The DOI matches its Crossref record; 108 of the 108 references it cites were found in a registry or an index.
Efficiency and proportions of waste tyre pyrolysis products depending on the reactor type—A review
Open accessAbstract
This article discusses the current use of different pyrolytic reactors, their constructions and operating principles regarding the yields of main products of waste tyre pyrolytic recycling. Whether one makes a larger or smaller profit, or even a loss due to a surcharge being levied on waste tyre recycling, depends on the sale of the pyrolysis products (gas, char, oil), the proportions and market prices of which differ. The cheapest is gas, which can be used as a source of technological heat of energetically self-sufficient pyrolysis or after purification, can be burned in a boiler and converted into heat or electricity. Raw char is not expensive either. It requires upgrading and then, as carbon black, can be re-used for the production of tyres or in the form of improved carbon can be used as an absorber or catalyst. The most expensive is oil, containing mainly aromatic compounds, on the condition that it will not be burned as diesel or liquid fuel. Hence, the oil yields obtained in various types of pyrolysers are given. This review of pyrolysis reactors is organised according to the criterion of charge movement in the reactor and the means of bringing this about. Depending on the method and speed of movement of the load in reactors, they are classified as fixed-bed and movable-bed reactors. The latter group is subdivided, depending on the method of inducing this movement, into pneumatic (bubbling, spouted, circulating or transport fluidised beds), mechanical (rotary kiln, rake, auger, ablative, stirred) reactors and reactors in which the charge moves under gravity. This review focuses on the construction and operating principles of the reactors and the yields of the products of pyrolytic thermal decomposition of scrap tyres. The summary and comparison of main product yields (oil/gas/coal) obtained in different reactors and by different authors, presented in graphical and tabular form, constitute a summary and supplement to this work.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
Biomass Gasification and Pyrolysis: Practical Design and Theory
Basu, P. (2010) · Cited by 1,332
International Conference on Recent Trends in Physics 2016 (ICRTP2016)
(2016) · Journal of Physics: Conference Series · doi:10.1088/1742-6596/755/1/011001 · Cited by 822
Pyrolysis of waste tyres: A review
Williams, P. T. (2013) · Waste Management · doi:10.1016/j.wasman.2013.05.003 · Cited by 807
Catalysis for conversion of biomass to fuels via pyrolysis and gasification: A review
Bulushev, D. A., & Ross, J. R. H. (2011) · Catalysis Today · doi:10.1016/j.cattod.2011.02.005 · Cited by 615
Progress in used tyres management in the European Union: A review
Sienkiewicz, M., Kucinska-Lipka, J., Janik, H., & Balas, A. (2012) · Waste Management · doi:10.1016/j.wasman.2012.05.010 · Cited by 559
Catalytic co-pyrolysis of lignocellulosic biomass with polymers: a critical review
Zhang, X., Lei, H., Chen, S., & Wu, J. (2016) · Green Chemistry · doi:10.1039/c6gc00911e · Cited by 497
López, A., de Marco, I., Caballero, B. M., Laresgoiti, M. F., Adrados, A., & Aranzabal, A. (2011) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2011.03.030 · Cited by 479
A review of recent laboratory research and commercial developments in fast pyrolysis and upgrading
Butler, E., Devlin, G., Meier, D., & McDonnell, K. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.035 · Cited by 471
Malkow, T. (2004) · Waste Management · doi:10.1016/s0956-053x(03)00038-2 · Cited by 455
Composition of oils derived from the batch pyrolysis of tyres
Cunliffe, A. M., & Williams, P. T. (1998) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(97)00085-5 · Cited by 438
The pyrolysis of scrap automotive tyres
Williams, P. T., Besler, S., & Taylor, D. T. (1990) · Fuel · doi:10.1016/0016-2361(90)90193-t · Cited by 378
Feedstock recycling of polymers by pyrolysis in a fluidised bed
Kaminsky, W., Predel, M., & Sadiki, A. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2003.05.002 · Cited by 354
Influence of temperature on biomass pyrolysis in a conical spouted bed reactor
Amutio, M., Lopez, G., Artetxe, M., Elordi, G., Olazar, M., & Bilbao, J. (2012) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2011.04.002 · Cited by 345
Co-pyrolysis of biomass with waste tyres: Upgrading of liquid bio-fuel
