The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Toward a Safer Battery Management System: A Critical Review on Diagnosis and Prognosis of Battery Short Circuit
Open accessAbstract
Lithium-ion batteries are commonly used as sources of power for electric vehicles (EVs). Battery safety is a major concern, due to a large number of accidents, for which short circuit has been considered as one of the main causes. Therefore, diagnosing and prognosticating short circuit are of great significance to improve EV safety. This work reviews the current state of the art about the diagnosis and prognosis of short circuit, covering the method and the key indicators. The findings provide important insights regarding how to improve the battery safety.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hu, X., Xu, L., Lin, X., & Pecht, M. (2020) · Joule · doi:10.1016/j.joule.2019.11.018 · Cited by 1,320
Data-driven health estimation and lifetime prediction of lithium-ion batteries: A review
Li, Y., Liu, K., Foley, A. M., Zülke, A., Berecibar, M., Nanini-Maury, E., Van Mierlo, J., & Hoster, H. E. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109254 · Cited by 1,193
A review of hazards associated with primary lithium and lithium-ion batteries
Lisbona, D., & Snee, T. (2011) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2011.06.022 · Cited by 701 · cited 1×
“, 2012a), leading to fire and even explosions (Lisbona and Snee, 2011; Meng and Li, 2019).”
BackgroundInternal short circuit detection for battery pack using equivalent parameter and consistency method
Ouyang, M., Zhang, M., Feng, X., Lu, L., Li, J., He, X., & Zheng, Y. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.06.087 · Cited by 309
Self-citationTracking degradation in lithium iron phosphate batteries using differential thermal voltammetry
Shibagaki, T., Merla, Y., & Offer, G. J. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.11.011 · Cited by 74
Research works printed but not linked: 89
- Abaza, 2018, Experimental study of internal and external short circuits of commercial automotive pouch lithium-ion cells, J. Energy Storage, 16, 211, 10.1016/j.est.2018.01.015 · DOI · Paper page
- Amiri, 2016, Investigation of the mechanical behaviour of lithium-ion batteries by an indentation technique, Int. J. Mech. Sci., 105, 1, 10.1016/j.ijmecsci.2015.10.019 · doi:10.1016/j.ijmecsci.2015.10.019
- Bai, 2010, Application of extended Mohr-Coulomb criterion to ductile fracture, Int. J. Fract., 161, 1, 10.1007/s10704-009-9422-8 · doi:10.1007/s10704-009-9422-8
- Belov, 2008, Investigation of the kinetic mechanism in overcharge process for Li-ion battery, Solid State Ionics, 179, 1816, 10.1016/j.ssi.2008.04.031 · DOI
- Cai, 2011, Experimental simulation of internal short circuit in Li-ion and Li-ion-polymer cells, J. Power Sources, 196, 7779, 10.1016/j.jpowsour.2011.04.024 · DOI
- Chen, 2016, Model-based fault diagnosis approach on external short circuit of lithium-ion battery used in electric vehicles, Appl. Energy, 184, 365, 10.1016/j.apenergy.2016.10.026 · DOI · Paper page
- Chen, 2018, Temperature rise prediction of lithium-ion battery suffering external short circuit for all-climate electric vehicles application, Appl. Energy, 213, 375, 10.1016/j.apenergy.2018.01.068 · DOI · Paper page
- Chen, 2019, Performance and safety protection of internal short circuit in lithium-ion battery based on a multilayer electro-thermal coupling model, Appl. Therm. Eng., 146, 775, 10.1016/j.applthermaleng.2018.10.011 · doi:10.1016/j.applthermaleng.2018.10.011
- Chen, 2019, Research status and analysis for battery safety accidents in electric vehicles, J. Mech. Eng., 55, 93
- Chung, 2018, Failure in lithium-ion batteries under transverse indentation loading, J. Power Sources, 389, 148, 10.1016/j.jpowsour.2018.04.003 · doi:10.1016/j.jpowsour.2018.04.003
- Conte, 2009, Safety in the battery design: the short circuit, World Electr. Veh. J., 3, 719, 10.3390/wevj3040719 · DOI
