Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index.

Estimating geological CO2 storage security to deliver on climate mitigation

Open access

Published version of a preprint

Abstract

Carbon capture and storage (CCS) can help nations meet their Paris CO 2 reduction commitments cost-effectively. However, lack of confidence in geologic CO 2 storage security remains a barrier to CCS implementation. Here we present a numerical program that calculates CO 2 storage security and leakage to the atmosphere over 10,000 years. This combines quantitative estimates of geological subsurface CO 2 retention, and of surface CO 2 leakage. We calculate that realistically well-regulated storage in regions with moderate well densities has a 50% probability that leakage remains below 0.0008% per year, with over 98% of the injected CO 2 retained in the subsurface over 10,000 years. An unrealistic scenario, where CO 2 storage is inadequately regulated, estimates that more than 78% will be retained over 10,000 years. Our modelling results suggest that geological storage of CO 2 can be a secure climate change mitigation option, but we note that long-term behaviour of CO 2 in the subsurface remains a key uncertainty.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s41467-018-04423-1

Cites

53 of 53 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 The Storage Security Calculator concept. The CO2 immobilisation model [1] combines two sub-models: [1a] residual trapping, and [1b] chemical trapping (defined as a combination of solubility and mineral trapping). The CO2 leakage model [2] combines three sub-models: [2a] leakage through active (injection) wells, [2b] abandoned wells, and [2c] leakage via natural pathways. The key input parameters for each sub-model are shown
Fig. 1 The Storage Security Calculator concept. The CO2 immobilisation model [1] combines two sub-models: [1a] residual trapping, and [1b] chemical trapping (defined as a combination of solubility and mineral trapping). The CO2 leakage model [2] combines three sub-models: [2a] leakage through active (injection) wells, [2b] abandoned wells, and [2c] leakage via natural pathways. The key input parameters for each sub-model are shownCC BY · PubMed Central
Fig. 2 Modelling stages computed by the Storage Security Calculator. The immobilisation and leakage models described in Fig. 1 are integrated in the Storage Security Calculator to compute the proportion of remaining mobile CO2 in the subsurface in four stages. I) The total amount of CO2 injected into reservoir is computed (based on the storage target). II) The amount of CO2 immobilised by residual trapping is calculated (residual trapping immobilisation model – [1a]). III). The amount of CO2 leaked from the reservoir (and, for simplicity, assumed to reach the atmosphere) is calculated via the leakage model. IV) The amount of CO2 immobilised by chemical trapping (chemical trapping immobilisation model) is calculated as a function of free-phase (i.e., both residual and mobile) CO2 remaining in the reservoir. The calculations are carried out annually for each time-step of the model until there is no mobile CO2 remaining, or until 10,000 years, whichever happens first
Fig. 2 Modelling stages computed by the Storage Security Calculator. The immobilisation and leakage models described in Fig. 1 are integrated in the Storage Security Calculator to compute the proportion of remaining mobile CO2 in the subsurface in four stages. I) The total amount of CO2 injected into reservoir is computed (based on the storage target). II) The amount of CO2 immobilised by residual trapping is calculated (residual trapping immobilisation model – [1a]). III). The amount of CO2 leaked from the reservoir (and, for simplicity, assumed to reach the atmosphere) is calculated via the leakage model. IV) The amount of CO2 immobilised by chemical trapping (chemical trapping immobilisation model) is calculated as a function of free-phase (i.e., both residual and mobile) CO2 remaining in the reservoir. The calculations are carried out annually for each time-step of the model until there is no mobile CO2 remaining, or until 10,000 years, whichever happens firstCC BY · PubMed Central
Fig. 3 CO2 storage modelling results for the three target scenarios. a Evolution of CO2 immobilisation and leakage over time, for the three base case scenarios. The black line shows the total CO2 injected, between 2020 and 2050. The grey line shows when injection ceases. The blue line shows CO2 retained by immobilisation due to rapid residual trapping and due to longer-timescale solubility and mineralisation trapping. The green dashed line is the cumulative limit of CO2 retention due to leakage of CO2 out of the subsurface, for example through faults or leaking wells, and is the inverse of leakage (red line). Between the blue and green lines is CO2 retained in the reservoir by structural/stratigraphic trapping. Most CO2 loss occurs through leaking wells. Red line at base of graph shows the base case result of cumulative leakage through time, with shaded P5 to P95 distribution envelopes above and below as derived from Monte Carlo analysis. The red number is the base case percentage cumulative leakage at 10,000 years, cf Table 1. b Histograms showing the distribution of results from Monte Carlo analysis (10,000 realisations) for each scenario; results are cumulative leakage as a percentage of the total CO2 injected at model year 10,000 (x-axis). Red vertical lines show the base case scenario cumulative leakage result at 10,000 years (red numbers in graphs above, and Table 1)
