CoChat
Sign Up
Cited by 134Conducting polymers and applicationsAdvanced Cellulose Research StudiesNanocomposite Films for Food Packaging

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Cellulose/polyaniline hybrid nanocomposites: Design, fabrication, and emerging multidimensional applications

Open access
Rana, Ashvinder K., Scarpa, Fabrizio, Thakur, Vijay Kumar·2022·Industrial Crops and Products
DOI 10.1016/j.indcrop.2022.115356
Open this paper in CoChat — free accountOpen PDF

Abstract

Polyaniline, a special class of intrinsic conducting polymers, has a wide range of potential applications in multiple fields, such as in biosensors, electronics devices and biomedical applications. Polyaniline possesses high electrical conductivity, low toxic contents, hydrophilic character, better environmental stability and nanostructured surface characteristics. Polyaniline has however a current limited set of applications because of its low degradation rate and poor processibility; for this reason, polyaniline has been blended with different nano/micro cellulosic biomaterials (i.e. cellulose nano crystals and nano fibers, bacterial cellulose and macro cellulose). Furthermore, cellulose-reinforced polyaniline matrices have shown significant potential for antibacterial agents, antioxidants, sensors, electromagnetic shielding device, adsorbent in water treatment, fuel cells, electrochromic and in biomedical applications. These biodegradable and environmentally benign conducting polymers have also been used in tissue engineering, biosensors, and drug delivery. In the present review article we have surveyed recent advancements in the synthesis process and progress of polyaniline/cellulose based bio-composites for water treatment, electrical devices, biosensors, biomedical application and other areas. The article aims at providing a comprehensive background on the topic, as well as at proposing innovative strategies among investigators for the use of these biobased polymers in future work. The various factors and conditions that impact the adsorption/deterioration behavior of cellulose/PANI composites during the removal of heavy metals, dyes, and other effluents from waste water have also been discussed. Additionally, a comparative view of various fuel cells, electrochromic devices and the electrical and magnetic properties of different cellulose/polyaniline composites has also been provided.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.indcrop.2022.115356

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

  • Cellulose aerogels were chosen as the structural framework due to their highly porous, three-dimensional network, large surface area, low density, and good mechanical stability.

    “Cellulose aerogels were chosen as the structural framework due to their highly porous, three-dimensional network, large surface area, low density, and good mechanical stability [26].”

    From Dual-function aerogel electrocatalyst enabling efficient hydrogen production and ambient-temperature hydrogen detection (2026) · cites this paper as [26]

    Section 3 describes cellulose as lightweight and having good mechanical properties, while Section 4.1.2 discusses bacterial-cellulose/polyaniline aerogels. Neither passage establishes the claimed combination of a highly porous three-dimensional network, large surface area, low density, and mechanical stability specifically for cellulose aerogels, or says they were chosen as a structural framework for those reasons. Page numbers were not available in our copy. (LLM, conf=0.82)

    Experimental — accuracy not yet measured

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Flagged first, then by citations