- Deng, 2018, Safety modelling and testing of lithium-ion batteries in electrified vehicles, Nat. Energy, 3, 261, 10.1038/s41560-018-0122-3 · DOI · Paper page
- Deng, 2018, From the charge conditions and internal short-circuit strategy to analyze and improve the overcharge safety of LiCoO2/graphite batteries, Electrochim. Acta, 282, 295, 10.1016/j.electacta.2018.06.081 · DOI
- Fang, 2014, Study of internal short in a Li-ion cell-II. Numerical investigation using a 3D electrochemical-thermal model, J. Power Sources, 248, 1090, 10.1016/j.jpowsour.2013.10.004 · DOI · Paper page
- Feng, 2016, Online internal short circuit detection for a large format lithium ion battery, Appl. Energy, 161, 168, 10.1016/j.apenergy.2015.10.019 · DOI · Paper page
- Feng, 2018, Thermal runaway mechanism of lithium ion battery for electric vehicles: a review, Energy Storage Mater., 10, 246, 10.1016/j.ensm.2017.05.013 · DOI · Paper page
- Feng, 2018, Detecting the internal short circuit in large-format lithium-ion battery using model-based fault-diagnosis algorithm, J. Energy Storage, 18, 26, 10.1016/j.est.2018.04.020 · DOI · Paper page
- Feng, 2018, Analysis on the fault features for internal short circuit detection using an electrochemical-thermal coupled model, J. Electrochem. Soc., 165, A155, 10.1149/2.0501802jes · DOI
- Finegan, 2017, Characterising thermal runaway within lithium-ion cells by inducing and monitoring internal short circuits, Energy Environ. Sci., 10, 1377, 10.1039/C7EE00385D · DOI · Paper page
- Giannakopoulos, 1999, Determination of elastoplastic properties by instrumented sharp indentation, Scr. Mater., 40, 1191, 10.1016/S1359-6462(99)00011-1 · doi:10.1016/s1359-6462(99)00011-1
- Go, 2019, Pyrenetetrone derivatives tailored by nitrogen dopants for high-potential cathodes in lithium-ion batteries, iScience, 21, 206, 10.1016/j.isci.2019.10.023 · doi:10.1016/j.isci.2019.10.023
- Greve, 2012, Mechanical testing and macro-mechanical finite element simulation of the deformation, fracture, and short circuit initiation of cylindrical Lithium ion battery cells, J. Power Sources, 214, 377, 10.1016/j.jpowsour.2012.04.055 · DOI · Paper page
- Guo, 2016, Mechanism of the entire overdischarge process and overdischarge-induced internal short circuit in lithium-ion batteries, Sci. Rep., 6, 1
- Hao, 2018, The indentation analysis triggering internal short circuit of lithium-ion pouch battery based on shape function theory, Int. J. Energy Res., 42, 3696, 10.1002/er.4109 · doi:10.1002/er.4109
- Jones, 2010, Critical review of commercial secondary lithium-ion battery safety standards
- Kisters, 2017, Dynamic impact tests on lithium-ion cells, Int. J. Impact Eng., 108, 205, 10.1016/j.ijimpeng.2017.04.025 · DOI
- Kriston, 2017, External short circuit performance of Graphite-LiNi1/3Co1/3Mn1/3O2 and Graphite-LiNi0.8Co0.15Al0.05O2 cells at different external resistances, J. Power Sources, 361, 170, 10.1016/j.jpowsour.2017.06.056 · DOI
- Kuhn, 2004, Modeling diffusive phenomena using non integer derivatives, Eur. Phys. J. Appl. Phys., 25, 183, 10.1051/epjap:2004009 · doi:10.1051/epjap:2004009
- Lamb, 2014, Evaluation of mechanical abuse techniques in lithium ion batteries, J. Power Sources, 247, 189, 10.1016/j.jpowsour.2013.08.066 · DOI · Paper page
- Lee, 2018, Failure analysis of short-circuited lithium-ion battery with nickel-manganese-cobalt/graphite electrode, J. Nanosci. Nanotechnol., 18, 6427, 10.1166/jnn.2018.15691 · doi:10.1166/jnn.2018.15691
- Liang, 2017, A novel 3D-layered electrochemical-thermal coupled model strategy for the nail-penetration process simulation, J. Power Sources, 342, 836, 10.1016/j.jpowsour.2017.01.005 · doi:10.1016/j.jpowsour.2017.01.005
- Liu, 2016, Integrated computation model of lithium-ion battery subject to nail penetration, Appl. Energy, 183, 278, 10.1016/j.apenergy.2016.08.101 · DOI · Paper page
- Liu, 2018, Critical issues of energy efficient and new energy vehicles development in China, Energy Policy, 115, 92, 10.1016/j.enpol.2018.01.006 · DOI · Paper page
