The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Mechanical performance and durability of treated palm fiber reinforced mortars
Open accessAbstract
The performance of cement mortar reinforced with varying percentages of treated bundled date palm fibers is investigated to appraise their feasibility for structural and non-structural applications. The study first entailed the evaluation of two different alkali pre-treatments at varying concentrations by subjecting treated and untreated bundled fibers to tensile testing. The suitable pre-treatment was then adopted while casting cement mortar mixes. The physical properties of fresh mortar was studied through setting times and, for mortar mixes cured up to 28 days, through parameters such as drying shrinkage and water absorption. The unconfined compressive strengths, split tensile strengths as well as the flexural strengths of the cured mortar mixes at two different ages were undertaken to assess their mechanical properties; while the durability was gauged based on their sulfate resistance for up to a period of four months. Observed stress–strain behavior under tension led to the choice of 0.173% Ca(OH)2 as the preferred pre-treatment for the bundled fibers used in the mortar mixes. This was further supported by the microstructural examination on the hardened mortars which, revealed that the integrity of treated fibers remained intact within the cement matrix without hindering the hydration processes. Results also indicated that inclusion of fibers improves the flexural strengths as well as the sulfate resistance of the mortar mixes. However, the cylinder and cube compressive strengths decreased with the increase in treated fiber inclusion. Although, the work reported in this paper was carried out on cement mortars, conclusions are expected to be relevant to fiber reinforced concrete employing treated natural fibers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
Cited by
Gholampour, A., & Ozbakkaloglu, T. (2020) · Journal of Materials Science · doi:10.1007/s10853-019-03990-y · Cited by 1,058
Sustainable Fiber‐Reinforced Composites: A Review
Maiti, S., Islam, M. R., Uddin, M. A., Afroj, S., Eichhorn, S. J., & Karim, N. (2022) · Advanced Sustainable Systems · doi:10.1002/adsu.202200258 · Cited by 493
de Brito, J., & Kurda, R. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.123558 · Cited by 436
Effect of fiber treatment on flexural properties of natural fiber reinforced composites: A review
Sood, M., & Dwivedi, G. (2018) · Egyptian Journal of Petroleum · doi:10.1016/j.ejpe.2017.11.005 · Cited by 384
Kareche, A., Agoudjil, B., Haba, B., & Boudenne, A. (2020) · Waste and Biomass Valorization · doi:10.1007/s12649-019-00669-y · Cited by 45
Metadata
- Authors
- Ozerkan, N. G., Ahsan, B., Mansour, S., & Iyengar, S. R.
- Venue
- International Journal of Sustainable Built Environment
- Publisher
- Elsevier BV
- Published
- 2013-12
- Volume
- 2
- Issue
- 2
- Pages
- 131-142
- ISSN
- 2212-6090 (ISSN-L)
- OpenAlex
- W2049240330
- Cited by
- 164
- References
- 1
- FWCI
- 3.63
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mechanical performance and durability of treated palm fiber reinforced mortars. https://app.cochat.ai/papers/10.1016/j.ijsbe.2014.04.002
- The paper
- Ozerkan, N. G., Ahsan, B., Mansour, S., & Iyengar, S. R. (2013). Mechanical performance and durability of treated palm fiber reinforced mortars. International Journal of Sustainable Built Environment. https://doi.org/10.1016/j.ijsbe.2014.04.002
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.