The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Thermal management optimization of a prismatic battery with shape-stabilized phase change material
Abstract
In this paper, a three-dimensional thermal model of a prismatic battery with multi-layer structure was established and validated by the measured surface temperature of the battery. The proposed model was used to analyze and optimize thermal performance of the battery in three cases that its surface was integrated with one of three shape-stabilized phase change material (PCM) configurations. The results showed that the internal anisotropic characteristics of the prismatic battery have significant effect on the heat transfer and thermal performance of the configurations. The configuration that PCM wrapped around the battery had the best performing temperature rising and distribution due to the large thermal storage capacity of PCM and highest contact area between the PCM and the battery. Furthermore, there were critical values of PCM thickness and convective heat transfer coefficient (e.g., 2.08 mm and 10 W m−2 K−1 for PCM around the cell) at which the process of phase change was almost completed, and the temperature distribution was significantly different across these values. The temperature gradient across the cell decreased as the thickness increased. However, the effect of increasing convective heat transfer coefficient on the decrease of temperature gradient was limited due to the relatively low internal heat conduction ability of the battery.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A General Energy Balance for Battery Systems
Bernardi, D., Pawlikowski, E., & Newman, J. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2113792 · Cited by 2,548
Samimi, F., Babapoor, A., Azizi, M., & Karimi, G. (2016) · Energy · doi:10.1016/j.energy.2015.12.064 · Cited by 372
Composites Enhance Heat Transfer in Paraffin/Melamine Resin Microencapsulated Phase Change Materials
Liu, C., Rao, Z., & Li, Y. (2016) · Energy Technology · doi:10.1002/ente.201500309 · Cited by 27
Cited by
Review on battery thermal management system for electric vehicles
Kim, J., Oh, J., & Lee, H. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.12.020 · Cited by 1,292
A critical review of battery thermal performance and liquid based battery thermal management
Wu, W., Wang, S., Wu, W., Chen, K., Hong, S., & Lai, Y. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.12.051 · Cited by 1,214
Self-citationResearch progress on power battery cooling technology for electric vehicles
Lu, M., Zhang, X., Ji, J., Xu, X., & Zhang, Y. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2019.101155 · Cited by 434
Akbarzadeh, M., Kalogiannis, T., Jaguemont, J., Jin, L., Behi, H., Karimi, D., Beheshti, H., Van Mierlo, J., & Berecibar, M. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117503 · Cited by 431
Kong, D., Peng, R., Ping, P., Du, J., Chen, G., & Wen, J. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.112280 · Cited by 423
Metadata
- Authors
- Wu, W., Wu, W., & Wang, S.
- Venue
- International Journal of Heat and Mass Transfer
- Publisher
- Elsevier BV
- Published
- 2018-06
- Volume
- 121
- Pages
- 967-977
- ISSN
- 0017-9310 (ISSN-L)
- OpenAlex
- W2789862238
- Cited by
- 222
- References
- 3
- FWCI
- 8.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermal management optimization of a prismatic battery with shape-stabilized phase change material. https://app.cochat.ai/papers/10.1016/j.ijheatmasstransfer.2018.01.062
- The paper
- Wu, W., Wu, W., & Wang, S. (2018). Thermal management optimization of a prismatic battery with shape-stabilized phase change material. International Journal of Heat and Mass Transfer. https://doi.org/10.1016/j.ijheatmasstransfer.2018.01.062
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.