- Liu, 2018, Mechanical integrity of 18650 lithium-ion battery module: packing density and packing mode, Eng. Fail. Anal., 91, 315, 10.1016/j.engfailanal.2018.04.041 · DOI
- Liu, 2018, Recent progress on mechanism and detection of internal short circuit in lithium-ion batteries, Energy Storage Sci. Technol., 7, 55
- Liu, 2018, Thermal runaway of lithium-ion batteries without internal short circuit, Joule, 2, 2047, 10.1016/j.joule.2018.06.015 · DOI · Paper page
- Luo, 2017, Mechanical damage in a lithium-ion pouch cell under indentation loads, J. Power Sources, 357, 61, 10.1016/j.jpowsour.2017.04.101 · DOI
- Maleki, 2009, Internal short circuit in Li-ion cells, J. Power Sources, 191, 568, 10.1016/j.jpowsour.2009.02.070 · DOI · Paper page
- Mao, 2018, Failure mechanism of the lithium ion battery during nail penetration, Int. J. Heat Mass Transf., 122, 1103, 10.1016/j.ijheatmasstransfer.2018.02.036 · DOI
- Meng, 2019, A review on prognostics and health management (PHM) methods of lithium-ion batteries, Renew. Sustain. Energy Rev., 116, 109405, 10.1016/j.rser.2019.109405 · DOI · Paper page
- Millsaps, 2012, IEC 62133: the standard for secondary cells and batteries containing alkaline or other non-acid electrolytes is in its final review cycle, Battery Power, 16, 16
- Mo, 2018, Yolk-Shell Germanium@Polypyrrole architecture with precision expansion void control for lithium ion batteries, iScience, 9, 521, 10.1016/j.isci.2018.11.013 · doi:10.1016/j.isci.2018.11.013
- Naguib, 2018, Limiting internal short-circuit damage by electrode partition for impact-tolerant li-ion batteries, Joule, 2, 155, 10.1016/j.joule.2017.11.003 · DOI
- Noh, 2013, Comparison of the structural and electrochemical properties of layered Li [NixCoyMnz] O2 (x= 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries, J. Power Sources, 233, 121, 10.1016/j.jpowsour.2013.01.063 · DOI · Paper page
- Orendorff, 2011, Experimental triggers for internal short circuits in lithium-ion cells, J. Power Sources, 196, 6554, 10.1016/j.jpowsour.2011.03.035 · DOI
- Ouyang, 2015, Overcharge-induced capacity fading analysis for large format lithium-ion batteries with LiyNi1/3Co1/3Mn1/3O2+ LiyMn2O4 composite cathode, J. Power Sources, 279, 626, 10.1016/j.jpowsour.2015.01.051 · DOI · Paper page
- Ouyang, 2019, A review on the thermal hazards of the lithium-ion battery and the corresponding countermeasures, Appl. Sci., 9, 2483, 10.3390/app9122483 · DOI · Paper page
- Ramadass, 2014, Study of internal short in a Li-ion cell I. Test method development using infra-red imaging technique, J. Power Sources, 248, 769, 10.1016/j.jpowsour.2013.09.145 · DOI
- Ren, 2014, Thermal runaway risk evaluation of Li-ion cells using a pinch-torsion test, J. Power Sources, 249, 156, 10.1016/j.jpowsour.2013.10.058 · doi:10.1016/j.jpowsour.2013.10.058
- Ren, 2017, An electrochemical-thermal coupled overcharge-to-thermal-runaway model for lithium ion battery, J. Power Sources, 364, 328, 10.1016/j.jpowsour.2017.08.035 · DOI · Paper page
- Rheinfeld, 2018, Quasi-isothermal external short circuit tests applied to lithium-ion cells: Part I. Measurements, J. Electrochem. Soc., 165, A3427, 10.1149/2.0451814jes · DOI
- Ruiz, 2018, A review of international abuse testing standards and regulations for lithium ion batteries in electric and hybrid electric vehicles, Renew. Sustain. Energy Rev., 81, 1427, 10.1016/j.rser.2017.05.195 · DOI · Paper page
- Sahraei, 2012, Modeling and short circuit detection of 18650 Li-ion cells under mechanical abuse conditions, J. Power Sources, 220, 360, 10.1016/j.jpowsour.2012.07.057 · DOI
- Sahraei, 2012, Calibration and finite element simulation of pouch lithium-ion batteries for mechanical integrity, J. Power Sources, 201, 307, 10.1016/j.jpowsour.2011.10.094 · DOI
- Sahraei, 2014, Characterizing and modeling mechanical properties and onset of short circuit for three types of lithium-ion pouch cells, J. Power Sources, 247, 503, 10.1016/j.jpowsour.2013.08.056 · DOI · Paper page
