The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Predicting strength of recycled aggregate concrete using Artificial Neural Network, Adaptive Neuro-Fuzzy Inference System and Multiple Linear Regression
Open accessAbstract
Compressive strength of concrete, recognized as one of the most significant mechanical properties of concrete , is identified as one of the most essential factors for the quality assurance of concrete. In the current study, three different data-driven models, i.e., Artificial Neural Network (ANN), Adaptive Neuro-Fuzzy Inference System (ANFIS), and Multiple Linear Regression (MLR) were used to predict the 28 days compressive strength of recycled aggregate concrete (RAC). Recycled aggregate is the current need of the hour owing to its environmental pleasant aspect of re-using the wastes due to construction. 14 different input parameters, including both dimensional and non-dimensional parameters, were used in this study for predicting the 28 days compressive strength of concrete. The present study concluded that estimation of 28 days compressive strength of recycled aggregate concrete was performed better by ANN and ANFIS in comparison to MLR. In other words, comparing the test step of all the three models, it can be concluded that the MLR model is better to be utilized for preliminary mix design of concrete, and ANN and ANFIS models are suggested to be used in the mix design optimization and in the case of higher accuracy necessities. In addition, the performance of data-driven models with and without the non-dimensional parameters is explored. It was observed that the data-driven models show better accuracy when the non-dimensional parameters were used as additional input parameters. Furthermore, the effect of each non-dimensional parameter on the performance of each data-driven model is investigated. Finally, the effect of number of input parameters on 28 days compressive strength of concrete is examined.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
RETRACTED: Prediction compressive strength of lightweight geopolymers by ANFIS
Nazari, A., & Khalaj, G. (2012) · Ceramics International · doi:10.1016/j.ceramint.2012.02.026 · Cited by 35
RetractedANFIS: adaptive-network-based fuzzy inference system
Jang, J.-S. R. (1993) · IEEE Transactions on Systems, Man, and Cybernetics · doi:10.1109/21.256541 · Cited by 16,254
Poon, C. S., Shui, Z. H., Lam, L., Fok, H., & Kou, S. C. (2004) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00186-8 · Cited by 915
Properties of concrete made with recycled aggregate from partially hydrated old concrete
Katz, A. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)01033-5 · Cited by 865
Influence of recycled aggregates on mechanical properties of HS/HPC
Ajdukiewicz, A., & Kliszczewicz, A. (2002) · Cement and Concrete Composites · doi:10.1016/s0958-9465(01)00012-9 · Cited by 678
Influence of field recycled coarse aggregate on properties of concrete
Rao, M. C., Bhattacharyya, S. K., & Barai, S. V. (2010) · Materials and Structures · doi:10.1617/s11527-010-9620-x · Cited by 513
Creep and shrinkage of recycled aggregate concrete
Domingo-Cabo, A., Lázaro, C., López-Gayarre, F., Serrano-López, M. A., Serna, P., & Castaño-Tabares, J. O. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.02.018 · Cited by 467
(2003) · Elsevier eBooks · doi:10.1016/b978-0-7506-5686-3.x5246-x · Cited by 458
Mechanical and elastic behaviour of concretes made of recycled-concrete coarse aggregates
Corinaldesi, V. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.02.031 · Cited by 443
Li, Z. (2011) · Wiley eBooks · doi:10.1002/9780470950067 · Cited by 431
New Mixture Proportioning Method for Concrete Made with Coarse Recycled Concrete Aggregate
Fathifazl, G., Abbas, A., Razaqpur, A. G., Isgor, O. B., Fournier, B., & Foo, S. (2009) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(2009)21:10(601 · Cited by 289
Pereira, P., Evangelista, L., & de Brito, J. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.06.009 · Cited by 273
