The DOI matches its Crossref record.
Rough surfaces with enhanced heat transfer for electronics cooling by direct metal laser sintering
Open accessAbstract
Experimental evidences are reported on the potential of direct metal laser sintering (DMLS) in manufacturing flat and finned heat sinks with a remarkably enhanced convective heat transfer coefficient, taking advantage of artificial roughness in fully turbulent regime. To the best of our knowledge, this is the first study where artificial roughness by DMLS is investigated in terms of such thermal performances. On rough flat surfaces, we experience a peak of 73% for the convective heat transfer enhancement (63% on average) compared to smooth surfaces. On rough (single) finned surfaces, the best performance is found to be 40% (35% on average) compared to smooth finned surface. These results refer to setups with Reynolds numbers (based on heated edge) within 3500≲ReL≲16,500 (corresponding to 35,000≲ReD≲165,000 in terms of Reynolds number based on hydraulic diameter). Experimental data are obtained by a purposely developed sensor with maximum and mean estimated tolerance intervals of ±7.0% and ±5.4%, respectively. Following the idea by Gioia et al. (2006) [48], we propose that heat transfer close to the wall is dominated by eddies with size depending on the roughness dimensions and the viscous (Kolmogórov) length scale. An excellent agreement between the experimental data and the proposed analytical model is finally demonstrated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review on turbulent flow over rough surfaces: Fundamentals and theories
Kadivar, M., Tormey, D., & McGranaghan, G. (2021) · International Journal of Thermofluids · doi:10.1016/j.ijft.2021.100077 · Cited by 374
State-of-the-art in heat exchanger additive manufacturing
Kaur, I., & Singh, P. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.121600 · Cited by 319
Dede, E. M., Joshi, S. N., & Zhou, F. (2015) · Journal of Mechanical Design · doi:10.1115/1.4030989 · Cited by 312
Jafari, D., & Wits, W. W. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.03.109 · Cited by 289
Chen, S.-G., Gao, H.-J., Zhang, Y.-D., Wu, Q., Gao, Z.-H., & Zhou, X. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.02.054 · Cited by 274
Metadata
- Authors
- Ventola, L., Robotti, F., Dialameh, M., Calignano, F., Manfredi, D., Chiavazzo, E., & Asinari, P.
- Venue
- International Journal of Heat and Mass Transfer
- Publisher
- Elsevier BV
- Published
- 2014-08
- Volume
- 75
- Pages
- 58-74
- ISSN
- 0017-9310 (ISSN-L)
- OpenAlex
- W2034816967
- Cited by
- 207
- References
- 0
- FWCI
- 15.19
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Rough surfaces with enhanced heat transfer for electronics cooling by direct metal laser sintering. https://app.cochat.ai/papers/10.1016/j.ijheatmasstransfer.2014.03.037
- The paper
- Ventola, L., Robotti, F., Dialameh, M., Calignano, F., Manfredi, D., Chiavazzo, E., & Asinari, P. (2014). Rough surfaces with enhanced heat transfer for electronics cooling by direct metal laser sintering. International Journal of Heat and Mass Transfer. https://doi.org/10.1016/j.ijheatmasstransfer.2014.03.037
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.