The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
In-depth comparison of the physicochemical characteristics of bio-char derived from biomass pseudo components: Hemicellulose, cellulose, and lignin
Abstract
Abstract Bio-char is a porous, recalcitrant, and highly aromatic carbon-rich material which can be widely used in energy, agriculture, environment, and material industry. In this study, a systematic comparison of the physicochemical characteristics of bio-char derived from three pseudo components of biomass (cellulose char (CC), hemicellulose char (HC), lignin char (LC)) was carried out at different pyrolysis temperatures (250, 350, 450, 550, 650, 750, and 850 °C). The results indicated wide variation in the physicochemical properties and quality of bio-char depending on different pyrolysis temperatures and biomass feedstock composition. Mass and energy yields of CC, HC, and LC decreased with the increase in the pyrolysis temperature, however, LC exhibited higher mass and energy yield than CC and HC because of its better thermal stability. With the increase in the pyrolysis temperature, the carbon content in CC, HC, and LC increased, while the contents of hydrogen and oxygen decreased, because the oxygen and hydrogen containing groups were easily fallen off at higher pyrolysis temperature based on the FTIR analysis. XRD analysis showed that the crystalline structure (Iα-triclinic and Iβ-monoclinic) of cellulose in CC and HC disappeared with the increase in the pyrolysis temperature above 350 °C. However, the graphite structure (002) and (101) in CC, HC, and LC increased. 13C NMR analysis indicated that the carbon structure of alkyl-C, O-alkyl-C, and carboxylic-C gradually decreased in CC, HC and LC as the pyrolysis temperature increased, while the aryl-C increased, indicating the formation of a more polyaromatic graphite-like structure at higher pyrolysis temperature. SEM results revealed that the volume of CC and LC reduced because of the significant particle agglomeration during pyrolysis process. However, the volume of HC sharply increased because of the transformation of hemicellulose into foam-like material at higher temperature. The lower values of mean absolute error strongly suggests that it is feasible to predict the properties (the contents of C, H, O, mass and energy yield) of real biomass derived bio-char based on the properties of three pseudo components derived bio-char.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Biochar as a sorbent for contaminant management in soil and water: A review
Ahmad, M., Rajapaksha, A. U., Lim, J. E., Zhang, M., Bolan, N., Mohan, D., Vithanage, M., Lee, S. S., & Ok, Y. S. (2014) · Chemosphere · doi:10.1016/j.chemosphere.2013.10.071 · Cited by 4,662
Kambo, H. S., & Dutta, A. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.01.050 · Cited by 1,746
Angın, D. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2012.10.150 · Cited by 733
Ma, Z., Sun, Q., Ye, J., Yao, Q., & Zhao, C. (2016) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2015.12.007 · Cited by 248
Self-citation
Cited by
Chen, D., Cen, K., Zhuang, X., Gan, Z., Zhou, J., Zhang, Y., & Zhang, H. (2022) · Combustion and Flame · doi:10.1016/j.combustflame.2022.112142 · Cited by 902
Application of biochar in concrete – A review
Senadheera, S. S., Gupta, S., Kua, H. W., Hou, D., Kim, S., Tsang, D. C. W., & Ok, Y. S. (2023) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2023.105204 · Cited by 255
Zheng, Q., Zhang, D., Fu, P., Wang, A., Sun, Y., Li, Z., & Fan, Q. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.135316 · Cited by 149
Impact of heating rates on the evolution of function groups of the biochar from lignin pyrolysis
Li, C., Hayashi, J.-I., Sun, Y., Zhang, L., Zhang, S., Wang, S., & Hu, X. (2021) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2021.105031 · Cited by 143
Self-citationCheng, J., Hu, S.-C., Sun, G.-T., Geng, Z.-C., & Zhu, M.-Q. (2021) · Industrial Crops and Products · doi:10.1016/j.indcrop.2021.113690 · Cited by 59
Metadata
- Authors
- Ma, Z., Yang, Y., Wu, Y., Xu, J., Peng, H., Liu, X., Zhang, W., & Wang, S.
- Venue
- Journal of Analytical and Applied Pyrolysis
- Publisher
- Elsevier BV
- Published
- 2019-06
- Volume
- 140
- Pages
- 195-204
- ISSN
- 0165-2370 (ISSN-L)
- OpenAlex
- W2923427047
- Cited by
- 217
- References
- 5
- FWCI
- 7.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: In-depth comparison of the physicochemical characteristics of bio-char derived from biomass pseudo components: Hemicellulose, cellulose, and lignin. https://app.cochat.ai/papers/10.1016/j.jaap.2019.03.015
- The paper
- Ma, Z., Yang, Y., Wu, Y., Xu, J., Peng, H., Liu, X., Zhang, W., & Wang, S. (2019). In-depth comparison of the physicochemical characteristics of bio-char derived from biomass pseudo components: Hemicellulose, cellulose, and lignin. Journal of Analytical and Applied Pyrolysis. https://doi.org/10.1016/j.jaap.2019.03.015
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.