700 bar type IV high pressure hydrogen storage vessel burst – Simulation and experimental validation

Progressive damage modeling in fiber-reinforced materials

Lapczyk, I., & Hurtado, J. A. (2007) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.01.017 · Cited by 1,084

Micromechanical modeling of damage and fracture of unidirectional fiber reinforced composites: A review

Mishnaevsky, L., & Brøndsted, P. (2008) · Computational Materials Science · doi:10.1016/j.commatsci.2008.09.004 · Cited by 151

New generation of filament-wound composite pressure vessels for commercial applications

Vasiliev, V. V., Krikanov, A. A., & Razin, A. F. (2003) · Composite Structures · doi:10.1016/j.compstruct.2003.09.019 · Cited by 150

Analysis of filament wound composite structures considering the change of winding angles through the thickness direction

Park, J., Hong, C.-S., Kim, C., & Kim, C.-U. (2002) · Composite Structures · doi:10.1016/s0263-8223(01)00137-4 · Cited by 129

Design of filament–wound domes based on continuum theory and non-geodesic roving trajectories

Zu, L., Koussios, S., & Beukers, A. (2010) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.05.015 · Cited by 108

Hydrogen storage for fuel cell systems with stationary applications— I. Transient measurement technique for packed bed evaluation

Lévesque, S. (2000) · International Journal of Hydrogen Energy · doi:10.1016/s0360-3199(00)00023-9 · Cited by 70

A new method for predicting dome thickness of composite pressure vessels

Wang, R., Jiao, W., Liu, W., & Yang, F. (2010) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684410376330 · Cited by 56

Progressive failure analysis of a composite shell

Spottswood, S. M., & Palazotto, A. N. (2001) · Composite Structures · doi:10.1016/s0263-8223(00)00183-5 · Cited by 54

Two-scale analysis of a filament-wound cylindrical structure and application of periodic boundary conditions

Zhang, Y., Xia, Z., & Ellyin, F. (2008) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2008.05.026 · Cited by 51

Residual stress and thermal expansion of graphite epoxy laminates subjected to cryogenic temperatures

IFJU, P. G., Myers, D. G., & Schulz, W. A. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.02.011 · Cited by 42

Experimental Simultaneous Measurement of Ultrasonic Properties and Thickness for Defect Detection in Curved Polymer Samples

Arciniegas, A., Achdjian, H., Bustillo, J., Meulen, F. V., & Fortineau, J. (2017) · Journal of Nondestructive Evaluation · doi:10.1007/s10921-017-0427-3 · Cited by 12

Understanding cracking behavior in type I hydrogen storage vessels and critical crack size assessment

Beak, U. B., Park, J., Bae, K.-O., & Nguyen, T. T. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.12.478 · Cited by 11

Study on fracture evaluation in hydrogen environment in 316L stainless steel used in high pressure hydrogen tank

Patra, S., Mallisetty, P. K., Murmu, N. C., Hirani, H., & Samanta, P. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.05.467 · Cited by 11

Filament wound composite fatigue mechanisms investigated with full field DIC strain monitoring

Hugaas, E., & Echtermeyer, A. T. (2021) · Open Engineering · doi:10.1515/eng-2021-0041 · Cited by 11

Achieving Wide-Temperature-Range Physical and Chemical Hydrogen Sorption in a Structural Optimized Mg/N-Doped Porous Carbon Nanocomposite

Li, Y., Ren, L., Li, Z., Yao, Y., Lin, X., Ding, W., Ferrari, A. C., & Zou, J. (2026) · Nano-Micro Letters · doi:10.1007/s40820-025-01931-w · Cited by 10

Thermal-fluid-structure coupling progressive failure analysis for the type III composite cylinder under localized fire

Li, Q., Huang, G., Qi, L., Jin, C., Zhao, Y., Qiu, S., Gu, C., & Hua, Z. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.12.016 · Cited by 10

Prediction and optimization of failures in high-pressure hydrogen storage vessels: A review

Liang, J., Li, C., Liu, J., Feng, J., Chen, Z., Li, Y., Wu, T., & Zhang, X. (2025) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2025.116236 · Cited by 10

A Comprehensive Study on Burst Pressure Performance of Aluminum Liner for Hydrogen Storage Vessels

