The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review
Abstract
Abstract Additive manufacturing (AM) is emerging as an alternative to conventional subtractive manufacturing methods with the goal to deliver unique and complex net or near-net shaped parts. AM components should operate under various loading conditions, from static to complex dynamic multiaxial loadings, therefor, fatigue performance is often a key consideration. Intrinsic AM defects such as Lack of Fusion (LOF) defects, porosities, and un-melted particles are important for fatigue as a local phenomenon which usually starts at stress concentrations. Defects can be minimized by process optimization and/or post-processing but may not be fully eliminated. Full-scale testing, which is typically very costly and often necessary to assess reliability for fatigue performance of safety critical components, could be reduced by robust analytical fatigue performance prediction techniques. This work reviews the literature on the influential microstructural attributes on fatigue performance of AM parts with a focus on generated defects. This includes AM defect characterization and statistical analysis methods, as well as effect of process parameters and post-processing on defects, and consequently fatigue performance. The review also includes defect-based, microstructure-sensitive, and multiscale models proposed in the literature for modeling the effect of defects on fatigue performance and provides an outlook for additional research needed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Seifi, M., Gorelik, M., Waller, J., Hrabe, N., Shamsaei, N., Daniewicz, S., & Lewandowski, J. J. (2017) · JOM · doi:10.1007/s11837-017-2265-2 · Cited by 422
Pegues, J. W., Shao, S., Shamsaei, N., Sanaei, N., Fatemi, A., Warner, D. H., Li, P., & Phan, N. (2020) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2019.105358 · Cited by 236
Self-citation
Cited by
Metal additive manufacturing in aerospace: A review
Blakey-Milner, B., Gradl, P., Snedden, G., Brooks, M., Pitot, J., Lopez, E., Leary, M., Berto, F., & du Plessis, A. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110008 · Cited by 2,263
Withers, P. J., Bouman, C., Carmignato, S., Cnudde, V., Grimaldi, D., Hagen, C. K., Maire, E., Manley, M., Du Plessis, A., & Stock, S. R. (2021) · Nature Reviews Methods Primers · doi:10.1038/s43586-021-00015-4 · Cited by 1,079
Benedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
An overview of modern metal additive manufacturing technology
Armstrong, M., Mehrabi, H., & Naveed, N. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.10.060 · Cited by 549
Heat treatment for metal additive manufacturing
Laleh, M., Sadeghi, E., Revilla, R. I., Chao, Q., Haghdadi, N., Hughes, A. E., Xu, W., De Graeve, I., Qian, M., Gibson, I., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101051 · Cited by 538
Metadata
- Authors
- Sanaei, N., & Fatemi, A.
- Venue
- Progress in Materials Science
- Publisher
- Elsevier BV
- Published
- 2021-04
- Volume
- 117
- Pages
- 100724
- ISSN
- 0079-6425 (ISSN-L)
- OpenAlex
- W3061569788
- Cited by
- 1,029
- References
- 3
- FWCI
- 48.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review. https://app.cochat.ai/papers/10.1016/j.pmatsci.2020.100724
- The paper
- Sanaei, N., & Fatemi, A. (2021). Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review. Progress in Materials Science. https://doi.org/10.1016/j.pmatsci.2020.100724
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.