Deshpande, N., Londhe, S., & Kulkarni, S. (2014) · International Journal of Sustainable Built Environment · doi:10.1016/j.ijsbe.2014.12.002 · Cited by 207
Self-citationPadmini, D., Ilamparuthi, K., & Sudheer, K. P. (2007) · Computers and Geotechnics · doi:10.1016/j.compgeo.2007.03.001 · Cited by 182
An experimental study on the effect of recycled aggregate on concrete properties
Ryu, J. S. (2002) · Magazine of Concrete Research · doi:10.1680/macr.2002.54.1.7 · Cited by 182
A unified framework for stochastic predictions of mechanical properties of polymeric nanocomposites
Vu-Bac, N., Silani, M., Lahmer, T., Zhuang, X., & Rabczuk, T. (2015) · Computational Materials Science · doi:10.1016/j.commatsci.2014.04.066 · Cited by 174
Recycled concrete made with different natural coarse aggregates exposed to high temperature
Zega, C. J., & Di Maio, A. A. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2008.08.017 · Cited by 171
Prediction of Concrete Compressive Strength by Evolutionary Artificial Neural Networks
Nikoo, M., Moghadam, F. T., & Sadowski, Ł. (2015) · Advances in Materials Science and Engineering · doi:10.1155/2015/849126 · Cited by 171
Concrete compressive strength analysis using a combined classification and regression technique
Chou, J., & Tsai, C. (2012) · Automation in Construction · doi:10.1016/j.autcon.2012.02.001 · Cited by 149
Vu‐Bac, N., Lahmer, T., Keitel, H., Zhao, J., Zhuang, X., & Rabczuk, T. (2013) · Mechanics of Materials · doi:10.1016/j.mechmat.2013.07.021 · Cited by 149
Effect of Recycled Sand Content on Characteristics of Mortars and Concretes
Dapena, E., Alaejos, P., Lobet, A., & Perez, D. J. (2010) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0000183 · Cited by 136
Genetic programming for experimental big data mining: A case study on concrete creep formulation
Gandomi, A. H., Sajedi, S., Kiani, B., & Huang, Q. (2016) · Automation in Construction · doi:10.1016/j.autcon.2016.06.010 · Cited by 108
Corrosion current density prediction in reinforced concrete by imperialist competitive algorithm
Sadowski, Ł., & Nikoo, M. (2014) · Neural Computing and Applications · doi:10.1007/s00521-014-1645-6 · Cited by 86
Hawkins, D., Hong, S. M., Raslan, R., Mumovic, D., & Hanna, S. (2012) · International Journal of Sustainable Built Environment · doi:10.1016/j.ijsbe.2012.05.002 · Cited by 81
Relative moisture movement through recycled aggregate concrete
Padmini, A. K., Ramamurthy, K., & Mathews, M. S. (2002) · Magazine of Concrete Research · doi:10.1680/macr.2002.54.5.377 · Cited by 54
Nikoo, M., Zarfam, P., Nikoo, M. R., & Branch, R. (2012) · Cited by 23
Cited by
A Comprehensive Review on Recycled Aggregate and Recycled Aggregate Concrete
Wang, B., Yan, L., Fu, Q., & Kasal, B. (2021) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2021.105565 · Cited by 999
Machine learning prediction of mechanical properties of concrete: Critical review
Ben Chaabene, W., Flah, M., & Nehdi, M. L. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119889 · Cited by 779
Machine learning in medical applications: a review of state-of-the-art methods
Shehab, M., Abualigah, L., Shambour, Q., Abu-Hashem, M. A., Shambour, M. K. Y., Alsalibi, A. I., & Gandomi, A. H. (2022) · Computers in Biology and Medicine · doi:10.1016/j.compbiomed.2022.105458 · Cited by 542
Mohtasham Moein, M., Saradar, A., Rahmati, K., Ghasemzadeh Mousavinejad, S. H., Bristow, J., Aramali, V., & Karakouzian, M. (2023) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.105444 · Cited by 391
Duan, J., Asteris, P. G., Nguyen, H., Bui, X.-N., & Moayedi, H. (2021) · Engineering with Computers · doi:10.1007/s00366-020-01003-0 · Cited by 357
Metadata
- Authors
- Khademi, F., Jamal, S. M., Deshpande, N., & Londhe, S.
- Venue
- International Journal of Sustainable Built Environment
- Publisher
- Elsevier BV
- Published
- 2016-12
- Volume
- 5
- Issue
- 2
- Pages
- 355-369
- ISSN
- 2212-6090 (ISSN-L)
- OpenAlex
- W2523984406
- Cited by
- 321
- References
- 26
- FWCI
- 20.20
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.