Kangal, S., Sayı, A. H., Ayakdaş, O., Kartav, O., Aydın, L., Artem, H. S., Aktaş, E., Yücetürk, K., Tanoğlu, M., Kandemir, S., et al. (2021) · Journal of Pressure Vessel Technology · doi:10.1115/1.4049644 · Cited by 10

Optimal dome design for 700 bar hydrogen tank type IV : Hyperelliptic functions and shape factor

Tcharkhtchi, A., Villalonga, S., Zirak, N., Lucas, A., Farzaneh, S., & Shirinbayan, M. (2023) · Energy Storage · doi:10.1002/est2.469 · Cited by 10

Kinetic Analysis on Spontaneous Combustion of Pressurized Hydrogen in Tubes

Zhuo, X., & Gou, X. (2021) · ACS Omega · doi:10.1021/acsomega.1c03761 · Cited by 10

Closed-form analytical model for the cylinder region of thick-walled composite pressure vessels for hydrogen storage

Hondekyn, M., Ali, N., & Paepegem, W. V. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.08.447 · Cited by 9

Reliability design of hydrogen storage cylinders based on nano-toughened composite materials

Duan, S., Li, M., Zhu, M., Zeng, X., Zhang, C., Lu, X., & Shang, L. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.03.047 · Cited by 9

Influence of circumferential ply drop location and lay-up sequence on the failure behavior of type Ⅳ composite pressure vessels: a numerical and experimental study

Wang, T., Liang, J., Li, Y., Wu, T., Liu, J., & Zhang, X. (2025) · Composites Part B Engineering · doi:10.1016/j.compositesb.2025.112861 · Cited by 9

Risk and safety assessment of hydrogen pipelines and storage tanks using preliminary hazard analysis

Asante‐Okyere, S., Mensah, R. A., Sandström, J., & Försth, M. (2025) · Frontiers in Chemical Engineering · doi:10.3389/fceng.2025.1722173 · Cited by 9

High pressure and long-term gas diffusion coupled damage of composites through a multi-physical phase field framework

Ma, P., & Zhang, L. (2023) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2023.116006 · Cited by 9

Simulation Analysis and Optimization Design of Dome Structure in Filament Wound Composite Shells

Zhou, Y., Zou, Y., Xia, Q., Cao, L., Zhang, M., Shen, T., & Du, J. (2025) · Polymers · doi:10.3390/polym17101421 · Cited by 8

Finite Element Analysis Framework for Structural Safety Evaluation of Type IV Hydrogen Storage Vessel

Kim, G. H., Kim, H., Park, H., Park, K., Yoon, S., Lee, H., Lee, S., Kim, J., Yoo, G.-J., Youn, Y., et al. (2025) · Hydrogen · doi:10.3390/hydrogen6030044 · Cited by 8

Design and Analysis of Solid Rocket Composite Motor Case Connector Using Finite Element Method

Zhu, L., Wang, J., Shen, W. Q., Chen, L., & Zhu, C. (2022) · Polymers · doi:10.3390/polym14132596 · Cited by 8

Progressive Fatigue Failure Analysis of a Filament Wound Ring Specimen with a Hole

Hugaas, E., Vedvik, N. P., & Echtermeyer, A. T. (2021) · Journal of Composites Science · doi:10.3390/jcs5090251 · Cited by 8

Optimizing Sealing Structure Design for Enhanced Sealing Performance in Type IV Hydrogen Storage Vessels

Yan, Z., Chen, Y., Liu, Y., Wang, X., Chen, Z., Xie, P., & Yang, W. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.57050 · Cited by 7

Proposal of a Short-Body Hydrogen Pressure Vessel to Assess the Burst Performance of Long-Body/Large-Capacity Vessels

Hwang, J.-S., Ko, K.-H., & Jung, G.-S. (2022) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-022-00757-5 · Cited by 6

Influence of layered design and reinforcement angle on the structural strength of the dome reinforcement layer for 70 MPa Type Ⅳ hydrogen storage cylinders

Tian, W., Zhang, X., Liu, J., Gao, H., Wu, T., Chen, Z., & Liang, J. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.151883 · Cited by 6

Refueling analysis of Type IV composite tank as per SAEJ2601 with refueling station configuration

Gupta, C., Kumar, S. B., Poonia, S., & Pareek, K. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.06.300 · Cited by 6

