The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Failure Modes and Effects Analysis (FMEA) for wind turbines
Open accessAbstract
The Failure Modes and Effects Analysis (FMEA) method has been used to study the reliability of many different power generation systems. This paper now applies that method to a wind turbine (WT) system using a proprietary software reliability analysis tool. Comparison is made between the quantitative results of an FMEA and reliability field data from real wind turbine systems and their assemblies. These results are discussed to establish relationships which are useful for future wind turbine designs. The main system studied is an existing design 2 MW wind turbine with a Doubly Fed Induction Generator (DFIG), which is then compared with a hypothetical wind turbine system using the Brushless Doubly Fed Generator (BDFG) of the same rating. The software reliability analysis tool used for these studies was Relex Reliability Studio 2007 Version 2.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Comparison of Direct-Drive and Geared Generator Concepts for Wind Turbines
Polinder, H., Van Der Pijl, F. F. A., De Vilder, G.-J., & Tavner, P. J. (2006) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2006.875476 · Cited by 1,128
Self-citationReliability of wind turbine subassemblies
Spinato, F., Tavner, P. J., van Bussel, G. J. W., & Koutoulakos, E. (2009) · IET Renewable Power Generation · doi:10.1049/iet-rpg.2008.0060 · Cited by 646
Self-citationReliability analysis for wind turbines
Tavner, P. J., Xiang, J., & Spinato, F. (2007) · Wind Energy · doi:10.1002/we.204 · Cited by 494
Self-citationWind turbine concept market penetration over 10 years (1995–2004)
Hansen, A. D., & Hansen, L. H. (2007) · Wind Energy · doi:10.1002/we.210 · Cited by 236
Cost-Effective Wind Energy Utilization for Reliable Power Supply
Karki, R., & Billinton, R. (2004) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2003.822293 · Cited by 219
Cited by
From Corrective to Predictive Maintenance—A Review of Maintenance Approaches for the Power Industry
Molęda, M., Małysiak-Mrozek, B., Ding, W., Sunderam, V., & Mrozek, D. (2023) · Sensors · doi:10.3390/s23135970 · Cited by 288
Rangel-Martinez, D., Nigam, K. D. P., & Ricardez-Sandoval, L. A. (2021) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2021.08.013 · Cited by 260
Mapping wastes in complex projects for Lean Product Development
Belvedere, V., Cuttaia, F., Rossi, M., & Stringhetti, L. (2019) · International Journal of Project Management · doi:10.1016/j.ijproman.2019.01.008 · Cited by 32
Status of FMECA research and engineering application
Chen, Y., Ye, C., Liu, B., & Kang, R. (2012) · Proceedings of the IEEE 2012 Prognostics and System Health Management Conference (PHM-2012 Beijing) · doi:10.1109/phm.2012.6228914 · Cited by 24
Metadata
- Authors
- Arabian-Hoseynabadi, H., Oraee, H., & Tavner, P. J.
- Venue
- International Journal of Electrical Power & Energy Systems
- Publisher
- Elsevier BV
- Published
- 2010-09
- Volume
- 32
- Issue
- 7
- Pages
- 817-824
- ISSN
- 0142-0615 (ISSN-L)
- OpenAlex
- W2025343356
- Cited by
- 426
- References
- 5
- FWCI
- 65.14
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.