The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index.
Solid oxide fuel cell: Decade of progress, future perspectives and challenges
Abstract
In an increasing demand of renewable energy resources, fuel cell represents the highly efficient, clean and sustainable energy conversion source. Broadly speaking, fuel cell can be divided into six different categories according to the types of electrolyte and fuels used. Each type of fuel cells has their own advantages and disadvantages. Among them, solid oxide fuel cell (SOFC) gains significant attentions due to their high efficiency, cost-effectiveness and the possibility to utilize variety of fuels other than hydrogen such as hydrocarbons, coal gas etc. As name implies, SOFC uses solid electrolyte for their operation. Indeed, in medium and large power requirement sectors, SOFC are highly suitable. In the present review article, recent advances and future perspectives of SOFC have been discussed via reviewing the literature over last five years. Most of the available review articles discussed the literature in terms of specific SOFC component such as anode, cathode, electrolytes and so on. In contrast, herein the literatures have been reviewed in the context of two types of SOFC stack designs i.e. planar and tubular that have been immensely used to fabricate efficient SOFC devices. Furthermore, fundamental of SOFC operation and its typical I–V characteristics and SOFC designs are also discussed in detail. Furthermore, preparation techniques for planar and tubular SOFC are briefly described. Finally, some of the recent trends in SOFC technology along with challenges and future perspectives are presented in this review article.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Minh, N. Q. (1993) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1993.tb03645.x · Cited by 3,839
A high-performance cathode for the next generation of solid-oxide fuel cells
Shao, Z., & Haile, S. M. (2004) · Nature · doi:10.1038/nature02863 · Cited by 3,158
A review of renewable energy sources, sustainability issues and climate change mitigation
Owusu, P. A., & Asumadu-Sarkodie, S. (2016) · Cogent Engineering · doi:10.1080/23311916.2016.1167990 · Cited by 2,831
Lowering the Temperature of Solid Oxide Fuel Cells
Wachsman, E. D., & Lee, K. T. (2011) · Science · doi:10.1126/science.1204090 · Cited by 2,554
An overview of fuel cell technology: Fundamentals and applications
Sharaf, O. Z., & Orhan, M. F. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.01.012 · Cited by 1,859
Solid oxide fuel cells (SOFCs): a review of an environmentally clean and efficient source of energy
Stambouli, A. B., & Traversa, E. (2002) · Renewable and Sustainable Energy Reviews · doi:10.1016/s1364-0321(02)00014-x · Cited by 1,775
Progress in material selection for solid oxide fuel cell technology: A review
Mahato, N., Banerjee, A., Gupta, A., Omar, S., & Balani, K. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.01.001 · Cited by 1,536
Yang, L., Wang, S., Blinn, K., Liu, M., Liu, Z., Cheng, Z., & Liu, M. (2009) · Science · doi:10.1126/science.1174811 · Cited by 1,225
A review on fuel cell technologies and power electronic interface
Kirubakaran, A., Jain, S., & Nema, R. K. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.04.004 · Cited by 1,035
Biogas from waste and renewable resources: an introduction
(2009) · Choice Reviews Online · doi:10.5860/choice.46-2682 · Cited by 931
Analysis of Fossil Fuel Energy Consumption and Environmental Impacts in European Countries
Martins, F., Felgueiras, C., Smitkova, M., & Caetano, N. (2019) · Energies · doi:10.3390/en12060964 · Cited by 913
Polarization Effects in Intermediate Temperature, Anode‐Supported Solid Oxide Fuel Cells
Kim, J., Virkar, A. V., Fung, K., Mehta, K., & Singhal, S. C. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1391566 · Cited by 631
Progress in metal-supported solid oxide fuel cells: A review
Tucker, M. C. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.02.035 · Cited by 505
Properties and development of Ni/YSZ as an anode material in solid oxide fuel cell: A review
Prakash, B. S., Kumar, S. S., & Aruna, S. T. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.04.043 · Cited by 490
Jiang, S. P. (2019) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2019.01.212 · Cited by 486