Hydrogen storage and delivery challenges

Hosseini, S. E. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-88671-0.00003-6 · Cited by 6

Numerical Simulation Study on the Diffusion Characteristics of High-Pressure Hydrogen Gas Leakage in Confined Spaces

Li, F., Zhang, Y., Wei, Z., Yuan, L., Li, J., Gong, L., & Zhu, C. (2024) · Processes · doi:10.3390/pr12122711 · Cited by 5

Failure mode determination of large capacity type IV hydrogen storage cylinders

Feng, H., Yang, C., Liu, Z., Zhan, H., & Deng, G. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.150842 · Cited by 5

Ellipsoidal compressed gaseous hydrogen CFRP vessels with increased energy storage density: Combined analytical–numerical design methodology

Richter, J., Schlegel, D., Spitzer, S., & Gude, Μ. (2025) · Composite Structures · doi:10.1016/j.compstruct.2025.119887 · Cited by 5

Response-Only Damage Detection Approach of CFRP Gas Tanks Using Clustering and Vibrational Measurements

Zacharakis, I., & Giagopoulos, D. (2021) · Applied Mechanics · doi:10.3390/applmech2040061 · Cited by 5

Design of Type 3 High-Pressure Vessel Liner (Al 6061) for Hydrogen Vehicles

Lee, C., Park, G., & Kim, C. S. (2022) · Journal of Pressure Vessel Technology · doi:10.1115/1.4054366 · Cited by 5

Physical-based hydrogen storage

Zendehboudi, S., & Ghorbani, B. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-24042-3.00003-5 · Cited by 5

Thermal behavior analysis during the refueling process of Cryo-compressed hydrogen storage vessels

Wang, H., Wang, H., Xiao, Z. J., Yao, N., Wang, X., & Wang, X. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.117110 · Cited by 5

Mechanical behavior and fracture analysis of the cylindrical component of type‐III high‐pressure composite tanks

Avcu, A., Seyedzavvar, M., Boğa, C., & Choupani, N. (2024) · Polymer Composites · doi:10.1002/pc.29371 · Cited by 4

Moment-independent sensitivity analysis for type IV hydrogen cylinder by combining polynomial chaos expansion and Gaussian kernel

Wang, Y., Lou, X., Wan, P., Liu, Y., He, W., & Li, G. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.150767 · Cited by 4

Analysis and optimal design of Boss for Type-Ⅳ pressure vessel

Tan, Y., Liu, W., & Bai, Y. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.150936 · Cited by 4

Design optimization of type 4 composite pressure vessel considering the effects of fabrication conditions

Kim, Y., & Kim, M. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.152579 · Cited by 4

Assessing the safety and reliability of type-3 high-pressure composite tanks: a comprehensive analysis of failure metrics

Avcu, A., Seyedzavvar, M., Boğa, C., & Choupani, N. (2024) · Sadhana · doi:10.1007/s12046-023-02394-8 · Cited by 4

Hydrogen Storage Vessels of Type 4 and Type 5

Kadri, K., Abdallah, A. B., & Ballut, S. (2024) · IntechOpen eBooks · doi:10.5772/intechopen.1005520 · Cited by 5

Influence of composite material laying parameters on the load-carrying capacity of type IV hydrogen storage vessel

Zhang, Q., Jiang, W., Yan, J., Bai, J., Fan, H., & Wang, B. (2024) · Science and Engineering of Composite Materials · doi:10.1515/secm-2024-0046 · Cited by 4

Thermoplastic Alternatives to Thermosets in Type IV COPVs : A Review of Materials, Manufacturing, and Performance for Hydrogen Storage

Jaffel, L., Ejday, M., Pastor, M., Guermazi, N., Guennec, C. L., & Grohens, Y. (2025) · Polymer Composites · doi:10.1002/pc.70541 · Cited by 3

Integrated 2D-3D parametric modeling and simulation platform for optimized design of machine-wound composite pressure vessels

Huang, J., Liang, J., Gao, H., Ren, J., & Xu, Z. Y. (2025) · Composite Structures · doi:10.1016/j.compstruct.2025.119783 · Cited by 3

A Review of Hydrogen Strategies in South, Southeast, and Southwest Asia: National Outlooks and Collaboration Opportunities for Canada