Research works printed but not linked: 227

  1. Abbasian, 2012, Synthesis and characterization of a terpolymer derived from styrene, methyl styrene, and polyaniline and its organoclay nanocomposite, J. Appl. Polym. Sci., 125, 10.1002/app.35391 · DOI
  2. Abbasian, 2017, Cellulose/polyaniline derivatives nanocomposites: synthesis and their performance in removal of anionic dyes from simulated industrial effluents, J. Appl. Polym. Sci., 134, 10.1002/app.45352 · DOI
  3. Abdali, 2019, Cellulose nanopaper cross-linked amino graphene/polyaniline sensors to detect CO2 gas at room temperature, Sensors, 19, 5215, 10.3390/s19235215 · DOI
  4. Abdel Rehim, 2020, Rational design of active packaging films based on polyaniline-coated polymethyl methacrylate/nanocellulose composites, Polym. Bull., 77, 2485, 10.1007/s00289-019-02866-0 · DOI
  5. Abdi, 2019, Optimized fabrication of newly cholesterol biosensor based on nanocellulose, Int. J. Biol. Macromol., 126, 1213, 10.1016/j.ijbiomac.2019.01.001 · DOI
  6. Abitbol, 2016, Nanocellulose, a tiny fiber with huge applications, Curr. Opin. Biotechnol., 39, 76, 10.1016/j.copbio.2016.01.002 · DOI
  7. Abou Hammad, 2019, A novel electromagnetic biodegradable nanocomposite based on cellulose, polyaniline, and cobalt ferrite nanoparticles, Carbohydr. Polym., 216, 54, 10.1016/j.carbpol.2019.03.038 · DOI
  8. Abu Hassan Shaari, 2021, Synthesis and conductivity studies of poly (Methyl Methacrylate)(PMMA) by co-polymerization and blending with polyaniline (PANi), Polymers, 13, 1939, 10.3390/polym13121939 · DOI
  9. Anastopoulos, 2014, Agricultural peels for dye adsorption: a review of recent literature, J. Mol. Liq., 200, 381, 10.1016/j.molliq.2014.11.006 · DOI
  10. Anju, 2019, A novel humidity and ammonia sensor based on nanofibers/polyaniline/polyvinyl alcohol, Sens. Actuators A: Phys., 285, 35, 10.1016/j.sna.2018.10.037 · DOI
  11. Anžlovar, 2018, Nanocomposites of LLDPE and surface-modified cellulose nanocrystals prepared by melt processing, Molecules, 23, 1782, 10.3390/molecules23071782 · DOI
  12. Aparicio-Martínez, 2018, Room temperature detection of acetone by a PANI/Cellulose/WO3 electrochemical sensor, J. Nanomater., 2018, 1, 10.1155/2018/6519694 · DOI
  13. de Assis, 2017, Conversion economics of forest biomaterials: risk and financial analysis of CNC manufacturing, Biofuels, Bioprod. Bioref., 11, 682, 10.1002/bbb.1782 · DOI
  14. Ates, 2020, Chemistry, structures, and advanced applications of nanocomposites from biorenewable resources, Chem. Rev., 120, 9304, 10.1021/acs.chemrev.9b00553 · DOI
  15. Ballav, 2015, Efficient removal of reactive black from aqueous solution using polyaniline coated ligno-cellulose composite as a potential adsorbent, J. Mol. Liq., 209, 387, 10.1016/j.molliq.2015.05.051 · DOI
  16. Beluns, 2021, From wood and hemp biomass wastes to sustainable nanocellulose foams, Ind. Crops Prod., 170, 10.1016/j.indcrop.2021.113780 · DOI
  17. Bhadra, 2009, Progress in preparation, processing and applications of polyaniline, Prog. Polym. Sci., 34, 783, 10.1016/j.progpolymsci.2009.04.003 · DOI
  18. Bhaumik, 2014, Composite nanofibers prepared from metallic iron nanoparticles and polyaniline: high performance for water treatment applications, J. Colloid Interface Sci., 425, 75, 10.1016/j.jcis.2014.03.031 · DOI
  19. Blaker, 2014, Aligned unidirectional PLA/bacterial cellulose nanocomposite fibre reinforced PDLLA composites, React. Funct. Polym., 85, 185, 10.1016/j.reactfunctpolym.2014.09.006 · DOI
  20. Borsoi, 2016, Effect of cellulose nanowhiskers functionalization with polyaniline for epoxy coatings, Appl. Surf. Sci., 364, 124, 10.1016/j.apsusc.2015.12.140 · DOI
  21. Briede, 2022, Acrylation of biomass: a review of synthesis process: know-how and future application directions, Curr. Opin. Green. Sustain. Chem., 35
  22. Carlmark, 2012, Grafting of cellulose by ring-opening polymerisation – a review, Eur. Polym. J., 48, 1646, 10.1016/j.eurpolymj.2012.06.013 · DOI
  23. Chen, 2016, Recent approaches and future prospects of bacterial cellulose-based electroconductive materials, J. Mater. Sci., 51, 5573, 10.1007/s10853-016-9899-2 · DOI
  24. Cheng, 2021, Bifunctional regenerated cellulose/polyaniline/nanosilver fibers as a catalyst/bactericide for water decontamination, ACS Appl. Mater. Interfaces, 13, 4410, 10.1021/acsami.0c20188 · DOI · Paper page
  25. Choi, 2017, Cellulose-based smart fluids under applied electric fields, Materials, 10, 1060, 10.3390/ma10091060 · DOI
  26. Correia, 2017, The influence of bleached jute fiber filler on the properties of vulcanized natural rubber, Mater. Res., 20, 466, 10.1590/1980-5373-mr-2017-0126 · DOI
  27. Cummins, 2000, Ultrafast electrochromic windows based on redox-chromophore modified nanostructured semiconducting and conducting films, J. Phys. Chem. B, 104, 11449, 10.1021/jp001763b · DOI
  28. da S. Oliveira, 2018, Production of self-supported conductive films based on cellulose, polyaniline and silver nanoparticles, Carbohydr. Polym., 199, 84, 10.1016/j.carbpol.2018.06.049 · DOI
  29. Das, 2012, Review on conducting polymers and their applications, Polym. -Plast. Technol. Eng., 51, 1487, 10.1080/03602559.2012.710697 · DOI
  30. Dayan, 2001, Mechanisms of chromium toxicity, carcinogenicity and allergenicity: review of the literature from 1985 to 2000, Hum. Exp. Toxicol., 20, 439, 10.1191/096032701682693062 · DOI
  31. Debnath, 2015, Development of a polyaniline-lignocellulose composite for optimal adsorption of Congo red, Int. J. Biol. Macromol., 75, 199, 10.1016/j.ijbiomac.2015.01.011 · DOI
  32. Debnath, 2015, Single stage batch adsorber design for efficient Eosin yellow removal by polyaniline coated ligno-cellulose, Int. J. Biol. Macromol., 72, 732, 10.1016/j.ijbiomac.2014.09.018 · DOI
  33. Delgado Aguilar, 2015, Approaching a low-cost production of cellulose nanofibers for papermaking applications, Bioresources, 10, 10.15376/biores.10.3.5345-5355 · DOI
  34. Dong, 2014, Sensitive detection of Pb(ii) at gold nanoparticle/polyaniline/graphene modified electrode using differential pulse anodic stripping voltammetry, Anal. Methods, 6, 9367, 10.1039/C4AY01908C · DOI