Sulfur-tolerant anode materials for solid oxide fuel cell application
Gong, M., Liu, X., Trembly, J., & Johnson, C. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.03.026 · Cited by 378
Yang, L., Choi, Y., Qin, W., Chen, H., Blinn, K., Liu, M., Liu, P., Bai, J., Tyson, T. A., & Liu, M. (2011) · Nature Communications · doi:10.1038/ncomms1359 · Cited by 334
Rational SOFC material design: new advances and tools
Liu, M., Lynch, M. E., Blinn, K., Alamgir, F. M., & Choi, Y. (2011) · Materials Today · doi:10.1016/s1369-7021(11)70279-6 · Cited by 327
Andersson, M., Yuan, J., & Sunden, B. A. (2009) · Applied Energy · doi:10.1016/j.apenergy.2009.11.013 · Cited by 285
Wang, Y., Li, W., Ma, L., Li, W., & Liu, X. (2020) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2019.07.026 · Cited by 281
H[sub 2]S Poisoning of Solid Oxide Fuel Cells
Sasaki, K., Susuki, K., Iyoshi, A., Uchimura, M., Imamura, N., Kusaba, H., Teraoka, Y., Fuchino, H., Tsujimoto, K., Uchida, Y., et al. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2336075 · Cited by 274
Review of perovskite-structure related cathode materials for solid oxide fuel cells
Kaur, P., & Singh, K. (2020) · Ceramics International · doi:10.1016/j.ceramint.2019.11.066 · Cited by 250
Internal reforming SOFC running on biogas
Shiratori, Y., Ijichi, T., Oshima, T., & Sasaki, K. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.05.064 · Cited by 233
A review of solid oxide fuel cell component fabrication methods toward lowering temperature
Zakaria, Z., Mat, Z. A., Hassan, S. H. A., & Kar, Y. B. (2019) · International Journal of Energy Research · doi:10.1002/er.4907 · Cited by 213
Progress in low-temperature solid oxide fuel cells with hydrocarbon fuels
Su, H., & Hu, Y. H. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126235 · Cited by 203
Recent fabrication techniques for micro-tubular solid oxide fuel cell support: A review
Jamil, S. M., Othman, M. H. D., Rahman, M. A., Jaafar, J., Ismail, A. F., & Li, K. (2014) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2014.08.034 · Cited by 187
Khan, M. S., Xu, X., Knibbe, R., & Zhu, Z. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.110918 · Cited by 180
Tang, Y., & Liu, J. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.07.068 · Cited by 178
Screen-printing inks for the fabrication of solid oxide fuel cell films: A review
Somalu, M. R., Muchtar, A., Daud, W. R. W., & Brandon, N. P. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.11.008 · Cited by 178
Jiang, Y., Chen, F., & Xia, C. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229713 · Cited by 177
Adams, T. A., Nease, J., Tucker, D., & Barton, P. I. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie300996r · Cited by 166
23,000 h steam electrolysis with an electrolyte supported solid oxide cell
Schefold, J., Brisse, A., & Poepke, H. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.01.072 · Cited by 164
Review of composite cathodes for intermediate-temperature solid oxide fuel cell applications
Aziz, A. J. A., Baharuddin, N. A., Somalu, M. R., & Muchtar, A. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.06.176 · Cited by 161
Explosion Limits of Hydrogen/Oxygen Mixtures at Initial Pressures up to 200 bar
Schröder, V., Emonts, B., Janßen, H., & Schulze, H. ‐. (2004) · Chemical Engineering & Technology · doi:10.1002/ceat.200403174 · Cited by 159
Cathode-supported tubular solid oxide fuel cell technology: A critical review
Huang, K., & Singhal, S. C. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.001 · Cited by 144
Cao, J., Su, C., Ji, Y., Yang, G., & Shao, Z. (2020) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.09.010 · Cited by 123
La0.6Sr0.4Fe0.8Cu0.2O3− perovskite oxide as cathode for IT-SOFC
Zhou, Q., Xu, L., Guo, Y., Jia, D., Li, Y., & Wei, W. C. J. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.05.114 · Cited by 122
Prospects of Fuel Cell Combined Heat and Power Systems
Olabi, A. G., Wilberforce, T., Sayed, E. T., Elsaid, K., & Abdelkareem, M. A. (2020) · Energies · doi:10.3390/en13164104 · Cited by 122
Revisiting ionic conductivity of rare earth doped ceria: Dependency on different factors
Anirban, S., & Dutta, A. (2020) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2020.06.119 · Cited by 93
Yu, F., Han, T., Wang, Z., Xie, Y., Wu, Y., Jin, Y. H., Yang, N., Xiao, J., & Kawi, S. (2020) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2020.10.259 · Cited by 91