- Sahraei, 2015, Modelling of cracks developed in lithium-ion cells under mechanical loading, RSC Adv., 5, 80369, 10.1039/C5RA17865G · DOI
- Sahraei, 2016, Microscale failure mechanisms leading to internal short circuit in Li-ion batteries under complex loading scenarios, J. Power Sources, 319, 56, 10.1016/j.jpowsour.2016.04.005 · DOI · Paper page
- Santhanagopalan, 2009, Analysis of internal short-circuit in a lithium ion cell, J. Power Sources, 194, 550, 10.1016/j.jpowsour.2009.05.002 · DOI · Paper page
- Seo, 2018, Detection method for soft internal short circuit in lithium-ion battery pack by extracting open circuit voltage of faulted cell, Energies, 11, 1669, 10.3390/en11071669 · DOI
- Seo, 2017, Detection of internal short circuit in lithium ion battery using model-based switching model method, Energies, 10, 76, 10.3390/en10010076 · DOI
- Victor, 2013, Parameter and differentiation order estimation in fractional models, Automatica, 49, 926, 10.1016/j.automatica.2013.01.026 · DOI · Paper page
- Vijayaraghavan, 2018, Fracture mechanics modelling of lithium-ion batteries under pinch torsion test, Meas. J. Int. Meas. Confed., 114, 382, 10.1016/j.measurement.2017.10.008 · DOI
- Wang, 2015, Fractional-order modeling and parameter identification for lithium-ion batteries, J. Power Sources, 293, 151, 10.1016/j.jpowsour.2015.05.059 · DOI · Paper page
- Wang, 2018, Prussian blue analogs for rechargeable batteries, iScience, 3, 110, 10.1016/j.isci.2018.04.008 · DOI · Paper page
- Xia, 2014, Failure analysis of pinch-torsion tests as a thermal runaway risk evaluation method of Li-ion cells, J. Power Sources, 265, 356, 10.1016/j.jpowsour.2014.04.040 · DOI
- Wu, 2013, Simulation of internal short circuits in lithium ion cells, IEEE Transp. Electrif. Conf. Expo., 1
- Xia, 2014, External short circuit fault diagnosis for lithium-ion batteries, IEEE Transp. Electrif. Conf. Expo., 1
- Xia, 2017, A correlation based fault detection method for short circuits in battery packs, J. Power Sources, 337, 1, 10.1016/j.jpowsour.2016.11.007 · DOI · Paper page
- Xiong, 2018, Towards a smarter battery management system: a critical review on battery state of health monitoring methods, J. Power Sources, 405, 18, 10.1016/j.jpowsour.2018.10.019 · DOI · Paper page
- Xiong, 2019, Online fault diagnosis of external short circuit for lithium-ion battery pack, IEEE Trans. Ind. Electron., 67, 1081, 10.1109/TIE.2019.2899565 · DOI · Paper page
- Yang, 2017, A novel method on estimating the degradation and state of charge of lithium-ion batteries used for electrical vehicles, Appl. Energy, 207, 336, 10.1016/j.apenergy.2017.05.183 · DOI
- Yang, 2018, A fractional-order model-based battery external short circuit fault diagnosis approach for all-climate electric vehicles application, J. Clean. Prod., 187, 950, 10.1016/j.jclepro.2018.03.259 · DOI · Paper page
- Xiong, 2019, A sensor fault diagnosis method for a lithium-ion battery pack in electric vehicles, IEEE Trans. Power Electron., 34, 9709, 10.1109/TPEL.2019.2893622 · DOI · Paper page
- Yang, 2019, Investigation of internal short circuits of lithium-ion batteries under mechanical abusive conditions, Energies, 12, 1885, 10.3390/en12101885 · doi:10.3390/en12101885
- Zavalis, 2012, Investigation of short-circuit scenarios in a lithium-ion battery cell, J. Electrochem. Soc., 159, A848, 10.1149/2.096206jes · DOI · Paper page
- Zhang, 2015, Characterization of plasticity and fracture of shell casing of lithium-ion cylindrical battery, J. Power Sources, 280, 47, 10.1016/j.jpowsour.2015.01.077 · DOI
- Zhang, 2015, A representative-sandwich model for simultaneously coupled mechanical-electrical-thermal simulation of a lithium-ion cell under quasi-static indentation tests, J. Power Sources, 298, 309, 10.1016/j.jpowsour.2015.08.049 · DOI