  35. Dubey, 2021, Surfactant assisted synthesis of pH responsive polyaniline-cellulose biocomposite for sensor applications, Polym. -Plast. Technol. Mater., 60, 1135
  36. Dufresne, 2020, Preparation and properties of cellulose nanomaterials, Pap. Biomater., 5, 1
  37. Durán, 2016, Silver nanoparticles: a new view on mechanistic aspects on antimicrobial activity, Nanomed. Nanotechnol. Biol. Med., 12, 789, 10.1016/j.nano.2015.11.016 · DOI
  38. Dzulkurnain, 2021, A review on impedimetric and voltammetric analysis based on polypyrrole conducting polymers for electrochemical sensing applications, Polymers, 13, 2728, 10.3390/polym13162728 · DOI
  39. Ehsan, 2011, Conductive and biodegradable polyaniline/starch blends and their composites with polystyrene, Iran. Polym. J., 20, 319
  40. El-Bery, 2021, Efficient non-metal based conducting polymers for photocatalytic hydrogen production: comparative study between polyaniline, polypyrrole and PEDOT, RSC Adv., 11, 13229, 10.1039/D1RA01218E · DOI
  41. El-Sayed, 2018, Synthesis and characterization of polyaniline/tosylcellulose stearate composites as promising semiconducting materials, Synth. Met., 236, 44, 10.1016/j.synthmet.2018.01.001 · DOI
  42. Foyle, 2021, Polyacetylene revisited: a computational study of the molecular engineering of N-type polyacetylene, J. Phys. Chem. Lett., 12, 7745, 10.1021/acs.jpclett.1c01925 · DOI
  43. Freitas, 2018, Different morphologies of polyaniline nanostructures synthesized by interfacial polymerization, Mater. Lett., 224, 42, 10.1016/j.matlet.2018.04.062 · DOI
  44. Fu, 2015, Fabrication of polyaniline/carboxymethyl cellulose/cellulose nanofibrous mats and their biosensing application, Appl. Surf. Sci., 349, 35, 10.1016/j.apsusc.2015.04.215 · DOI
  45. Gapusan, 2020, Adsorption of anionic methyl orange dye and lead(II) heavy metal ion by polyaniline-kapok fiber nanocomposite, Mater. Chem. Phys., 243, 10.1016/j.matchemphys.2020.122682 · DOI
  46. Gholami, 2017, Investigation of physical and mechanical properties of polyaniline/MMT nanocomposites, Curr. Chem. Lett., 6, 151, 10.5267/j.ccl.2017.6.004 · DOI
  47. Ghorbani, 2011, Application of polyaniline nanocomposite coated on rice husk ash for removal of Hg(II) from aqueous media, Synth. Met., 161, 1430, 10.1016/j.synthmet.2011.05.016 · DOI
  48. Ghorbani, 2012, Removal of zinc ions from aqueous solution using polyaniline nanocomposite coated on rice husk, Iran. J. Energy Environ., 3, 83
  49. Gong, 2020, A facile preparation of polyaniline/cellulose hydrogels for all-in-one flexible supercapacitor with remarkable enhanced performance, Carbohydr. Polym., 245, 10.1016/j.carbpol.2020.116611 · DOI
  50. Gopakumar, 2018, Cellulose nanofiber-based polyaniline flexible papers as sustainable microwave absorbers in the X-band, ACS Appl. Mater. Interfaces, 10, 20032, 10.1021/acsami.8b04549 · DOI
  51. Gospodinova, 1998, Conducting polymers prepared by oxidative polymerization: polyaniline, Prog. Polym. Sci., 23, 1443, 10.1016/S0079-6700(98)00008-2 · DOI
  52. Gu, 2012, Magnetic polyaniline nanocomposites toward toxic hexavalent chromium removal, RSC Adv., 2, 11007, 10.1039/c2ra21991c · DOI
  53. Gupta, 2016, Cellulose: a review as natural, modified and activated carbon adsorbent, Bioresour. Technol., 216, 1066, 10.1016/j.biortech.2016.05.106 · DOI
  54. Habibi, 2014, Key advances in the chemical modification of nanocelluloses, Chem. Soc. Rev., 43, 1519, 10.1039/C3CS60204D · DOI
  55. Hasanin, 2021, Electrical properties of conducting tertiary composite based on biopolymers and polyaniline, J. Bio- Tribo-Corros., 7, 1, 10.1007/s40735-021-00573-w · DOI
  56. Hasija, 2020, Fabrication of Ag/AgI/WO3 heterojunction anchored P and S co-doped graphitic carbon nitride as a dual Z scheme photocatalyst for efficient dye degradation, Solid State Sci., 100, 10.1016/j.solidstatesciences.2019.106095 · DOI
  57. Herrera, 2018, Removal of methyl orange dye and copper (II) ions from aqueous solution using polyaniline-coated kapok (Ceiba pentandra) fibers, Water Sci. Technol., 78, 1137, 10.2166/wst.2018.385 · DOI
  58. Hosseini, 2021, Bacterial cellulose/polyaniline nanocomposite aerogels as novel bioadsorbents for removal of hexavalent chromium: experimental and simulation study, J. Clean. Prod., 278, 10.1016/j.jclepro.2020.123817 · DOI
  59. Hosseini, 2020, Lightweight aerogels based on bacterial cellulose/silver nanoparticles/polyaniline with tuning morphology of polyaniline and application in soft tissue engineering, Int. J. Biol. Macromol., 152, 57, 10.1016/j.ijbiomac.2020.02.095 · DOI
  60. Hu, 2011, Flexible electrically conductive nanocomposite membrane based on bacterial cellulose and polyaniline, J. Phys. Chem. B, 115, 8453, 10.1021/jp204422v · DOI
  61. Huang, 2021, Preparation of polyaniline/cellulose nanocrystal composite and its application in surface coating of cellulosic paper, Prog. Org. Coat., 159
  62. Itoi, 2017, Electrochemical synthesis of polyaniline in the micropores of activated carbon for high-performance electrochemical capacitors, Chem. Commun., 53, 3201, 10.1039/C6CC08822H · DOI
  63. Jahan, 2018, Removal of hexavalent chromium from potable drinking using a polyaniline-coated bacterial cellulose mat, Environ. Sci.: Water Res. Technol., 4, 1589
  64. Janaki, 2013, Synthesis, characterization and application of cellulose/polyaniline nanocomposite for the treatment of simulated textile effluent, Cellulose, 20, 1153, 10.1007/s10570-013-9910-x · DOI
  65. Jasim, 2017, Synthesis and characterization of bacterial cellulose/PAni composite for antibacterial and biomedical application, Synthesis, 54
  66. Jasim, 2017, Fabrication of bacterial cellulose/polyaniline/single-walled carbon nanotubes membrane for potential application as biosensor, Carbohydr. Polym., 163, 62, 10.1016/j.carbpol.2017.01.056 · DOI
  67. Jaymand, 2013, Recent progress in chemical modification of polyaniline, Prog. Polym. Sci., 38, 1287, 10.1016/j.progpolymsci.2013.05.015 · DOI
  68. Jiang, 2012, Polyaniline nanofibers assembled on alginate microsphere for Cu2+ and Pb2+ uptake, J. Hazard. Mater., 215–216, 17, 10.1016/j.jhazmat.2012.02.026 · DOI
