The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Optimal design and thermal modelling for liquid-cooled heat sink based on multi-objective topology optimization: An experimental and numerical study
Abstract
Abstract This work suggests a design method of liquid-cooled heat sink based on topology optimization. First, a multi-objective optimization problem is developed in order to manage the tradeoff between the minimization of fluid power dissipation and the maximization of heat exchange. The novel cooling channels with clear topology information are generated under both single-uniform and the multiple-non uniform heat source conditions. The effects of initial guess, weighting factor, and Reynolds number on the Pareto optimal solutions are discussed. Next, a full scale 3D conjugate heat transfer numerical model is built to test the flow and thermal performances of the heat sinks. The results show that the optimized cooling channel can achieve a lower thermal resistance and a higher Nusselts number in comparison to the conventional parallel channel, which means the optimal channel can remove more heat energy while the pumping power supply is minimum. Finally, both traditional parallel and topology optimized channel are manufactured by CNC machine and the high performance of the optimally designed heat sink is validated by conducting experimental tests.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High-performance heat sinking for VLSI
Tuckerman, D. B., & Pease, R. F. W. (1981) · IEEE Electron Device Letters · doi:10.1109/edl.1981.25367 · Cited by 5,291
Sigmund, O., & Petersson, J. (1998) · Structural Optimization · doi:10.1007/bf01214002 · Cited by 2,118
On projection methods, convergence and robust formulations in topology optimization
Wang, F., Lazarov, B. S., & Sigmund, O. (2011) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-010-0602-y · Cited by 1,859
Sequential quadratic programming
Boggs, P. T., & Tolle, J. W. (1995) · Acta Numerica · doi:10.1017/s0962492900002518 · Cited by 1,858
The Fluid Mechanics of Microdevices—The Freeman Scholar Lecture
Gad-el-Hak, M. (1999) · Journal of Fluids Engineering · doi:10.1115/1.2822013 · Cited by 1,318
Theory and design for mechanical measurements
Figliola, R. S., & Beasley, D. E. (1996) · Measurement Science and Technology · doi:10.1088/0957-0233/7/7/016 · Cited by 1,269
Topology optimization of fluids in Stokes flow
Borrvall, T., & Petersson, J. (2003) · International Journal for Numerical Methods in Fluids · doi:10.1002/fld.426 · Cited by 1,234
Filters in topology optimization based on Helmholtz‐type differential equations
Lazarov, B. S., & Sigmund, O. (2011) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.3072 · Cited by 1,142
An Introduction to the Adjoint Approach to Design
Giles, M. B., & Pierce, N. A. (2000) · Flow, Turbulence and Combustion · doi:10.1023/a:1011430410075 · Cited by 989
Design of multiphysics actuators using topology optimization – Part I: One-material structures
Sigmund, O. (2001) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(01)00251-1 · Cited by 613
Metadata
- Authors
- Li, H., Ding, X., Meng, F., Jing, D., & Xiong, M.
- Venue
- International Journal of Heat and Mass Transfer
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 144
- Pages
- 118638
- ISSN
- 0017-9310 (ISSN-L)
- OpenAlex
- W2971031129
- Cited by
- 256
- References
- 34
- FWCI
- 10.28
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Optimal design and thermal modelling for liquid-cooled heat sink based on multi-objective topology optimization: An experimental and numerical study. https://app.cochat.ai/papers/10.1016/j.ijheatmasstransfer.2019.118638
- The paper
- Li, H., Ding, X., Meng, F., Jing, D., & Xiong, M. (2019). Optimal design and thermal modelling for liquid-cooled heat sink based on multi-objective topology optimization: An experimental and numerical study. International Journal of Heat and Mass Transfer. https://doi.org/10.1016/j.ijheatmasstransfer.2019.118638
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.