The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Reversible energy absorbing meta-sandwiches by FDM 4D printing
Open accessAbstract
The aim of this paper is to introduce dual-material auxetic meta-sandwiches by four-dimensional (4D) printing technology for reversible energy absorption applications. The meta-sandwiches are developed based on an understanding of hyper-elastic feature of soft polymers and elasto-plastic behaviors of shape memory polymers and cold programming derived from theory and experiments. Dual-material lattice-based meta-structures with different combinations of soft and hard components are fabricated by 4D printing fused deposition modelling technology. The feasibility and performance of reversible dual-material meta-structures are assessed experimentally and numerically. Computational models for the meta-structures are developed and verified by the experiments. Research trials show that the dual-material auxetic designs are capable of generating a range of non-linear stiffness as per the requirement of energy absorbing applications. It is found that the meta-structures with hyper-elastic and/or elasto-plastic features dissipate energy and exhibit mechanical hysteresis characterized by non-coincident compressive loading-unloading curves. Mechanical hysteresis can be achieved by leveraging elasto-plasticity and snap-through-like mechanical instability through compression. Experiments also reveal that the mechanically induced plastic deformation and dissipation processes are fully reversible by simply heating. The material-structural model, concepts and results provided in this paper are expected to be instrumental towards 4D printing tunable meta-sandwiches for reversible energy absorption applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Cellular solids: Structure and properties
Wolcott, M. P. (1990) · Materials Science and Engineering: A · doi:10.1016/0921-5093(90)90295-e · Cited by 5,926
Three Decades of Auxetics Research − Materials with Negative Poisson's Ratio: A Review
Saxena, K. K., Das, R. K., & Calius, E. P. (2016) · Advanced Engineering Materials · doi:10.1002/adem.201600053 · Cited by 639
Al-saedi, D. S. J., Masood, S. H., Faizan‐Ur‐Rab, M., Alomarah, A., & Ponnusamy, P. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.059 · Cited by 527
3D‐Printed Mechanical Metamaterials with High Energy Absorption
Yuan, S., Chua, C. K., & Zhou, K. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800419 · Cited by 380
3D printed architected polymeric sandwich panels: Energy absorption and structural performance
Yazdani Sarvestani, H., Akbarzadeh, A. H., Niknam, H., & Hermenean, K. (2018) · Composite Structures · doi:10.1016/j.compstruct.2018.04.002 · Cited by 314
4D printing reconfigurable, deployable and mechanically tunable metamaterials
Yang, C., Boorugu, M., Dopp, A., Ren, J., Martin, R., Han, D., Choi, W., & Lee, H. (2019) · Materials Horizons · doi:10.1039/c9mh00302a · Cited by 284
4D‐Printed Biodegradable and Remotely Controllable Shape Memory Occlusion Devices
Lin, C., Lv, J., Li, Y., Zhang, F., Li, J., Liu, Y., Liu, L., & Leng, J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201906569 · Cited by 272
Additively manufactured porous metallic biomaterials
Zadpoor, A. A. (2019) · Journal of Materials Chemistry B · doi:10.1039/c9tb00420c · Cited by 213
Taheri Andani, M., Saedi, S., Turabi, A. S., Karamooz, M. R., Haberland, C., Karaca, H. E., & Elahinia, M. (2017) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.01.047 · Cited by 205
Thermal conductivity of architected cellular metamaterials
Mirabolghasemi, A., Akbarzadeh, A. H., Rodrigue, D., & Therriault, D. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.04.061 · Cited by 140
Large deformations of soft metamaterials fabricated by 3D printing
Bodaghi, M., Damanpack, A. R., Hu, G., & Liao, W. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.002 · Cited by 124
Self-citationMechanical Models, Structures, and Applications of Shape-Memory Polymers and Their Composites
Xin, X., Liu, L., Liu, Y., & Leng, J. (2019) · Acta Mechanica Solida Sinica · doi:10.1007/s10338-019-00103-9 · Cited by 115
Thermomechanically Triggered Two‐Stage Pattern Switching of 2D Lattices for Adaptive Structures
Yuan, C., Mu, X., Dunn, C. K., Haidar, J., Wang, T., & Qi, H. J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705727 · Cited by 92
Review of mechanisms and deformation behaviors in 4D printing
Ding, H., Zhang, X., Liu, Y., & Ramakrishna, S. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03871-3 · Cited by 90
Three-Dimensionally Printed Mechanical Metamaterials With Thermally Tunable Auxetic Behavior
Zhao, Z., Yuan, C., Lei, M., et al. (2019) · Physical Review Applied · doi:10.1103/physrevapplied.11.044074 · Cited by 65
Influence of strain rates on the mechanical behaviors of shape memory polymer
Guo, X., Liu, L., Zhou, B., Liu, Y., & Leng, J. (2015) · Smart Materials and Structures · doi:10.1088/0964-1726/24/9/095009 · Cited by 38
Cited by
Chen, L.-Y., Liang, S.-X., Liu, Y., & Zhang, L.-C. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100648 · Cited by 603
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
4D printing: Fundamentals, materials, applications and challenges
Ahmed, A., Arya, S., Gupta, V., Furukawa, H., & Khosla, A. (2021) · Polymer · doi:10.1016/j.polymer.2021.123926 · Cited by 350
Khalid, M. Y., Arif, Z. U., Noroozi, R., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.07.035 · Cited by 336
Self-citation4D printing of shape memory polylactic acid (PLA)
Mehrpouya, M., Vahabi, H., Janbaz, S., Darafsheh, A., Mazur, T. R., & Ramakrishna, S. (2021) · Polymer · doi:10.1016/j.polymer.2021.124080 · Cited by 258
Metadata
- Authors
- Bodaghi, M., Serjouei, A., Zolfagharian, A., Fotouhi, M., Rahman, H., & Durand, D.
- Venue
- International Journal of Mechanical Sciences
- Publisher
- Elsevier BV
- Published
- 2020-05
- Volume
- 173
- Pages
- 105451
- ISSN
- 0020-7403 (ISSN-L)
- OpenAlex
- W3000195753
- Cited by
- 268
- References
- 17
- FWCI
- 19.22
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.