  69. Jiang, 2018, Polyaniline-based adsorbents for removal of hexavalent chromium from aqueous solution: a mini review, Environ. Sci. Pollut. Res., 25, 6158, 10.1007/s11356-017-1188-3 · DOI
  70. Kaitsuka, 2016, Synthesis of polyaniline (PANI) in nano-reaction field of cellulose nanofiber (CNF), and carbonization, Polymers, 8, 40, 10.3390/polym8020040 · DOI
  71. Kakde, 2017, Synthesis and characterization of polyaniline doped with HCl H, Indian J. Sci. Technol., 10, 20, 10.17485/ijst/2017/v10i20/112920 · DOI
  72. Kateb, 2016, ZnO–PEDOT core–shell nanowires: an ultrafast, high contrast and transparent electrochromic display, Sol. Energy Mater. Sol. Cells, 145, 200, 10.1016/j.solmat.2015.10.014 · DOI
  73. Kaur, 2015, Electrically conductive polymers and composites for biomedical applications, RSC Adv., 5, 37553, 10.1039/C5RA01851J · DOI
  74. Kaur, 2015, Development and characterization of guar gum nanoparticles for oral immunization against tuberculosis, Drug Deliv., 22, 328, 10.3109/10717544.2014.894594 · DOI
  75. Ke, 2019, Highly conductive cellulose network/polyaniline composites prepared by wood fractionation and in situ polymerization of aniline, Macromol. Mater. Eng., 304, 1900112, 10.1002/mame.201900112 · DOI
  76. Khadir, 2020, Low-cost sisal fibers/polypyrrole/polyaniline biosorbent for sequestration of reactive orange 5 from aqueous solutions, J. Environ. Chem. Eng., 8, 10.1016/j.jece.2020.103956 · DOI
  77. Khalid, 2013, Electrical conductivity studies of polyaniline nanotubes doped with different sulfonic acids, Indian J. Mater. Sci., 2013
  78. Khandelwal, 2018, Electrically conductive green composites based on epoxidized linseed oil and polyaniline: an insight into electrical, thermal and mechanical properties, Compos. Part B: Eng., 136, 149, 10.1016/j.compositesb.2017.10.030 · DOI
  79. Kherroub, 2021, Development of novel conductive copolymer based on furan with improved solubility and thermal properties, J. Mol. Struct., 1225, 10.1016/j.molstruc.2020.129174 · DOI
  80. Kim, 2015, Large-scale nanoelectrode arrays to monitor the dopaminergic differentiation of human neural stem cells, Adv. Mater., 27, 6356, 10.1002/adma.201502489 · DOI
  81. Kim, 2019, Self-assembly of bio-cellulose nanofibrils through intermediate phase in a cell-free enzyme system, Biochem. Eng. J., 142, 135, 10.1016/j.bej.2018.11.017 · DOI
  82. Klemm, 2005, Cellulose: fascinating biopolymer and sustainable raw material, Angew. Chem. Int. Ed., 44, 3358, 10.1002/anie.200460587 · DOI · Paper page
  83. Kotresh, 2016, Humidity sensing performance of spin coated polyaniline–carboxymethyl cellulose composite at room temperature, Cellulose, 23, 3177, 10.1007/s10570-016-1035-6 · DOI
  84. Krishna, 2000, Thermodynamics of chromium(VI) anionic species sorption onto surfactant-modified montmorillonite clay, J. Colloid Interface Sci., 229, 230, 10.1006/jcis.2000.7015 · DOI
  85. Kumar, 2008, Removal and recovery of chromium from wastewater using short chain polyaniline synthesized on jute fiber, Chem. Eng. J., 141, 130, 10.1016/j.cej.2007.11.004 · DOI
  86. Kumar, 2022, Potential of magnetic nano cellulose in biomedical applications: Recent Advances, Biomaterials and Polymers Horizon, 1, 32, 10.37819/bph.001.01.0133 · DOI
  87. Lavoine, 2012, Microfibrillated cellulose – its barrier properties and applications in cellulosic materials: a review, Carbohydr. Polym., 90, 735, 10.1016/j.carbpol.2012.05.026 · DOI
  88. Le Hoang, 2018, Preparation and physical characteristics of epoxy resin/ bacterial cellulose biocomposites, Polym. Bull., 75, 2607, 10.1007/s00289-017-2162-4 · DOI
  89. Lee, 2012, Fabrication and evaluation of bacterial cellulose-polyaniline composites by interfacial polymerization, Cellulose, 19, 1251, 10.1007/s10570-012-9705-5 · DOI
  90. Li, 2014, Removal of aqueous Hg(II) and Cr(VI) using phytic acid doped polyaniline/cellulose acetate composite membrane, J. Hazard. Mater., 280, 20, 10.1016/j.jhazmat.2014.07.052 · DOI
  91. Li, 2015, Conducting polymers, 23, 10.1007/978-3-319-16862-3_2 · DOI
  92. Lin, 2013, New bacterial cellulose/polyaniline nanocomposite film with one conductive side through constrained interfacial polymerization, Ind. Eng. Chem. Res., 52, 2869, 10.1021/ie303297b · DOI
  93. Liu, 2014, Synthesis and characterisation of nanocellulose-based polyaniline conducting films, Compos. Sci. Technol., 99, 31, 10.1016/j.compscitech.2014.05.001 · DOI
  94. Liu, 2018, A facile template approach to preparing stable NFC/Ag/polyaniline nanocomposites for imparting multifunctionality to paper, Carbohydr. Polym., 194, 97, 10.1016/j.carbpol.2018.04.015 · DOI
  95. Logan, 2015, Assessment of microbial fuel cell configurations and power densities, Environ. Sci. Technol. Lett., 2, 206, 10.1021/acs.estlett.5b00180 · DOI
  96. Lyu, 2018, Highly crystalline polyaniline nanofibers coating with low-cost biomass for easy separation and high efficient removal of anionic dye ARG from aqueous solution, Appl. Surf. Sci., 458, 413, 10.1016/j.apsusc.2018.07.074 · DOI
  97. Lyu, 2021, Fabrication of 3D compressible polyaniline/cellulose nanofiber aerogel for highly efficient removal of organic pollutants and its environmental-friendly regeneration by peroxydisulfate process, Chem. Eng. J., 414, 10.1016/j.cej.2021.128931 · DOI
  98. Ma, 2017, Porous lignin based poly (acrylic acid)/organo-montmorillonite nanocomposites: swelling behaviors and rapid removal of Pb (II) ions, Polymer, 128, 12, 10.1016/j.polymer.2017.09.009 · DOI
  99. Mahato, 2020, Recent progress in conducting polymers for hydrogen storage and fuel cell applications, Polymers, 12, 2480, 10.3390/polym12112480 · DOI
  100. Maity, 2018, Polyaniline anchored MWCNTs on fabric for high performance wearable ammonia sensor, ACS Sens., 3, 1822, 10.1021/acssensors.8b00589 · DOI
  101. Manan, 2022, Bacterial cellulose: molecular regulation of biosynthesis, supramolecular assembly, and tailored structural and functional properties, Prog. Mater. Sci., 129, 10.1016/j.pmatsci.2022.100972 · DOI
