Optimization and modeling of process parameters during hydrothermal gasification of biomass model compounds to generate hydrogen-rich gas products
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Abstract Hydrothermal gasification in subcritical and supercritical water is gaining attention as an attractive option to produce hydrogen from lignocellulosic biomass. However, for process optimization, it is important to understand the fundamental phenomenon involved in hydrothermal gasification of synthetic biomass or biomass model compounds, namely cellulose, hemicellulose and lignin. In this study, the response surface methodology using the Box-Behnken design was applied for the first time to optimize the process parameters during hydrothermal (subcritical and supercritical water) gasification of cellulose. The process parameters investigated include temperature (300–500 °C), reaction time (30–60 min) and feedstock concentration (10–30 wt%). Temperature was found to be the most significant factor that influenced the yields of hydrogen and total gases. Furthermore, negligible interaction was found between lower temperatures and reaction time while the interaction became dominant at higher temperatures. Hydrogen yield remained at about 0.8 mmol/g with an increase in the reaction time from 30 min to 60 min at the temperature range of 300–400 °C. When the temperature was raised to 500 °C, hydrogen yield started to elevate at longer reaction time. Maximum hydrogen yield of 1.95 mmol/g was obtained from supercritical water gasification of cellulose alone at 500 °C with 12.5 wt% feedstock concentration in 60 min. Using these optimal reaction conditions, a comparative evaluation of the gas yields and product distribution of cellulose, hemicellulose (xylose) and lignin was performed. Among the three model compounds, hydrogen yields increased in the order of lignin (0.73 mmol/g)
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Box-Behnken design: An alternative for the optimization of analytical methods
Ferreira, S. L. C., Bruns, R. E., Ferreira, H. S., Matos, G. D., David, J. M., Brandão, G. C., da Silva, E. G. P., Portugal, L. A., dos Reis, P. S., Souza, A. S., et al. (2007) · Analytica Chimica Acta · doi:10.1016/j.aca.2007.07.011 · Cited by 3,214
Hydrothermal liquefaction of biomass: A review of subcritical water technologies
Toor, S. S., Rosendahl, L., & Rudolf, A. (2011) · Energy · doi:10.1016/j.energy.2011.03.013 · Cited by 1,840
A review on the current status of various hydrothermal technologies on biomass feedstock
Kumar, M., Olajire Oyedun, A., & Kumar, A. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.270 · Cited by 534
Dahmoune, F., Spigno, G., Moussi, K., Remini, H., Cherbal, A., & Madani, K. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.06.035 · Cited by 285
Cited by
Chemistry and Specialty Industrial Applications of Lignocellulosic Biomass
Okolie, J. A., Nanda, S., Dalai, A. K., & Kozinski, J. A. (2021) · Waste and Biomass Valorization · doi:10.1007/s12649-020-01123-0 · Cited by 415
Self-citationA technical review of bioenergy and resource recovery from municipal solid waste
Nanda, S., & Berruti, F. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123970 · Cited by 392
Self-citationThermochemical conversion of plastic waste to fuels: A review
Nanda, S., & Berruti, F. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01094-7 · Cited by 383
Self-citationAwasthi, M. K., Sarsaiya, S., Patel, A., Juneja, A., Singh, R. P., Yan, B., Awasthi, S. K., Jain, A., Liu, T., Duan, Y., et al. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109876 · Cited by 376
Sarker, T. R., Pattnaik, F., Nanda, S., Dalai, A. K., Meda, V., & Naik, S. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.131372 · Cited by 365
Self-citation
Metadata
- Authors
- Okolie, J. A., Nanda, S., Dalai, A. K., & Kozinski, J. A.
- Venue
- International Journal of Hydrogen Energy
- Publisher
- Elsevier BV
- Published
- 2020-07
- Volume
- 45
- Issue
- 36
- Pages
- 18275-18288
- ISSN
- 0360-3199 (ISSN-L)
- OpenAlex
- W2953463185
- Cited by
- 121
- References
- 5
- FWCI
- 5.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.