The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
The range and level of impurities in CO2 streams from different carbon capture sources
Abstract
For CO2 capture and storage deployment, the impact of impurities in the gas or dense phase CO2 stream arising from fossil fuel power plants, or large scale industrial emitters, is of fundamental importance to the safe and economic transportation and storage of the captured CO2. This paper reviews the range and level of impurities expected from the main capture technologies used with fossil-fuelled power plants in addition to other CO2 emission-intensive industries. Analysis is presented with respect to the range of impurities present in CO2 streams captured using pre-combustion, post-combustion and oxy-fuel technologies, in addition to an assessment of the different parameters affecting the CO2 mixture composition. This includes modes of operation of the power plant, and different technologies for the reduction and removal of problematic components such as water and acid gases (SOx/NOx). A literature review of data demonstrates that the purity of CO2 product gases from carbon capture sources is highly dependent upon the type of technology used. This paper also addresses the CO2 purification technologies available for the removal of CO2 impurities from raw oxy-fuel flue gas, such as Hg and non-condensable compounds. CO2 purities of over 99% are achievable using post-combustion capture technologies with low levels of the main impurities of N2, Ar and O2. However, CO2 capture from oxy-fuel combustion and integrated gasification combined cycle power plants will need to take into consideration the removal of non-condensables, acid gas species, and other contaminants. The actual level of CO2 purity required will be dictated by a combination of transport and storage requirements, and process economics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Inventory of U.S. Greenhouse Gas Emissions and Sinks
Hockstad, L., & Hanel, L. (2018) · University of North Texas Digital Library (University of North Texas) · doi:10.15485/1464240 · Cited by 2,821
Oxy-fuel combustion of solid fuels
Toftegaard, M. B., Brix, J., Jensen, P. A., Glarborg, P., & Jensen, A. D. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2010.02.001 · Cited by 1,146
Pollutants from the combustion of solid biomass fuels
Williams, A., Jones, J. M., Ma, L., & Pourkashanian, M. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2011.10.001 · Cited by 635
Self-citationDynamis CO2 quality recommendations
de Visser, E., Hendriks, C., Barrio, M., Mølnvik, M. J., de Koeijer, G., Liljemark, S., & Le Gallo, Y. (2008) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2008.04.006 · Cited by 530
Atmospheric tar balls: Particles from biomass and biofuel burning
Pósfai, M., Gelencsér, A., Simonics, R., Arató, K., Li, J., Hobbs, P. V., & Buseck, P. R. (2004) · Journal of Geophysical Research: Atmospheres · doi:10.1029/2003jd004169 · Cited by 370
Proceedings of 11th International Conference on Greenhouse Gas Control Technologies
Gibbins, J., Chalmers, H., Lucquiaud, M., Davison, J., Li, J., Liang, X., & McGlashan, N. R. (2012) · Cited by 323
Chemical forms of ash-forming elements in woody biomass fuels
Werkelin, J., Skrifvars, B.-J., Zevenhoven, M., Holmbom, B., & Hupa, M. (2010) · Fuel · doi:10.1016/j.fuel.2009.09.005 · Cited by 267
Jappe Frandsen, F. (2005) · Fuel · doi:10.1016/j.fuel.2004.08.026 · Cited by 232
Corrosion of pipelines used for CO2 transport in CCS: Is it a real problem?
Cole, I. S., Corrigan, P., Sim, S., & Birbilis, N. (2011) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2011.05.010 · Cited by 214
Power generation with CO2 capture: Technology for CO2 purification
Pipitone, G., & Bolland, O. (2009) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2009.03.001 · Cited by 198
Cited by
Carbon capture and storage (CCS): the way forward
Bui, M., Adjiman, C. S., Bardow, A., Anthony, E. J., Boston, A., Brown, S., Fennell, P. S., Fuss, S., Galindo, A., Hackett, L. A., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02342a · Cited by 4,374
A review of developments in carbon dioxide storage
Aminu, M. D., Nabavi, S. A., Rochelle, C. A., & Manovic, V. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.09.015 · Cited by 1,011
Gas hydrates in sustainable chemistry
Hassanpouryouzband, A., Joonaki, E., Vasheghani Farahani, M., Takeya, S., Ruppel, C., Yang, J., English, N. J., Schicks, J. M., Edlmann, K., Mehrabian, H., et al. (2020) · Chemical Society Reviews · doi:10.1039/c8cs00989a · Cited by 809
Cryogenic-based CO2 capture technologies: State-of-the-art developments and current challenges
Song, C., Liu, Q., Deng, S., Li, H., & Kitamura, Y. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.11.018 · Cited by 652
Dunstan, M. T., Donat, F., Bork, A. H., Grey, C. P., & Müller, C. R. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00100 · Cited by 481
Metadata
- Authors
- Porter, R. T. J., Fairweather, M., Pourkashanian, M., & Woolley, R. M.
- Venue
- International Journal of Greenhouse Gas Control
- Publisher
- Elsevier BV
- Published
- 2015-05
- Volume
- 36
- Pages
- 161-174
- ISSN
- 1750-5836 (ISSN-L)
- OpenAlex
- W1998730244
- Cited by
- 323
- References
- 27
- FWCI
- 20.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The range and level of impurities in CO2 streams from different carbon capture sources. https://app.cochat.ai/papers/10.1016/j.ijggc.2015.02.016
- The paper
- Porter, R. T. J., Fairweather, M., Pourkashanian, M., & Woolley, R. M. (2015). The range and level of impurities in CO2 streams from different carbon capture sources. International Journal of Greenhouse Gas Control. https://doi.org/10.1016/j.ijggc.2015.02.016
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.