  102. Mani, 2015, A highly selective and wide range ammonia sensor — nanostructured ZnO:Co thin film, Mater. Sci. Eng.: B, 191, 41, 10.1016/j.mseb.2014.10.007 · DOI
  103. Mansour, 2011, Removal of Cd (II) ion from waste water by adsorption onto polyaniline coated on sawdust, Desalination, 272, 301, 10.1016/j.desal.2011.01.037 · DOI
  104. Marins, 2014, Self-supported bacterial cellulose polyaniline conducting membrane as electromagnetic interference shielding material: effect of the oxidizing agent, Cellulose, 21, 1409, 10.1007/s10570-014-0191-9 · DOI
  105. Mashkour, 2016, Bacterial cellulose-polyaniline nano-biocomposite: a porous media hydrogel bioanode enhancing the performance of microbial fuel cell, J. Power Sources, 325, 322, 10.1016/j.jpowsour.2016.06.063 · DOI
  106. Miretzky, 2010, Cr(VI) and Cr(III) removal from aqueous solution by raw and modified lignocellulosic materials: a review, J. Hazard. Mater., 180, 1, 10.1016/j.jhazmat.2010.04.060 · DOI
  107. Moghadam, 2012, Preparation of conductive nanocomposites based on poly (aniline-co- butyl 3-aminobenzoate) and poly (aniline-co-ethyl 3-aminobenzoate) by solution blending method, Compos. Interfaces, 19, 475, 10.1080/15685543.2012.760263 · DOI
  108. Mohan, 2006, Trivalent chromium removal from wastewater using low cost activated carbon derived from agricultural waste material and activated carbon fabric cloth, J. Hazard. Mater., 135, 280, 10.1016/j.jhazmat.2005.11.075 · DOI
  109. Moon, 2011, Cellulose nanomaterials review: structure, properties and nanocomposites, Chem. Soc. Rev., 40, 3941, 10.1039/c0cs00108b · DOI · Paper page
  110. MuDan, 2018, Photocatalytic activity of CdS@ polyaniline/cellulose fibers composite, Chem. Ind. For. Prod., 38, 115
  111. Najafi Moghadam, 2010, Synthesis of conductive nanocomposites based on polyaniline/poly(styrene-alt-maleic anhydride)/polystyrene, e-Polym., 10
  112. Nepomuceno, 2021, Evaluation of conductivity of nanostructured polyaniline/cellulose nanocrystals (PANI/CNC) obtained via in situ polymerization, J. Solid State Chem., 302, 10.1016/j.jssc.2021.122372 · DOI
  113. Nezakati, 2018, Conductive polymers: opportunities and challenges in biomedical applications, Chem. Rev., 118, 6766, 10.1021/acs.chemrev.6b00275 · DOI
  114. Nicho, 2004, Synthesis of derivatives of polythiophene and their application in an electrochromic device, Sol. Energy Mater. Sol. Cells, 82, 105, 10.1016/j.solmat.2004.01.009 · DOI
  115. Norouzian, 2014, Novel conductive PANI/hydrophilic thiacalix [4] arene nanocomposites: synthesis, characterization and investigation of properties, Chin. J. Polym. Sci., 32, 218, 10.1007/s10118-014-1402-4 · DOI
  116. O’sullivan, 1997, Cellulose: the structure slowly unravels, Cellulose, 4, 173, 10.1023/A:1018431705579 · DOI
  117. Oberhaus, 2021, Fast, simple, and gentle method for removal of polythiophene and other conductive polymer films from gold electrodes, J. Electroanal. Chem., 895, 10.1016/j.jelechem.2021.115466 · DOI
  118. Olad, 2021, Ion-crosslinked carboxymethyl cellulose/polyaniline bio-conducting interpenetrated polymer network: preparation, characterization and application for an efficient removal of Cr(VI) from aqueous solution, Iran. Polym. J., 30, 105, 10.1007/s13726-020-00877-7 · DOI
  119. Omura, 2019, Organic thin paper of cellulose nanofiber/polyaniline doped with (±)-10-camphorsulfonic acid nanohybrid and its application to electromagnetic shielding, ACS Omega, 4, 9446, 10.1021/acsomega.9b00708 · DOI
  120. Owlad, 2009, Removal of hexavalent chromium-contaminated water and wastewater: a review, Water Air Soil Pollut., 200, 59, 10.1007/s11270-008-9893-7 · DOI · Paper page
  121. Palza, 2019, Electroactive smart polymers for biomedical applications, Materials, 12, 277, 10.3390/ma12020277 · DOI
  122. Pang, 2016, A room temperature ammonia gas sensor based on cellulose/TiO 2 /PANI composite nanofibers, Colloids Surf. A: Physicochem. Eng. Asp., 494, 248, 10.1016/j.colsurfa.2016.01.024 · DOI
  123. Pappu, 2019, Manufacturing and characterization of sustainable hybrid composites using sisal and hemp fibres as reinforcement of poly (lactic acid) via injection moulding, Ind. Crops Prod., 137, 260, 10.1016/j.indcrop.2019.05.040 · DOI
  124. Park, 2016, Flexible conductive nanocellulose combined with silicon nanoparticles and polyaniline, Carbohydr. Polym., 140, 43, 10.1016/j.carbpol.2015.12.046 · DOI
  125. Patra, 2015, Removal of anionic dyes from water by potash alum doped polyaniline: investigation of kinetics and thermodynamic parameters of adsorption, J. Phys. Chem. B, 119, 8154, 10.1021/acs.jpcb.5b00535 · DOI
  126. Peng, 2015, A novel fabrication of nitrogen-containing carbon nanospheres with high rate capability as electrode materials for supercapacitors, RSC Adv., 5, 12034, 10.1039/C4RA11889H · DOI
  127. Petersen, 2011, Bacterial cellulose-based materials and medical devices: current state and perspectives, Appl. Microbiol Biotechnol., 91, 1277, 10.1007/s00253-011-3432-y · DOI
  128. Phanthong, 2018, Nanocellulose: extraction and application, Carbon Resour. Convers., 1, 32
  129. Pierini, 2017, Electrospun polyaniline-based composite nanofibers: tuning the electrical conductivity by tailoring the structure of thiol-protected metal nanoparticles, J. Nanomater., 2017, 10.1155/2017/6142140 · DOI
  130. Platnieks, 2021, Adding value to poly (butylene succinate) and nanofibrillated cellulose-based sustainable nanocomposites by applying masterbatch process, Ind. Crops Prod., 169, 10.1016/j.indcrop.2021.113669 · DOI
  131. Poddar, 2021, Recent development in bacterial cellulose production and synthesis of cellulose based conductive polymer nanocomposites, Nano Sel., 2, 1605, 10.1002/nano.202100044 · DOI
  132. Pradhan, 2020, Physical, chemical, and toxicological characterization of fibrillated forms of cellulose using an in vitro gastrointestinal digestion and co-culture model, Toxicol. Res., 9, 290, 10.1093/toxres/tfaa026 · DOI
  133. Prajapati, 2019, Progress in the development of intrinsically conducting polymer composites as biosensors, Macromol. Chem. Phys., 220, 10.1002/macp.201800561 · DOI
  134. Qiu, 2014, Polyaniline coating on carbon fiber fabrics for improved hexavalent chromium removal, RSC Adv., 4, 10.1039/C4RA01700E · DOI