- Zhang, 2015, Coupled mechanical-electrical-thermal modeling for short-circuit prediction in a lithium-ion cell under mechanical abuse, J. Power Sources, 290, 102, 10.1016/j.jpowsour.2015.04.162 · DOI · Paper page
- Zhang, 2016, Effect of short-time external short circuiting on the capacity fading mechanism during long-term cycling of LiCoO2/mesocarbon microbeads battery, J. Power Sources, 318, 154, 10.1016/j.jpowsour.2016.03.087 · DOI
- Zhang, 2017, Internal short circuit trigger method for lithium-ion battery based on shape memory alloy, J. Electrochem. Soc., 164, A3038, 10.1149/2.0731713jes · DOI
- Zhang, 2017, Constitutive behavior and progressive mechanical failure of electrodes in lithium-ion batteries, J. Power Sources, 357, 126, 10.1016/j.jpowsour.2017.04.103 · DOI · Paper page
- Zhang, 2018, An overview on thermal safety issues of lithium-ion batteries for electric vehicle application, IEEE Access, 6, 23848, 10.1109/ACCESS.2018.2824838 · DOI · Paper page
- Zhao, 2015, Modeling internal shorting process in large-format li-Ion cells, J. Electrochem. Soc., 162, A1352, 10.1149/2.1031507jes · DOI
- Zhao, 2017, A comprehensive study on Li-ion battery nail penetrations and the possible solutions, Energy, 123, 392, 10.1016/j.energy.2017.02.017 · DOI
- Zhao, 2017, Fault and defect diagnosis of battery for electric vehicles based on big data analysis methods, Appl. Energy, 207, 354, 10.1016/j.apenergy.2017.05.139 · DOI · Paper page
- Zhu, 2016, Deformation and failure mechanisms of 18650 battery cells under axial compression, J. Power Sources, 336, 332, 10.1016/j.jpowsour.2016.10.064 · DOI · Paper page
- Zhu, 2018, A review of safety-focused mechanical modeling of commercial lithium-ion batteries, J. Power Sources, 378, 153, 10.1016/j.jpowsour.2017.12.034 · DOI · Paper page
- Zhu, 2018, Overcharge investigation of large format lithium-ion pouch cells with Li(Ni 0.6 Co 0.2 Mn 0.2 )O 2 cathode for electric vehicles: degradation and failure mechanisms, J. Electrochem. Soc., 165, A3613, 10.1149/2.0161816jes · DOI
- Zhu, 2019, Mechanism of strengthening of battery resistance under dynamic loading, Int. J. Impact Eng., 131, 78, 10.1016/j.ijimpeng.2019.05.003 · doi:10.1016/j.ijimpeng.2019.05.003
Cited by
Xiong, R., Pan, Y., Shen, W., Li, H., & Sun, F. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110048 · Cited by 725
Self-citationThermally modulated lithium iron phosphate batteries for mass-market electric vehicles
Yang, X.-G., Liu, T., & Wang, C.-Y. (2021) · Nature Energy · doi:10.1038/s41560-020-00757-7 · Cited by 579
Xiong, R., Sun, W., Yu, Q., & Sun, F. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115855 · Cited by 481
Self-citationReview of Battery Management Systems (BMS) Development and Industrial Standards
Gabbar, H., Othman, A., & Abdussami, M. (2021) · Technologies · doi:10.3390/technologies9020028 · Cited by 480
Hossain Lipu, M. S., Hannan, M. A., Karim, T. F., Hussain, A., Saad, M. H. M., Ayob, A., Miah, M. S., & Indra Mahlia, T. M. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126044 · Cited by 446
Metadata
- Authors
- Xiong, R., Ma, S., Li, H., Sun, F., & Li, J.
- Venue
- iScience
- Publisher
- Elsevier BV
- Published
- 2020-04
- Volume
- 23
- Issue
- 4
- Pages
- 101010
- ISSN
- 2589-0042 (ISSN-L)
- OpenAlex
- W3013364489
- Cited by
- 218
- References
- 5
- FWCI
- 11.29
- Type
- journal article
- Language
- en
- Open access
- gold
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- creativecommons.org/licenses/by-nc-nd/4.0/ (vor)
- Funders
- National Natural Science Foundation of China
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Toward a Safer Battery Management System: A Critical Review on Diagnosis and Prognosis of Battery Short Circuit. https://app.cochat.ai/papers/10.1016/j.isci.2020.101010
- The paper
- Xiong, R., Ma, S., Li, H., Sun, F., & Li, J. (2020). Toward a Safer Battery Management System: A Critical Review on Diagnosis and Prognosis of Battery Short Circuit. iScience. https://doi.org/10.1016/j.isci.2020.101010
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.