food waste: An overview of current status and opportunities
Kamal, H., Le, C. F., Salter, A. M., & Ali, A. (2021) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/1541-4337.12739 · Cited by 170
“Albeit, bath-type is more commonly used due to application ease, but on an overall evaluation the protein extraction competence via probe-type was higher in comparison (Ly et al., 2018; Preece, Hooshyar, Krijgsman, et al., 2017).”
InfluentialCabral, E. M., Zhu, X., Garcia-Vaquero, M., Pérez-Vila, S., Tang, J., Gómez-Mascaraque, L. G., Poojary, M. M., Curtin, J., & Tiwari, B. K. (2023) · Foods · doi:10.3390/foods12152883 · Cited by 28
Metadata
- Authors
- Preece, K. E., Hooshyar, N., Krijgsman, A. J., Fryer, P. J., & Zuidam, N. J.
- Venue
- Innovative Food Science & Emerging Technologies
- Publisher
- Elsevier BV
- Published
- 2017-06
- Volume
- 41
- Pages
- 47-55
- ISSN
- 1466-8564 (ISSN-L)
- OpenAlex
- W2569437451
- Cited by
- 126
- References
- 0
- FWCI
- 7.55
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.