  135. Qiu, 2014, Polyaniline coated ethyl cellulose with improved hexavalent chromium removal, ACS Sustain. Chem. Eng., 2, 2070, 10.1021/sc5003209 · DOI
  136. Qiu, 2015, Polyaniline coating with various substrates for hexavalent chromium removal, Appl. Surf. Sci., 334, 7, 10.1016/j.apsusc.2014.07.039 · DOI
  137. Raizada, 2020, Fabrication of dual Z-scheme photocatalyst via coupling of BiOBr/Ag/AgCl heterojunction with P and S co-doped g-C3N4 for efficient phenol degradation, Arab. J. Chem., 13, 4538, 10.1016/j.arabjc.2019.10.001 · DOI
  138. Rana, 2021, Water desalination using nanocelluloses/cellulose derivatives based membranes for sustainable future, Desalination, 520, 10.1016/j.desal.2021.115359 · DOI
  139. Rana, 2021, Sustainable materials in the removal of pesticides from contaminated water: perspective on macro to nanoscale cellulose, Sci. Total Environ., 797, 10.1016/j.scitotenv.2021.149129 · DOI
  140. Rana, 2021, Cellulosic Grewia optiva fibres: towards chemistry, surface engineering and sustainable materials, J. Environ. Chem. Eng., 10.1016/j.jece.2021.106059 · DOI
  141. Rana, 2021, Towards the use of acrylic acid graft-copolymerized plant biofiber in sustainable fortified composites: manufacturing and characterization, e-Polym., 21, 881, 10.1515/epoly-2021-0080 · DOI
  142. Rana, 2021, Cellulose nanocrystals: pretreatments, preparation strategies, and surface functionalization, Int. J. Biol. Macromol., 182, 1554, 10.1016/j.ijbiomac.2021.05.119 · DOI
  143. Rana, 2022, Electrochemical determination of hydrazine by using MoS2 nanostructure modified gold electrode, Nanofabrication, 7, 10.37819/nanofab.007.190 · DOI
  144. Ravikiran, 2014, Liquid petroleum gas sensing performance of polyaniline-carboxymethyl cellulose composite at room temperature, Curr. Appl. Phys., 14, 960, 10.1016/j.cap.2014.04.015 · DOI
  145. Razalli, 2017, Polyaniline-modified nanocellulose prepared from Semantan bamboo by chemical polymerization: preparation and characterization, RSC Adv., 7, 25191, 10.1039/C7RA03379F · DOI
  146. Rebelo, 2019, Poly(4-vinylaniline)/polyaniline bilayer functionalized bacterial cellulose membranes as bioelectronics interfaces, Carbohydr. Polym., 204, 190, 10.1016/j.carbpol.2018.10.017 · DOI
  147. Rebelo, 2019, Poly(4-vinylaniline)/polyaniline bilayer-functionalized bacterial cellulose for flexible electrochemical biosensors, Langmuir, 35, 10354, 10.1021/acs.langmuir.9b01425 · DOI
  148. Samadi, 2021, Polyaniline-based adsorbents for aqueous pollutants removal: a review, Chem. Eng. J., 418, 10.1016/j.cej.2021.129425 · DOI
  149. Santoro, 2017, Microbial fuel cells: from fundamentals to applications. A review, J. Power Sources, 356, 225, 10.1016/j.jpowsour.2017.03.109 · DOI
  150. Sapurina, 2008, The mechanism of the oxidative polymerization of aniline and the formation of supramolecular polyaniline structures, Polym. Int., 57, 1295, 10.1002/pi.2476 · DOI
  151. Shaghaleh, 2018, Current progress in production of biopolymeric materials based on cellulose, cellulose nanofibers, and cellulose derivatives, RSC Adv., 8, 825, 10.1039/C7RA11157F · DOI
  152. Shahadat, 2017, A critical review on the prospect of polyaniline-grafted biodegradable nanocomposite, Adv. Colloid Interface Sci., 249, 2, 10.1016/j.cis.2017.08.006 · DOI
  153. Shalini, 2016, One pot synthesis, characterization of polyaniline and cellulose/polyaniline nanocomposites: application towards in vitro measurements of antibacterial activity, Mater. Today.: Proc., 3, 1633
  154. Sharma, 2021, Titania modified gum tragacanth based hydrogel nanocomposite for water remediation, J. Environ. Chem. Eng., 9, 10.1016/j.jece.2020.104608 · DOI
  155. Sheng, 2014, Electrospun cellulose nanocrystals/polycaprolactone nanocomposite fiber mats, J. Macromol. Sci. Part B, 53, 820, 10.1080/00222348.2013.861311 · DOI
  156. Shim, 2019, Effect of additives on the in situ laccase-catalyzed polymerization of aniline onto bacterial cellulose, Front. Bioeng. Biotechnol., 7, 264, 10.3389/fbioe.2019.00264 · DOI
  157. Sim, 2015, Facile synthesis of polyaniline nanotubes and their enhanced stimuli-response under electric fields, RSC Adv., 5, 11905, 10.1039/C4RA13635G · DOI
  158. Singha, 2008, Saccaharum cilliare fiber reinforced polymer composites, E-J. Chem., 5, 782
  159. Singha, 2009, Fabrication and characterization of H. sabdariffa fiber-reinforced green polymer composites, Polym. -Plast. Technol. Eng., 48, 482, 10.1080/03602550902725498 · DOI
  160. Singha, 2009, Mechanical, thermal and morphological properties of grewia optiva fiber/polymer matrix composites, Polym. -Plast. Technol. Eng., 48, 201, 10.1080/03602550802634550 · DOI
  161. Singha, 2009, Fabrication and characterization of S. cilliare fibre reinforced polymer composites, Bull. Mater. Sci., 32, 49, 10.1007/s12034-009-0008-x · DOI
  162. Singha, 2008, X-ray diffraction, morphological, and thermal studies on methylmethacrylate graft copolymerized saccharum ciliare fiber, Int. J. Polym. Anal. Charact., 13, 447, 10.1080/10236660802399747 · DOI
  163. Singha, 2008, Fabrication of Hibiscus sabdariffa fibre reinforced polymer composites, Iran. Polym. J., 17, 541
  164. Singha, 2009, Morphological, thermal, and physicochemical characterization of surface modified pinus fibers, Int. J. Polym. Anal. Charact., 14, 271, 10.1080/10236660802666160 · DOI
  165. Song, 2020, Constructing stimuli-free self-healing, robust and ultrasensitive biocompatible hydrogel sensors with conductive cellulose nanocrystals, Chem. Eng. J., 398, 10.1016/j.cej.2020.125547 · DOI
  166. Song, 2015, Properties of NiO x and its influence upon all-thin-film ITO/NiO x /LiTaO 3 /WO 3 /ITO electrochromic devices prepared by magnetron sputtering, Vacuum, 111, 48, 10.1016/j.vacuum.2014.09.007 · DOI
  167. Stanislawska, 2016, Bacterial nanocellulose as a microbiological derived nanomaterial, Adv. Mater. Sci., 16, 45, 10.1515/adms-2016-0022 · DOI
  168. Sudhaik, 2022, Graphitic carbon nitride-based upconversion photocatalyst for hydrogen production and water purification, Nanofabrication, 7, 10.37819/nanofab.007.189 · DOI