Fig. 3 CO2 storage modelling results for the three target scenarios. a Evolution of CO2 immobilisation and leakage over time, for the three base case scenarios. The black line shows the total CO2 injected, between 2020 and 2050. The grey line shows when injection ceases. The blue line shows CO2 retained by immobilisation due to rapid residual trapping and due to longer-timescale solubility and mineralisation trapping. The green dashed line is the cumulative limit of CO2 retention due to leakage of CO2 out of the subsurface, for example through faults or leaking wells, and is the inverse of leakage (red line). Between the blue and green lines is CO2 retained in the reservoir by structural/stratigraphic trapping. Most CO2 loss occurs through leaking wells. Red line at base of graph shows the base case result of cumulative leakage through time, with shaded P5 to P95 distribution envelopes above and below as derived from Monte Carlo analysis. The red number is the base case percentage cumulative leakage at 10,000 years, cf Table 1. b Histograms showing the distribution of results from Monte Carlo analysis (10,000 realisations) for each scenario; results are cumulative leakage as a percentage of the total CO2 injected at model year 10,000 (x-axis). Red vertical lines show the base case scenario cumulative leakage result at 10,000 years (red numbers in graphs above, and Table 1)CC BY · PubMed Central
Fig. 4 Monte Carlo runs of the three scenarios. The graphs show cumulative leakage of CO2 as a percentage of the total injected. Each scenario shows the P50 output as a blue, green, or magenta line, with shading above showing the P05 limit, and below for the P95 limit, defining occurrence envelopes for the three scenarios. These are calculated on 12 Gt CO2 injected between 2020–2050, with subsequent storage and leakage over 10,000 years. Black dotted lines show comparisons based on time averaged yearly constant leak rates for 0.1, 0.01, 0.001 and 0.0001% per year (the latter represented by the unlabelled dotted line at the base of the diagram). Offshore Well-Regulated storage (blue) is found to be the most reliable Scenario. Onshore Well-Regulated storage (green) exhibits higher leakage due to a higher density of abandoned wells acting as potential leakage pathways. Poorly-Regulated Onshore storage (magenta) exhibits the highest leakage rates in the short term due to the prevalence of unidentified abandoned wells that are unplugged or degraded
Fig. 4 Monte Carlo runs of the three scenarios. The graphs show cumulative leakage of CO2 as a percentage of the total injected. Each scenario shows the P50 output as a blue, green, or magenta line, with shading above showing the P05 limit, and below for the P95 limit, defining occurrence envelopes for the three scenarios. These are calculated on 12 Gt CO2 injected between 2020–2050, with subsequent storage and leakage over 10,000 years. Black dotted lines show comparisons based on time averaged yearly constant leak rates for 0.1, 0.01, 0.001 and 0.0001% per year (the latter represented by the unlabelled dotted line at the base of the diagram). Offshore Well-Regulated storage (blue) is found to be the most reliable Scenario. Onshore Well-Regulated storage (green) exhibits higher leakage due to a higher density of abandoned wells acting as potential leakage pathways. Poorly-Regulated Onshore storage (magenta) exhibits the highest leakage rates in the short term due to the prevalence of unidentified abandoned wells that are unplugged or degradedCC BY · PubMed Central
Fig. 5 Sensitivity tests of the input parameters. The tornado diagrams for the three Scenarios show the impact on leakage of changing the parameters listed. The graphs show cumulative leakage of CO2 as a percentage of the total injected. Each parameter was assessed in turn by varying it between its maximum and minimum values, with all the other parameters held at their base case values. The parameters shown are those that have a significant impact on the computed results (a relative difference of at least 5% between the base case and sensitivity test results). Values listed are % leakage results at 10,000 years. Maximum and minimum values were defined as either two standard deviations from the mean, or: *used minimum and maximum values varying between 0 and 5 wells km−2; **minimum and maximum values as defined in the Methods Section ***Varied between 1 and 1.1 for the well-regulated scenarios and from 1.1 to 2.0 for the Poorly-Regulated Scenario
Fig. 5 Sensitivity tests of the input parameters. The tornado diagrams for the three Scenarios show the impact on leakage of changing the parameters listed. The graphs show cumulative leakage of CO2 as a percentage of the total injected. Each parameter was assessed in turn by varying it between its maximum and minimum values, with all the other parameters held at their base case values. The parameters shown are those that have a significant impact on the computed results (a relative difference of at least 5% between the base case and sensitivity test results). Values listed are % leakage results at 10,000 years. Maximum and minimum values were defined as either two standard deviations from the mean, or: *used minimum and maximum values varying between 0 and 5 wells km−2; **minimum and maximum values as defined in the Methods Section ***Varied between 1 and 1.1 for the well-regulated scenarios and from 1.1 to 2.0 for the Poorly-Regulated ScenarioCC BY · PubMed Central
Fig. 6 Schematic flow diagram of the Storage Security Calculator program. The program relies on 26 input parameters, each are called in at least one of the models. These parameters are listed in Table 3, along with the values applied. Discussion of how the values were derived is provided in the Supplementary Information Section 2
Fig. 6 Schematic flow diagram of the Storage Security Calculator program. The program relies on 26 input parameters, each are called in at least one of the models. These parameters are listed in Table 3, along with the values applied. Discussion of how the values were derived is provided in the Supplementary Information Section 2CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 53 references

