Enhanced SO2 adsorption and desorption on chemically and physically activated biochar made from wood residues
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Abstract SO2, one of the most harmful gases, is generated when oxygen in air combines with sulfur species from anthropogenic sources (e.g., the smelting of mineral ores). Thus, the objectives of this study are to assess the potential use of activated biochar for the removal of SO2, and to compare the impact of the activation process on the development of porosity and surface chemistry for SO2 adsorption. Results show that activated biochars develop porosity (with narrow and wide pores) and functional groups connected to their surface, which makes these materials suitable for adsorption of SO2. However, no linear relationship between textural properties and the amount of SO2 adsorbed by activated biochars from dynamic adsorption tests were noticed. In addition, the highest SO2 adsorption capacity was not reached for materials with the highest surface area, or micropore or ultramicropore volume. Specifically, steam-activated biochar had the best performance for the removal of SO2 due to its optimal surface area (590 m2 g−1); volume of ultra- (0.22 cm3 g−1), micro- (0.23 cm3 g−1), and mesopores (0.11 cm3 g−1); its basic character (not from nitrogenated groups); and the low percentage of acid-oxygenated functional groups connected to its surface. After six thermal regeneration cycles, activated biochar exhibited high SO2 removal capacity and high regenerability. Based on these findings, activated biochar made from forest wood residues has promising potential for the removal of gas contaminants.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Preparation of activated carbons for SO2 adsorption by CO2 and steam activation
Zhu, Y., Gao, J., Li, Y., Sun, F., Gao, J., Wu, S., & Qin, Y. (2011) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2011.06.009 · Cited by 105
Cited by
Yaashikaa, P. R., Kumar, P. S., Varjani, S., & Saravanan, A. (2020) · Biotechnology Reports · doi:10.1016/j.btre.2020.e00570 · Cited by 1,132
Wang, L., Ok, Y. S., Tsang, D. C. W., Alessi, D. S., Rinklebe, J., Wang, H., Mašek, O., Hou, R., O'Connor, D., & Hou, D. (2020) · Soil Use and Management · doi:10.1111/sum.12592 · Cited by 393
Insight on water remediation application using magnetic nanomaterials and biosorbents
Abdel Maksoud, M. I. A., Elgarahy, A. M., Farrell, C., Al-Muhtaseb, A. H., Rooney, D. W., & Osman, A. I. (2020) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2019.213096 · Cited by 374
Akhil, D., Lakshmi, D., Kartik, A., Vo, D.-V. N., Arun, J., & Gopinath, K. P. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01167-7 · Cited by 296
A Review of Non-Soil Biochar Applications
Bartoli, M., Giorcelli, M., Jagdale, P., Rovere, M., & Tagliaferro, A. (2020) · Materials · doi:10.3390/ma13020261 · Cited by 156
“[198] for the removal of SO2 that was generated from anthropogenic sources.”
Background
Metadata
- Authors
- Braghiroli, F. L., Bouafif, H., & Koubaa, A.
- Venue
- Industrial Crops and Products
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 138
- Pages
- 111456
- ISSN
- 0926-6690 (ISSN-L)
- OpenAlex
- W2949878710
- Cited by
- 89
- References
- 1
- FWCI
- 5.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.