  169. Tabrizi, 2017, High-performance room temperature gas sensor based on gold(III) pincer complex with high sensitivity for NH3, Sens. Actuators B: Chem., 245, 815, 10.1016/j.snb.2017.01.193 · DOI
  170. Tan, 2021, Facile fabrication of polyaniline/pristine graphene–bacterial cellulose composites as high-performance electrodes for constructing flexible all-solid-state supercapacitors, ACS Omega, 6, 11427, 10.1021/acsomega.1c00442 · DOI
  171. Thakur, 2018, Recent progress in sodium alginate based sustainable hydrogels for environmental applications, J. Clean. Prod., 198, 143, 10.1016/j.jclepro.2018.06.259 · DOI
  172. Thakur, 2022, Cellulosic biomass-based sustainable hydrogels for wastewater remediation: chemistry and prospective, Fuel, 309, 10.1016/j.fuel.2021.122114 · DOI
  173. Thakur, 2015, Recent advances in green hydrogels from lignin: a review, Int. J. Biol. Macromol., 72, 834, 10.1016/j.ijbiomac.2014.09.044 · DOI
  174. Thakur, 2016, Recent advances in cellulose and chitosan based membranes for water purification: a concise review, Carbohydr. Polym., 146, 148, 10.1016/j.carbpol.2016.03.030 · DOI
  175. Thakur, 2013, Fabrication and physico-chemical properties of high-performance pine needles/green polymer composites, Int. J. Polym. Mater. Polym. Biomater., 62, 226, 10.1080/00914037.2011.641694 · DOI
  176. Tian, 2017, Electrodeposition of Ag nanoparticles on conductive polyaniline/cellulose aerogels with increased synergistic effect for energy storage, Carbohydr. Polym., 156, 19, 10.1016/j.carbpol.2016.09.005 · DOI
  177. Tian, 2014, Recent progress in the preparation of polyaniline nanostructures and their applications in anticorrosive coatings, RSC Adv., 4, 10.1039/c4ra03146f · DOI
  178. Tissera, 2018, Heterogeneous in situ polymerization of polyaniline (PANI) nanofibers on cotton textiles: improved electrical conductivity, electrical switching, and tuning properties, Carbohydr. Polym., 186, 35, 10.1016/j.carbpol.2018.01.027 · DOI
  179. Tong, 2016, Annealing synthesis of coralline V2O5 nanorod architecture for multicolor energy-efficient electrochromic device, Sol. Energy Mater. Sol. Cells, 146, 135, 10.1016/j.solmat.2015.11.008 · DOI
  180. Trindade, 2020, Carbon fiber embedded bacterial cellulose/polyaniline nanocomposite with tailored for microbial fuel cells electrode, J. Appl. Polym. Sci., 137, 10.1002/app.49036 · DOI
  181. Truong, 2021, In situ fabrication of electrically conducting bacterial cellulose-polyaniline-titanium-dioxide composites with the immobilization of Shewanella xiamenensis and its application as bioanode in microbial fuel cell, Fuel, 285, 10.1016/j.fuel.2020.119259 · DOI
  182. Ucar, 2017, An overview of electron acceptors in microbial fuel cells, Front. Microbiol., 8, 10.3389/fmicb.2017.00643 · DOI
  183. Ul-Islam, 2020, Production of bacterial cellulose from alternative cheap and waste resources: a step for cost reduction with positive environmental aspects, Korean J. Chem. Eng., 37, 925, 10.1007/s11814-020-0524-3 · DOI
  184. Ullah, 2015, Innovative production of bio-cellulose using a cell-free system derived from a single cell line, Carbohydr. Polym., 132, 286, 10.1016/j.carbpol.2015.06.037 · DOI
  185. Ullah, 2016, Structural and physico-mechanical characterization of bio-cellulose produced by a cell-free system, Carbohydr. Polym., 136, 908, 10.1016/j.carbpol.2015.10.010 · DOI
  186. Ummami, 2021, Synthesis and characterization of bacterial cellulose-polyaniline composite with variation of dopant concentration, B. SAINSTEK, 9, 69, 10.19184/bst.v9i2.18120 · DOI
  187. Uppal, 2022, Cellulosic fibres-based epoxy composites: from bioresources to a circular economy, Ind. Crops Prod., 182, 10.1016/j.indcrop.2022.114895 · DOI
  188. Usmani, 2020, Bioprocessing of waste biomass for sustainable product development and minimizing environmental impact, Bioresour. Technol.
  189. Vaghela, 2016, Biopolymer-polyaniline composite for a wide range ammonia gas sensor, IEEE Sens. J., 16, 4318, 10.1109/JSEN.2016.2541178 · DOI
  190. Verma, 2020, Graphite modified sodium alginate hydrogel composite for efficient removal of malachite green dye, Int. J. Biol. Macromol., 148, 1130, 10.1016/j.ijbiomac.2020.01.142 · DOI
  191. Visakh, P.M., 2018. Polyaniline: Structure and Properties Relationship in Polyaniline Blends, Composites and Nanocomposites. · DOI
  192. Volova, 2018, Production and properties of bacterial cellulose by the strain Komagataeibacter xylinus B-12068, Appl. Microbiol. Biotechnol., 102, 7417, 10.1007/s00253-018-9198-8 · DOI
  193. Wan, 2018, Simultaneously depositing polyaniline onto bacterial cellulose nanofibers and graphene nanosheets toward electrically conductive nanocomposites, Curr. Appl. Phys., 18, 933, 10.1016/j.cap.2018.05.008 · DOI
  194. Wang, 2013, Polyacrylonitrile/polyaniline core/shell nanofiber mat for removal of hexavalent chromium from aqueous solution: mechanism and applications, RSC Adv., 3, 8978, 10.1039/c3ra40616d · DOI
  195. Wang, 2019, Bacterial cellulose production, properties and applications with different culture methods – a review, Carbohydr. Polym., 219, 63, 10.1016/j.carbpol.2019.05.008 · DOI
  196. Wang, 2016, Cellulose nanofiber-assisted dispersion of cellulose nanocrystals@polyaniline in water and its conductive films, RSC Adv., 6, 10168, 10.1039/C5RA19346J · DOI
  197. Wang, 2020, Preparation and characterization of polylactic acid/polyaniline/nanocrystalline cellulose nanocomposite films, Int. J. Biol. Macromol., 146, 1069, 10.1016/j.ijbiomac.2019.09.233 · DOI
  198. Wang, 2018, In situ polymerized poly(acrylic acid)/alumina nanocomposites for Pb 2+ adsorption, Adv. Polym. Technol., 37, 2981, 10.1002/adv.21969 · DOI
  199. Xu, 2016, Micro-nanostructured polyaniline assembled in cellulose matrix via interfacial polymerization for applications in nerve regeneration, ACS Appl. Mater. Interfaces, 8, 17090, 10.1021/acsami.6b03555 · DOI
  200. Yang, 2021, Wearable and flexible bacterial cellulose/polyaniline ammonia sensor based on a synergistic doping strategy, Sens. Actuators B: Chem., 334, 10.1016/j.snb.2021.129647 · DOI