A more efficient anode microstructure for SOFCs based on proton conductors
Rainwater, B. H., Liu, M., & Liu, M. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.09.027 · Cited by 79
Shimada, H., Yamaguchi, T., Sumi, H., Yamaguchi, Y., Nomura, K., & Fujishiro, Y. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.11.081 · Cited by 67
Commercial vehicle auxiliary loads powered by PEM fuel cell
Matulić, N., Radica, G., Barbir, F., & Nizetic, S. (2019) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2018.12.121 · Cited by 60
Kamalimeera, N., & Kirubakaran, V. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.110914 · Cited by 55
Xia, W., Li, Q., Sun, L., Huo, L., & Zhao, H. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.155406 · Cited by 42
Tubular solid oxide fuel cells fabricated by a novel freeze casting method
Panthi, D., Hedayat, N., Woodson, T., Emley, B. J., & Du, Y. (2019) · Journal of the American Ceramic Society · doi:10.1111/jace.16781 · Cited by 41
Jeong, C., Lee, J., Park, M., Hong, J., Kim, H., Son, J., Lee, J., Kim, B. K., & Yoon, K. J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.08.023 · Cited by 40
Wang, Y., Gao, J.-T., Chen, W., Li, C.-X., Li, C.-X., Zhang, S.-L., Yang, G.-J., Li, C., & Li, C. (2019) · Journal of Thermal Spray Technology · doi:10.1007/s11666-019-00970-1 · Cited by 38
High performance micro-monolithic reversible solid oxide electrochemical reactor
Rabuni, M. F., Vatcharasuwan, N., Li, T., & Li, K. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228026 · Cited by 37
Effect of processing route on the properties of LSCF-based composite cathode for IT-SOFC
Ahuja, A., Gautam, M., Sinha, A., Sharma, J., Patro, P. K., & Venkatasubramanian, A. (2020) · Bulletin of Materials Science · doi:10.1007/s12034-020-2075-y · Cited by 26
A Microtubular Direct Carbon Solid Oxide Fuel Cell Operated on the Biochar Derived from Pepper Straw
Yu, F., Wang, Y., Xie, Y., Zhang, W., Zhang, J., Meng, X., Xiao, J., & Yang, N. (2019) · Energy Technology · doi:10.1002/ente.201901077 · Cited by 25
Kariya, T., Tanaka, H., Hirono, T., Kuse, T., Yanagimoto, K., Uchiyama, K., Henmi, M., Hirose, M., Kimura, I., Suu, K., et al. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.09.109 · Cited by 24
Pang, S., Wang, W., Su, Y., Shen, X., Wang, Y., Xu, K., & Chen, C. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0701707jes · Cited by 24
Panagi, K., Laycock, C. J., Reed, J. P., & Guwy, A. J. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113854 · Cited by 20
Computational modelling of solid oxide fuel cells
Savioli, J., & Watson, G. W. (2020) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2019.12.007 · Cited by 20
Oxygen Reduction Catalysts on Nanoparticle Electrodes
Tsao, K., & Yang, H. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-409547-2.13334-7 · Cited by 15
Fabrication of electrolyte-supported solid oxide fuel cells using a tape casting process
Kwon, Y., & Han, Y. (2020) · Journal of the Ceramic Society of Japan · doi:10.2109/jcersj2.20006 · Cited by 10
Cited by
Perspective of the role of hydrogen in the 21st century energy transition
Capurso, T., Stefanizzi, M., Torresi, M., & Camporeale, S. M. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2021.114898 · Cited by 871
Global hydrogen development - A technological and geopolitical overview
Lebrouhi, B. E., Djoupo, J. J., Lamrani, B., Benabdelaziz, K., & Kousksou, T. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.12.076 · Cited by 551
A comprehensive review of green hydrogen energy systems
Kourougianni, F., Arsalis, A., Olympios, A. V., Yiasoumas, G., Konstantinou, C., Papanastasiou, P., & Georghiou, G. E. (2024) · Renewable Energy · doi:10.1016/j.renene.2024.120911 · Cited by 364
Green ammonia production technologies: A review of practical progress
Ojelade, O. A., Zaman, S. F., & Ni, B.-J. (2023) · Journal of Environmental Management · doi:10.1016/j.jenvman.2023.118348 · Cited by 172
Metadata
- Authors
- Singh, M., Zappa, D., & Comini, E.
- Venue
- International Journal of Hydrogen Energy
- Publisher
- Elsevier BV
- Published
- 2021-08
- Volume
- 46
- Issue
- 54
- Pages
- 27643-27674
- ISSN
- 0360-3199 (ISSN-L)
- OpenAlex
- W3173439054
- Cited by
- 753
- References
- 57
- FWCI
- 29.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.