The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
High-performance integrated additive manufacturing with laser shock peening –induced microstructural evolution and improvement in mechanical properties of Ti6Al4V alloy components
Abstract
Abstract High-performance integrated additive manufacturing with laser shock peening (LSP), is an innovative selective laser melting (SLM) method to improve mechanical properties, and refine microstructure in the surface layer of metallic components. Phase, residual stress distribution, surface micro-hardness, tensile properties and microstructural evolution of SLMed and SLM-LSPed specimens in horizontal and vertical directions were examined. In particular, typical microstructural features in the surface layer were characterized by transmission electron microscopy (TEM) observations. Results indicated that surface micro-hardness subjected to massive LSP treatment had significantly improved, tensile residual stress was transformed into compressive residual stress by LSP-induced plastic deformation, and both SLMed specimens in two directions exhibited a good combination of the ultimate tensile strength (UTS) and ductility. Meanwhile, high-density dislocations and a large number of mechanical twins were generated in the coarse α′ martensites by laser shock wave (LSW), and gradually evolved into refined α′ martensites. Furthermore, according to the included angle between LSW and the deposited plane, two kinds of LSW-induced atomic diffusion processes at the interfaces between both adjacent deposited layers were presented, and the influence mechanisms of the included angle between LSW and the deposited plane on tensile properties of both SLM-LSPed specimens were revealed. The hybrid additive manufacturing technology combined SLM with LSP realizes the high-efficiency and high-quality integrated manufacturing of the formed metallic components for practical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Materials science and engineering: An introduction
Clayton, C. R. (1987) · Materials Science and Engineering · doi:10.1016/0025-5416(87)90343-0 · Cited by 5,925
Materials Science and Engineering: An Introduction
Callister, W. D. (1985) · Cited by 5,351
Additive manufacturing of Ti6Al4V alloy: A review
Liu, S., & Shin, Y. C. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.107552 · Cited by 2,472
The onset of twinning in metals: a constitutive description
Meyers, M. A., Vöhringer, O., & Lubarda, V. A. (2001) · Acta Materialia · doi:10.1016/s1359-6454(01)00300-7 · Cited by 1,695
Vilaro, T., Colin, C., & Bartout, J. D. (2011) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-011-0731-y · Cited by 1,283
Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting
Yang, J., Yu, H., Yin, J., Gao, M. X., Wang, Z., & Zeng, X. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.06.117 · Cited by 913
Manufacture by selective laser melting and mechanical behavior of commercially pure titanium
Attar, H., Calin, M., Zhang, L. C., Scudino, S., & Eckert, J. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.11.038 · Cited by 744
Rapid manufacturing of metal components by laser forming
Santos, E. C., Shiomi, M., Osakada, K., & Laoui, T. (2006) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2005.09.005 · Cited by 740
Wu, A. S., Brown, D. W., Kumar, M., Gallegos, G. F., & King, W. E. (2014) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-014-2549-x · Cited by 657
Shipley, H., McDonnell, D., Culleton, M., Coull, R., Lupoi, R., O’Donnell, G. E., & Trimble, D. (2018) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2018.01.003 · Cited by 643
Cited by
Progress and perspectives in laser additive manufacturing of key aeroengine materials
Tan, C., Weng, F., Sui, S., Chew, Y., & Bi, G. (2021) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2021.103804 · Cited by 520
Review on field assisted metal additive manufacturing
Tan, C., Li, R., Su, J., Du, D., Du, Y., Attard, B., Chew, Y., Zhang, H., Lavernia, E. J., Fautrelle, Y., et al. (2023) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2023.104032 · Cited by 377
Recent progress in gradient-structured metals and alloys
Ji, W., Zhou, R., Vivegananthan, P., See Wu, M., Gao, H., & Zhou, K. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101194 · Cited by 313
Mahmood, M. A., Chioibasu, D., Ur Rehman, A., Mihai, S., & Popescu, A. C. (2022) · Metals · doi:10.3390/met12010077 · Cited by 119
Metadata
- Authors
- Lu, J., Lu, H., Xu, X., Yao, J., Cai, J., & Luo, K.
- Venue
- International Journal of Machine Tools and Manufacture
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 148
- Pages
- 103475
- ISSN
- 0890-6955 (ISSN-L)
- OpenAlex
- W2981171244
- Cited by
- 375
- References
- 20
- FWCI
- 20.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: High-performance integrated additive manufacturing with laser shock peening –induced microstructural evolution and improvement in mechanical properties of Ti6Al4V alloy components. https://app.cochat.ai/papers/10.1016/j.ijmachtools.2019.103475
- The paper
- Lu, J., Lu, H., Xu, X., Yao, J., Cai, J., & Luo, K. (2020). High-performance integrated additive manufacturing with laser shock peening –induced microstructural evolution and improvement in mechanical properties of Ti6Al4V alloy components. International Journal of Machine Tools and Manufacture. https://doi.org/10.1016/j.ijmachtools.2019.103475
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.