Ghorbani, B., Zendehboudi, S., Bagheri, M., Saady, N. M. C., Albayati, T. M., & Venkatachalam, P. (2026) · Energy & Fuels · doi:10.1021/acs.energyfuels.5c04988 · Cited by 3

Numerical Fatigue Life Evaluation With Experimental Results for Type III Accumulators

Kim, S., & YOSHIKAWA, N. (2023) · Journal of Pressure Vessel Technology · doi:10.1115/1.4063042 · Cited by 3

Molecular Dynamics Study on Hugoniot State and Mie–Grüneisen Equation of State of 316 Stainless Steel for Hydrogen Storage Tank

Li, Y., Wang, H., Chi, M., Zeng, X., Wang, Y., & Zhao, P. (2023) · Materials · doi:10.3390/ma16020628 · Cited by 3

Fatigue life evaluation on type III carbon fiber fully wound tube trailer cylinder with pre-strain effect

Shao, Z.-X., Gong, J., Yuan, Y., & Xuan, F. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.150805 · Cited by 2

Modeling theory of the FEM model and hydrostatic burst test for a composite overwrapped pressure vessel

Gu, F., Chen, Z., Wang, H., Xiao, H., & Jin, Y. (2026) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2026.153876 · Cited by 2

A scalable deep learning approach for robust acoustic emission-based damage classification in composite pressure vessels

Ghaznavi, A., Duffner, E., Kästle, E. D., & Popiela, B. (2026) · Results in Engineering · doi:10.1016/j.rineng.2026.110668 · Cited by 2

Integrated energy flexible building and e-mobility with demand-side management and model predictive control

Dan, Z., & Zhou, Y. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-13177-6.00011-4 · Cited by 2

Computational study of type IV hydrogen tanks

Jella, S., Burela, R. G., Gupta, A., & Bhadoria, S. K. (2024) · AIP conference proceedings · doi:10.1063/5.0192690 · Cited by 2

Thermo-mechanical stress characteristics and sensitivity analysis of cryo-compressed hydrogen storage vessels

Li, K., Dong, X., Wang, H., & Gong, M. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.153233 · Cited by 1

Study on structural design and stress simulation of carbon fiber composite Type IV hydrogen storage cylinder

Li, J., Zhao, C., Gao, J., & Guo, H. (2026) · Scientific Reports · doi:10.1038/s41598-025-18865-3 · Cited by 1

Hydrostatic failure of composite thin-walled eggshells fabricated through a lay-up process

Li, Z., Hu, Y., Hu, X., & Zhang, J. (2026) · Thin-Walled Structures · doi:10.1016/j.tws.2026.115502 · Cited by 1

Analysis of the resistance of adhesively bonded joints with rigid-flexible substrates

Dicosta, F., Morano, C., Alfano, M., & Furgiuele, F. M. (2021) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/1038/1/012017 · Cited by 1

A Study on Multi-Layer Insulation Spacer Materials for Liquid Hydrogen Storage Tank for Hydrogen Commercial Vehicle

Park, J., Jeoung, S. K., Kang, D. W., Shin, G. S., Lee, S.-Y., & Cho, B.-G. (2023) · Transactions of Korean Society of Automotive Engineers · doi:10.7467/ksae.2023.31.4.247 · Cited by 1

Supplementary theoretical design framework for Type IV hydrogen storage vessel liners: A minimum wall thickness addressing discharge buckling failure

Wang, X., Yan, Z., Xie, P., & Yang, W. (2025) · Clean Energy Science and Technology · doi:10.18686/cest447 · Cited by 1

EVALUATION OF OPTIMUM CONFIGURATIONS FOR COMPOSITE OILFIELD THREE-PHASE SEPARATOR PRESSURE VESSEL

Hassan, A. A., Abo-Elkhier, M., & El-bary, B. A. (2020) · ERJ Engineering Research Journal · doi:10.21608/erjm.2020.72111

Development of a fast local analysis tool for optimized laser assisted tape winding

Zaami, A. (2020) · doi:10.3990/1.9789036551205

Prediction of First Ply Failure of Composite Pressure Vessels Under Internal Pressure: A review

Farhood, N. H., & Singal, A. H. (2022) · Anbar journal for engineering sciences/Mağallaẗ al-anbār li-l-ʻulūm al-handasiyyaẗ · doi:10.37649/aengs.2022.175883

