The DOI matches its Crossref record.
Custom-made 3D-printed face masks in case of pandemic crisis situations with a lack of commercially available FFP2/3 masks
Open accessAbstract
In the case of pandemic crisis situations, a crucial lack of protective material such as protective face masks for healthcare professionals can occur. A proof of concept (PoC) and prototype are presented, demonstrating a reusable custom-made three-dimensionally (3D) printed face mask based on materials and techniques (3D imaging and 3D printing) with global availability. The individualized 3D protective face mask consists of two 3D-printed reusable polyamide composite components (a face mask and a filter membrane support) and two disposable components (a head fixation band and a filter membrane). Computer-aided design (CAD) was used to produce the reusable components of the 3D face mask based on individual facial scans, which were acquired using a new-generation smartphone with two cameras and a face scanning application. 3D modelling can easily be done by CAD designers worldwide with free download software. The disposable non-woven melt-blown filter membrane is globally available from industrial manufacturers producing FFP2/3 protective masks for painting, construction, agriculture, and the textile industry. Easily available Velcro fasteners were used as a disposable head fixation band. A cleaning and disinfection protocol is proposed. Leakage and virological testing of the reusable components of the 3D face mask, following one or several disinfection cycles, has not yet been performed and is essential prior to its use in real-life situations. This PoC should allow the reader to consider making and/or virologically testing the described custom-made 3D-printed face masks worldwide. The surface tessellation language (STL) format of the original virtual templates of the two reusable components described in this paper can be downloaded free of charge using the hyperlink (Supplementary Material online).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Face Masks in the New COVID-19 Normal: Materials, Testing, and Perspectives
Chua, M. H., Cheng, W., Goh, S. S., Kong, J., Li, B., Lim, J. Y. C., Mao, L., Wang, S., Xue, K., Yang, L., et al. (2020) · Research · doi:10.34133/2020/7286735 · Cited by 495
An overview of filtration efficiency through the masks: Mechanisms of the aerosols penetration
Tcharkhtchi, A., Abbasnezhad, N., Zarbini Seydani, M., Zirak, N., Farzaneh, S., & Shirinbayan, M. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.08.002 · Cited by 395
3D printing technology; methods, biomedical applications, future opportunities and trends
Bozkurt, Y., & Karayel, E. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.050 · Cited by 384
Polymer 3D Printing Review: Materials, Process, and Design Strategies for Medical Applications
Arefin, A. M. E., Khatri, N. R., Kulkarni, N., & Egan, P. F. (2021) · Polymers · doi:10.3390/polym13091499 · Cited by 361
O’Dowd, K., Nair, K. M., Forouzandeh, P., Mathew, S., Grant, J., Moran, R., Bartlett, J., Bird, J., & Pillai, S. C. (2020) · Materials · doi:10.3390/ma13153363 · Cited by 254
Metadata
- Authors
- Swennen, G. R. J., Pottel, L., & Haers, P. E.
- Venue
- International Journal of Oral and Maxillofacial Surgery
- Publisher
- Elsevier BV
- Published
- 2020-05
- Volume
- 49
- Issue
- 5
- Pages
- 673-677
- ISSN
- 0901-5027 (ISSN-L)
- OpenAlex
- W3013582445
- Cited by
- 210
- References
- 0
- FWCI
- 23.52
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Custom-made 3D-printed face masks in case of pandemic crisis situations with a lack of commercially available FFP2/3 masks. https://app.cochat.ai/papers/10.1016/j.ijom.2020.03.015
- The paper
- Swennen, G. R. J., Pottel, L., & Haers, P. E. (2020). Custom-made 3D-printed face masks in case of pandemic crisis situations with a lack of commercially available FFP2/3 masks. International Journal of Oral and Maxillofacial Surgery. https://doi.org/10.1016/j.ijom.2020.03.015
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.