The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Strong and thermal-resistance glass fiber-reinforced polylactic acid (PLA) composites enabled by heat treatment
Abstract
Polylactic acid (PLA) is a biodegradable polymer derived from renewable resources, showing potentials in replacing traditional petroleum-based polymers, yet its brittleness and low thermal-resistance limits its applications. Thus, glass fibers (GF) combined with heat treatment were used to prepare high-performance PLA. Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) were employed to analyze crystallization behavior of PLA/GF composite. Tensile, flexural and impact tests were conducted to investigate mechanical properties, and heat deflection temperature was measured to evaluate thermal resistance. GF can coincidently enhance strength, rigidity, and toughness of PLA. Isothermal heat treatment can further improve the mechanical properties regardless of GF content. Compared with neat PLA, the tensile strength, flexural modulus, and impact strength can be increased by 162.5%, 266.4%, 232.5%, respectively, in the presence of 20 wt% GF after isothermal heat treatment, and meanwhile heat deflection temperature can be increased from 50.6 °C to 148.8 °C. Both DSC and XRD analysis results indicated that GF can significantly enhance crystallization of PLA. Thus, not only GF but also enhanced crystallization led to the outstanding mechanical performance of PLA/GF composites. While GF shows little effect on thermal resistance, heat treatment can remarkably improve thermal stability, in particular for PLA/GF composites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
River plastic emissions to the world’s oceans
Lebreton, L. C. M., van der Zwet, J., Damsteeg, J.-W., Slat, B., Andrady, A., & Reisser, J. (2017) · Nature Communications · doi:10.1038/ncomms15611 · Cited by 4,011
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Sustainable polymers from renewable resources
Zhu, Y., Romain, C., & Williams, C. K. (2016) · Nature · doi:10.1038/nature21001 · Cited by 2,762
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Poly‐Lactic Acid: Production, Applications, Nanocomposites, and Release Studies
Jamshidian, M., Tehrany, E. A., Imran, M., Jacquot, M., & Desobry, S. (2010) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/j.1541-4337.2010.00126.x · Cited by 1,557
Zhang, J., Tashiro, K., Tsuji, H., & Domb, A. J. (2008) · Macromolecules · doi:10.1021/ma0706071 · Cited by 913
Polylactic acid blends: The future of green, light and tough
Hamad, K., Kaseem, M., Ayyoob, M., Joo, J., & Deri, F. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.001 · Cited by 640
Narancic, T., Verstichel, S., Reddy Chaganti, S., Morales-Gamez, L., Kenny, S. T., De Wilde, B., Babu Padamati, R., & O’Connor, K. E. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.8b02963 · Cited by 632
Crystallization and Melting Behavior of Polylactides
Sarasua, J.-R., Prud'homme, R. E., Wisniewski, M., Le Borgne, A., & Spassky, N. (1998) · Macromolecules · doi:10.1021/ma971545p · Cited by 525
Cited by
Zaaba, N. F., & Jaafar, M. (2020) · Polymer Engineering & Science · doi:10.1002/pen.25511 · Cited by 683
Zhao, X., Liu, J., Li, J., Liang, X., Zhou, W., & Peng, S. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.091 · Cited by 249
Nam, B., & Son, Y. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49011 · Cited by 24
Metadata
- Authors
- Wang, G., Zhang, D., Li, B., Wan, G., Zhao, G., & Zhang, A.
- Venue
- International Journal of Biological Macromolecules
- Publisher
- Elsevier BV
- Published
- 2019-05
- Volume
- 129
- Pages
- 448-459
- ISSN
- 0141-8130 (ISSN-L)
- OpenAlex
- W2913181335
- Cited by
- 177
- References
- 11
- FWCI
- 4.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Strong and thermal-resistance glass fiber-reinforced polylactic acid (PLA) composites enabled by heat treatment. https://app.cochat.ai/papers/10.1016/j.ijbiomac.2019.02.020
- The paper
- Wang, G., Zhang, D., Li, B., Wan, G., Zhao, G., & Zhang, A. (2019). Strong and thermal-resistance glass fiber-reinforced polylactic acid (PLA) composites enabled by heat treatment. International Journal of Biological Macromolecules. https://doi.org/10.1016/j.ijbiomac.2019.02.020
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.