The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Convective heat transfer and pressure losses across novel heat sinks fabricated by Selective Laser Melting
Open accessAbstract
Abstract This study presents the thermal and fluid flow characteristics of five heat sinks that have been fabricated by a rapid manufacturing technique known as Selective Laser Melting. The five heat sinks consist of two conventional designs, the cylindrical pin and rectangular fin array, for comparison purposes, and three novel heat sinks: a staggered elliptical array; a lattice; and a rectangular fin array with rounded corners. The experimental results for the rectangular fin were compared with data from the literature and were found to be consistent. The rectangular fin with rounded corners proved able to transfer the largest amount of heat whilst improving upon the pressure drop performance of the standard rectangular fin array. Although the lattice arrangement made use of the fabrication process’ ability to manufacture heat sinks with high surface area to volume ratios, its performance was limited by the lack of interaction between the cooling air and structure. In terms of both heat transfer performance and pressure drop, the staggered elliptical array, which cannot be manufactured by conventional techniques, outperformed the other heat sinks.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
DeJong, N. C., Zhang, L. W., Jacobi, A. M., Balachandar, S., & Tafti, D. K. (1998) · Journal of Heat Transfer · doi:10.1115/1.2824338 · Cited by 56
Cited by
Aboulkhair, N. T., Simonelli, M., Parry, L., Ashcroft, I., Tuck, C., & Hague, R. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100578 · Cited by 1,552
The microstructure and mechanical properties of deposited-IN718 by selective laser melting
Wang, Z., Guan, K., Gao, M., Li, X., Chen, X., & Zeng, X. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2011.10.107 · Cited by 812
Properties and applications of additively manufactured metallic cellular materials: A review
du Plessis, A., Razavi, N., Benedetti, M., Murchio, S., Leary, M., Watson, M., Bhate, D., & Berto, F. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100918 · Cited by 623
Li, R., Shi, Y., Wang, Z., Wang, L., Liu, J., & Jiang, W. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.02.030 · Cited by 473
Maskery, I., Aremu, A. O., Parry, L., Wildman, R. D., Tuck, C. J., & Ashcroft, I. A. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.05.058 · Cited by 441
Metadata
- Authors
- Wong, M., Owen, I., Sutcliffe, C. J., & Puri, A.
- Venue
- International Journal of Heat and Mass Transfer
- Publisher
- Elsevier BV
- Published
- 2009-01
- Volume
- 52
- Issue
- 1-2
- Pages
- 281-288
- ISSN
- 0017-9310 (ISSN-L)
- OpenAlex
- W2024298016
- Cited by
- 236
- References
- 1
- FWCI
- 4.27
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Convective heat transfer and pressure losses across novel heat sinks fabricated by Selective Laser Melting. https://app.cochat.ai/papers/10.1016/j.ijheatmasstransfer.2008.06.002
- The paper
- Wong, M., Owen, I., Sutcliffe, C. J., & Puri, A. (2009). Convective heat transfer and pressure losses across novel heat sinks fabricated by Selective Laser Melting. International Journal of Heat and Mass Transfer. https://doi.org/10.1016/j.ijheatmasstransfer.2008.06.002
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.