200 of 227 shown

Cited by

Sorted by citations

Metadata

Authors
Rana, A. K., Scarpa, F., & Thakur, V. K.
Affiliations
  • Sri Sai University (IN)
  • University of Bristol (GB)
  • Scotland's Rural College (GB)
Corresponding author
Thakur, Vijay Kumar
ORCID
Venue
Industrial Crops and Products
Publisher
Elsevier BV
Published
2022-11
Volume
187
Pages
115356
ISSN
0926-6690 (ISSN-L)
DOI
10.1016/j.indcrop.2022.115356
OpenAlex
W4285890887
Cited by
134
References
1
Citations by year
2026: 17 · 2025: 33 · 2024: 29 · 2023: 43 · 2022: 12
FWCI
9.39
Type
journal article
Language
en
Open access
Licence
Locations
Industrial Crops and Products (publishedVersion, cc-by)
Topics
  • Physical Sciences › Materials Science › Polymers and Plastics › Conducting polymers and applications
  • Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
  • Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
Keywords
polyaniline, cellulose, hybrid nanocomposites, conducting polymers, cellulose nanocrystals, bacterial cellulose, water treatment, heavy metal removal, dye adsorption, biosensors, fuel cells, electrochromic devices, electromagnetic interference shielding, antibacterial materials, antioxidant activity, tissue engineering, drug delivery, biodegradable polymers

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review