A Study on the Hydrogen Degradation of HDPE by Hydrogen Pressure of 90 MPa

KIM, M., & LEE, C. H. (2023) · Journal of Hydrogen and New Energy · doi:10.7316/jhne.2023.34.3.307

Development Status of Hydrogen Storage and Application

谭, 凯. (2023) · Advances in Energy and Power Engineering · doi:10.12677/aepe.2023.114015

Data-Driven Lay-Up Design of a Type Ⅳ Hydrogen Storage Vessel Based on Physics-Constrained Generative Adversarial Networks (Pcgans)Preprint

Zhang, Y., Gu, J., Li, Z., Ruan, S., & Shen, C. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4799748

Lasttragende Leichtbau-Wasserstofftanks zur optimalen Bauraumausnutzung im Nutzfahrzeug

Motsch-Eichmann, N., Pfaff, T., & Hausmann, J. M. (2024) · Springer eBooks · doi:10.1007/978-3-658-45699-3_5

An Approximate Analytical Solution for Metal-FRP Circular Toroidal Pressure Vessel

Paleti, M. K., Prakash, S. S., & Narayanamurthy, V. (2024) · Lecture notes in mechanical engineering · doi:10.1007/978-981-97-6367-2_18

Integration of a novel hydrogen pressure vessel into small aircrafts

Hüppauff, J., Pfaff, T., Blass, U., Motsch-Eichmann, N., & Hausmann, J. M. (2025) · CEAS Aeronautical Journal · doi:10.1007/s13272-025-00859-6

Dome Profile Optimization and Stress Analysis of Type IV Composite Cylinders Using a CLT-Based MATLAB Program and FEA Validation

Nakandhrakumar, R. S., Tandi, R., Ramakrishnan, M., Raja, S., Elumalai, S., & Velmurugan, R. (2025) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2025-28-0374

Multi-Physics Coupling Mechanism of the Dynamic Sealing Performance of the O-Ring at the Neck of a Type IV Hydrogen Storage Cylinder Under Linearly Decreasing Filling Conditions

Zhang, E., Shi, X., Wang, W., & Wang, Z. (2025) · Symmetry · doi:10.3390/sym17111921

Hydrogen storage

Belhaj, H. A., & Aldhuhoori, M. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-32854-1.00006-3

Temperature-dependent failure behavior and lay-up optimization of CFRP layers in Type IV hydrogen storage vessels

Li, Y. M., Huang, W. J., Zhang, Y., Xiao, Z., & Li, W. G. (2026) · Composite Structures · doi:10.1016/j.compstruct.2026.120048

Control of Crystallization Behavior in PA1012 Liners for Type‐ IV Hydrogen Storage Tanks During Rotational Molding

Cheng, L., Mei, Z., Qi, L., Gao, R., Kang, D., Xiao, J., Guan, Q., Yu, M., & Sun, Z. (2026) · Polymer Engineering and Science · doi:10.1002/pen.70344

Geometric validation of a tape scale meshing tool for hydrogen tank modeling

Landron, G., Rassineux, A., Bovet, C., Fagiano, C., Hirsekorn, M., Baranger, E., & Espinassou, D. (2026) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2026.154170

Buckling behavior and burst-strength failure mechanisms of toughened polyamide 6 liners in type IV cryogenic compressed hydrogen storage vessels

Tian, W., Zhao, C., Liu, J., Gao, H., Wu, T., Chen, Z., Zhang, X., & Liang, J. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.121831

Synthesis, structural characterization and electrochemical hydrogen storage properties of LaNi5 and La4MgNi19 alloys prepared by mechanical alloying

Liu, Y. (2024) · doi:10.70675/6c86ed15z4bcbz43e2z99abz7fd1e87dec03

Structural feature based efficient local reinforcement design with robot-assisted fabrication of type IV hydrogen composite pressure vessels

Chen, H., Liu, H., Li, R., Zhang, Y., Hu, H., Cao, D., Zheng, K., & Li, S. (2026) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2026.155253

The influence of initial delamination defects on the low-velocity impact response of COPVs

Ouyang, Z., Liu, Z. Y., Han, J., & Ma, L. (2026) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2026.155595

