The DOI matches its Crossref record; 60 of the 60 references it cites were found in a registry or an index.
Review: Role of chemistry, mechanics, and transport on well integrity in CO2 storage environments
Open accessAbstract
Among the various risks associated with CO 2 storage in deep geologic formations, wells are important potential pathways for fluid leaks and groundwater contamination. Injection of CO 2 will perturb the storage reservoir and any wells that penetrate the CO 2 or pressure footprints are potential pathways for leakage of CO 2 and/or reservoir brine. Well leakage is of particular concern for regions with a long history of oil and gas exploration because they are top candidates for geologic CO 2 storage sites. This review explores in detail the ability of wells to retain their integrity against leakage with careful examination of the coupled physical and chemical processes involved. Understanding time-dependent leakage is complicated by the changes in fluid flow, solute transport, chemical reactions, and mechanical stresses over decade or longer time frames for site operations and monitoring. Almost all studies of the potential for well leakage have been laboratory based, as there are limited data on field-scale leakage. Laboratory experiments show that CO 2 and CO 2 -saturated brine still react with cement and casing when leakage occurs by diffusion only. The rate of degradation, however, is transport-limited and alteration of cement and casing properties is low. When a leakage path is already present due to cement shrinkage or fracturing, gaps along interfaces (e.g. casing/cement or cement/rock), or casing failures, chemical and mechanical alteration have the potential to decrease or increase leakage risks. Laboratory experiments and numerical simulations have shown that mineral precipitation or closure of strain-induced fractures can seal a leak pathway over time or conversely open pathways depending on flow-rate, chemistry, and the stress state. Experiments with steel/cement and cement/rock interfaces have indicated that protective mechanisms such as metal passivation, chemical alteration, mechanical deformation, and pore clogging can also help mitigate leakage. The specific rate and nature of alteration depend on the cement, brine, and injected fluid compositions. For example, the presence of co-injected gases (e.g. O 2 , H 2 S, and SO 2 ) and pozzolan amendments (fly ash) to cement influences the rate and the nature of cement reactions. A more complete understanding of the coupled physical–chemical mechanisms involved with sealing and opening of leakage pathways is needed. An important challenge is to take empirically based chemical, mechanical, and transport models reviewed here and assess leakage risk for carbon storage at the field scale. Field observations that accompany laboratory and modeling studies are critical to validating understanding of leakage risk. Long-term risk at the field scale is an area of active research made difficult by the large variability of material types (cement, geologic material, casing), field conditions (pressure, temperature, gradient in potential, residence time), and leaking fluid composition (CO 2 , co-injected gases, brine). Of particular interest are the circumstances when sealing and other protective mechanisms are likely to be effective, when they are likely to fail, and the zone of uncertainty between these two extremes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Neville, A. M. (1968) · Virtual Defense Library (Ministerio de Defensa) · Cited by 5,444
Strength, deformation and conductivity coupling of rock joints
Barton, N. R., Bandis, S., & Bakhtar, K. (1985) · International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts · doi:10.1016/0148-9062(85)93227-9 · Cited by 1,593
Key issues related to modelling of internal corrosion of oil and gas pipelines – A review
Nešić, S. (2007) · Corrosion Science · doi:10.1016/j.corsci.2007.06.006 · Cited by 1,241
Constantinides, G., & Ulm, F.-J. (2004) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00230-8 · Cited by 1,226
Carbon Dioxide Corrosion in Oil and Gas Production—A Compendium
Kermani, M., & Morshed, A. R. K. A. R. (2003) · CORROSION · doi:10.5006/1.3277596 · Cited by 894
Degradation of Well Cement by CO 2 under Geologic Sequestration Conditions
Kutchko, B. G., Strazisar, B. R., Dzombak, D. A., Lowry, G. V., & Thaulow, N. (2007) · Environmental Science & Technology · doi:10.1021/es062828c · Cited by 604
Self-citationCarey, J. W., Wigand, M., Chipera, S. J., WoldeGabriel, G., Pawar, R., Lichtner, P. C., Wehner, S. C., Raines, M. A., & Guthrie, G. D. (2007) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(06)00004-1 · Cited by 503
Self-citationEffect of fly ash on Portland cement systems
Papadakis, V. G. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00153-2 · Cited by 465
Gasda, S. E., Bachu, S., & Celia, M. A. (2004) · Environmental Geology · doi:10.1007/s00254-004-1073-5 · Cited by 442
Review of integrity of existing wells in relation to CO2 geological storage: What do we know?
Zhang, M., & Bachu, S. (2011) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2010.11.006 · Cited by 344
Cited by
Subsurface carbon dioxide and hydrogen storage for a sustainable energy future
Krevor, S., de Coninck, H., Gasda, S. E., Ghaleigh, N. S., de Gooyert, V., Hajibeygi, H., Juanes, R., Neufeld, J., Roberts, J. J., & Swennenhuis, F. (2023) · Nature Reviews Earth & Environment · doi:10.1038/s43017-022-00376-8 · Cited by 481
Estimating geological CO2 storage security to deliver on climate mitigation
Alcalde, J., Flude, S., Wilkinson, M., Johnson, G., Edlmann, K., Bond, C. E., Scott, V., Gilfillan, S. M. V., Ogaya, X., & Haszeldine, R. S. (2018) · Nature Communications · doi:10.1038/s41467-018-04423-1 · Cited by 442
Leakage risk assessment of a CO2 storage site: A review
Gholami, R., Raza, A., & Iglauer, S. (2021) · Earth-Science Reviews · doi:10.1016/j.earscirev.2021.103849 · Cited by 364
Carbon Capture and Storage: History and the Road Ahead
Ma, J., Li, L., Wang, H., Du, Y., Ma, J., Zhang, X., & Wang, Z. (2022) · Engineering · doi:10.1016/j.eng.2021.11.024 · Cited by 301
Self-citationExpanding the role of reactive transport models in critical zone processes
Li, L., Maher, K., Navarre-Sitchler, A., Druhan, J., Meile, C., Lawrence, C., Moore, J., Perdrial, J., Sullivan, P., Thompson, A., et al. (2017) · Earth-Science Reviews · doi:10.1016/j.earscirev.2016.09.001 · Cited by 300
Self-citationPlug & abandonment of offshore wells: Ensuring long-term well integrity and cost-efficiency
Vrålstad, T., Saasen, A., Fjær, E., Øia, T., Ytrehus, J. D., & Khalifeh, M. (2019) · Journal of Petroleum Science and Engineering · doi:10.1016/j.petrol.2018.10.049 · Cited by 300
Metadata
- Authors
- Carroll, S., Carey, J. W., Dzombak, D., Huerta, N. J., Li, L., Richard, T., Um, W., Walsh, S. D. C., & Zhang, L.
- Venue
- International Journal of Greenhouse Gas Control
- Publisher
- Elsevier BV
- Published
- 2016-06
- Volume
- 49
- Pages
- 149-160
- ISSN
- 1750-5836 (ISSN-L)
- OpenAlex
- W2303715525
- Cited by
- 255
- References
- 60
- FWCI
- 12.27
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.