Research works printed but not linked: 1

  1. Metz, B., Davidson, O., de Coninck, H., Loos, M. & Meyer, L. Special Report on Carbon Dioxide Capture and Storage (Cambridge University Press, New York, 2005).

Cited by

See all 467

Metadata

Authors
Alcalde, J., Flude, S., Wilkinson, M., Johnson, G., Edlmann, K., Bond, C. E., Scott, V., Gilfillan, S. M. V., Ogaya, X., & Haszeldine, R. S.
Affiliations
  • University of Aberdeen (GB)
  • University of Edinburgh (GB)
  • Universitat de Barcelona (ES)
Corresponding author
Alcalde, Juan
Venue
Nature Communications
Published
2018-06-12
Volume
9
Issue
1
Pages
2201-2201
ISSN
2041-1723 (ISSN-L)
OpenAlex
W2797035059
Cited by
442
References
53
Citations by year
2026: 74 · 2025: 97 · 2024: 65 · 2023: 52 · 2022: 47 · 2021: 51 · 2020: 34 · 2019: 17 · 2018: 5
FWCI
13.44
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • Strathprints: The University of Strathclyde institutional repository (University of Strathclyde) (acceptedVersion)
  • Aberdeen University Research Archive (Aberdeen University) (submittedVersion)
  • EarthArXiv (California Digital Library) (submittedVersion, cc-by)
  • RePEc: Research Papers in Economics (submittedVersion)
  • DIGITAL.CSIC (Spanish National Research Council (CSIC)) (submittedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • Edinburgh Research Explorer (University of Edinburgh) (submittedVersion, other-oa)
  • EarthArXiv (OSF Preprints) (submittedVersion, cc-by)
  • EarthArXiv (OSF Preprints) (submittedVersion)
Funders
  • Scottish Funding Council (EP/P026214/1)
  • Horizon 2020 Framework Programme (636811)
  • Engineering and Physical Sciences Research Council (EP/K036033/1, EP/P026214/1, H2020, EP/K000446/2)
  • Natural Environment Research Council (EP/P026214/1, NE/G015163/1, NE/P019749/1, NE/M007251/1, NE/L008475/1)
Topics
  • Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
  • Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
  • Physical Sciences › Environmental Science › Global and Planetary Change › Climate Change and Geoengineering
Keywords
CO2 geological storage, carbon capture and storage, CO2 leakage, storage security, storage regulations, well density, climate change mitigation, Paris Agreement commitments, numerical modeling

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Estimating geological CO2 storage security to deliver on climate mitigation. https://app.cochat.ai/papers/10.1038/s41467-018-04423-1
The paper
Alcalde, J., Flude, S., Wilkinson, M., Johnson, G., Edlmann, K., Bond, C. E., Scott, V., Gilfillan, S. M. V., Ogaya, X., & Haszeldine, R. S. (2018). Estimating geological CO2 storage security to deliver on climate mitigation. Nature Communications. https://doi.org/10.1038/s41467-018-04423-1

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.