Stereolithography-fabricated type IV hydrogen storage tank liners: Multi-scale characterization of photopolymer resin and structural validation under internal pressure

Vanaei, H. R., Lucas, A., Rastak, M., Fortineau, J., & Tcharkhtchi, A. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.123019

Techno-Economic Assessment of Integrated Upstream–Downstream Energy Systems for Decarbonized Mining Haulage

Li, J., Zhai, G., Wang, C., Medwell, P. R., Yuen, A. C. Y., Yeoh, G. H., Kook, S., & Chan, Q. N. (2026) · Energy & Fuels · doi:10.1021/acs.energyfuels.6c01101

Surpassing Neat PA6: Synergistic Enhancement of Toughness and Hydrogen Barrier Properties in OMMT-Containing PA6/POE- g -MAH/EVOH Nanocomposite

Li, Z., Zhu, B., ZHAO, Y., Sun, Y., Zhu, A., Cheng, X., Wang, Y., Wang, W. B., Zhou, M., & Qiao, K. (2026) · ACS Applied Polymer Materials · doi:10.1021/acsapm.6c01068

A novel FEM approach for the analysis of Type-IV hydrogen storage tank based on the enhanced Refined Zigzag Theory

Valoriani, F., Credo, G., & Gherlone, M. (2026) · Finite Elements in Analysis and Design · doi:10.1016/j.finel.2026.104607

A Machine Learning-Based Design Framework for Predicting the Minimum Laminate Configuration of Type IV Composite Overwrapped Pressure Vessels

An, J., & Yoo, H. (2026) · Applied Sciences · doi:10.3390/app16147066

Process-informed structural modeling of non-geodesic multi-filament wound composite pressure vessels with manufacturing-induced structural heterogeneity

Huang, J., Gao, H., Zhao, X., Yang, S., Zhang, X., Wu, T., Guo, S., & Liang, J. (2026) · Thin-Walled Structures · doi:10.1016/j.tws.2026.115646

Design of internal pressurization timing for filament-wound Type IV hydrogen storage vessels based on tension transmission loss and liner buckling

Kim, G. H., Park, K., & Kim, H. (2026) · Composite Structures · doi:10.1016/j.compstruct.2026.120880

Assessment of layer-wise stress redistribution in CFRP/GFRP hybrid lay-ups for type IV hydrogen pressure vessels

Kim, G. H., Park, K., & Kim, H. (2026) · International Journal of Pressure Vessels and Piping · doi:10.1016/j.ijpvp.2026.105963

Evolution of dry fiber yarn cross-sectional morphology during filament winding via the virtual fiber method

Lin, J., Dai, Y., Zheng, C., & Wang, D. (2026) · Composite Structures · doi:10.1016/j.compstruct.2026.120973

Egg-shaped Type V composite hydrogen vessels for autonomous underwater vehicles: simulated annealing and targeted enumeration identify a balanced Kevlar/epoxy laminate family

Jaber, H., & Jaber, M. (2026) · Results in Engineering · doi:10.1016/j.rineng.2026.113549

A fixed directions damage model for composite materials dedicated to hyperbaric type IV hydrogen storage vessel – Part I: Model formulation and identification

Ramirez, J. P. B., Halm, D., Grandidier, J.-C., & Villalonga, S. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.08.071 · Cited by 39

OSIRHYS IV Project, 700 Bar On-Board Composite Pressure Vessel Mechanical Behaviour Prediction With Uncertainties Knowledge

Villalonga, S., Kempeneers, M., Saffré, P., Renard, J., Halm, D., & Nony, F. (2011) · doi:10.1115/pvp2011-57668 · Cited by 1

A progressive failure analysis of a 700-bar type IV hydrogen composite pressure vessel

Leh, D., Saffré, P., Francescato, P., Arrieux, R., & Villalonga, S. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.05.061 · Cited by 105

Progressive failure analysis and burst mode study of type IV composite vessels

Jin, S., Cheng, P., Bai, Y., Paik, J. K., & Li, J. (2022) · Ships and Offshore Structures · doi:10.1080/17445302.2022.2157192 · Cited by 14

Composite pressure vessels for hydrogen storage in fire conditions: Fire tests and burst simulation

Halm, D., Fouillen, F., Lainé, É., Gueguen, M., Bertheau, D., & van Eekelen, T. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.06.088 · Cited by 77