Martínez, J. D., Veses, A., Mastral, A. M., Murillo, R., Navarro, M. V., Puy, N., Artigues, A., Bartrolí, J., & García, T. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2013.11.015 · Cited by 337
Bio-oil production from rice husk fast pyrolysis in a conical spouted bed reactor
Alvarez, J., Lopez, G., Amutio, M., Bilbao, J., & Olazar, M. (2014) · Fuel · doi:10.1016/j.fuel.2014.02.074 · Cited by 329
The vacuum pyrolysis of used tires
Roy, C., Chaala, A., & Darmstadt, H. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00017-0 · Cited by 328
Pilot-Scale Pyrolysis of Scrap Tires in a Continuous Rotary Kiln Reactor
Li, S.-Q., Yao, Q., Chi, Y., Yan, J.-H., & Cen, K.-F. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie030115m · Cited by 283
Opportunities and barriers for producing high quality fuels from the pyrolysis of scrap tires
Hita, I., Arabiourrutia, M., Olazar, M., Bilbao, J., Arandes, J. M., & Castaño, P. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.11.081 · Cited by 268
Elordi, G., Olazar, M., López, G., Amutio, M., Artetxe, M., Aguado, R., & Bilbao, J. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.10.015 · Cited by 264
Evaluation of two different scrap tires as hydrocarbon source by pyrolysis
Ucar, S., Karagoz, S., Ozkan, A. R., & Yanik, J. (2005) · Fuel · doi:10.1016/j.fuel.2005.04.002 · Cited by 263
Aysu, T., & Küçük, M. M. (2014) · Energy · doi:10.1016/j.energy.2013.11.053 · Cited by 251
Production of dl-limonene by vacuum pyrolysis of used tires
Pakdel, H., Pantea, D. M., & Roy, C. (2001) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(00)00136-4 · Cited by 245
Vacuum pyrolysis of waste tires with basic additives
Zhang, X., Wang, T., Ma, L., & Chang, J. (2008) · Waste Management · doi:10.1016/j.wasman.2007.10.009 · Cited by 242
ROFIQULISLAM, M., HANIU, H., & RAFIQULALAMBEG, M. (2008) · Fuel · doi:10.1016/j.fuel.2008.04.036 · Cited by 234
Biomass Valorization for Fuel and Chemicals Production -- A Review
Briens, C., Piskorz, J., & Berruti, F. (2008) · International Journal of Chemical Reactor Engineering · doi:10.2202/1542-6580.1674 · Cited by 234
Continuous pyrolysis of waste tyres in a conical spouted bed reactor
López, G., Olazar, M., Aguado, R., & Bilbao, J. (2010) · Fuel · doi:10.1016/j.fuel.2010.03.029 · Cited by 223
Pyrolysis of waste tires in a circulating fluidized-bed reactor
Dai, X., Yin, X., Wu, C., Zhang, W., & Chen, Y. (2001) · Energy · doi:10.1016/s0360-5442(01)00003-2 · Cited by 213
Syngas from steam gasification of polyethylene in a conical spouted bed reactor
Erkiaga, A., Lopez, G., Amutio, M., Bilbao, J., & Olazar, M. (2013) · Fuel · doi:10.1016/j.fuel.2013.03.022 · Cited by 209
Liquid fuel production from waste tyre pyrolysis and its utilisation in a diesel engine
Frigo, S., Seggiani, M., Puccini, M., & Vitolo, S. (2014) · Fuel · doi:10.1016/j.fuel.2013.08.044 · Cited by 201
Antoniou, N., & Zabaniotou, A. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.12.005 · Cited by 194
Energetic valorization of waste tires
Machin, E. B., Pedroso, D. T., & de Carvalho, J. A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.09.110 · Cited by 185
Waste truck-tyre processing by flash pyrolysis in a conical spouted bed reactor
Lopez, G., Alvarez, J., Amutio, M., Mkhize, N. M., Danon, B., van der Gryp, P., Görgens, J. F., Bilbao, J., & Olazar, M. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.03.051 · Cited by 185
Aromatic chemicals from the catalytic pyrolysis of scrap tyres
Williams, P. T., & Brindle, A. J. (2003) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(02)00059-1 · Cited by 184
Kaminsky, W., & Mennerich, C. (2001) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(00)00129-7 · Cited by 180
Fernandez-Akarregi, A. R., Makibar, J., Lopez, G., Amutio, M., & Olazar, M. (2013) · Fuel Processing Technology · doi:10.1016/j.fuproc.2013.02.022 · Cited by 180
06/01480 Evaluation of two different scrap tires as hydrocarbon source by pyrolysis
(2006) · Fuel and Energy Abstracts · doi:10.1016/s0140-6701(06)81484-0 · Cited by 176
Valorisation of waste tyre by pyrolysis in a moving bed reactor
Aylón, E., Fernández-Colino, A., Murillo, R., Navarro, M. V., García, T., & Mastral, A. M. (2010) · Waste Management · doi:10.1016/j.wasman.2009.10.001 · Cited by 169
Wax Formation in the Pyrolysis of Polyolefins in a Conical Spouted Bed Reactor
Aguado, R., Olazar, M., San José, Gaisán, B., & Bilbao, J. (2002) · Energy & Fuels · doi:10.1021/ef020043w · Cited by 168
Biomass Oxidative Flash Pyrolysis: Autothermal Operation, Yields and Product Properties
Amutio, M., Lopez, G., Aguado, R., Bilbao, J., & Olazar, M. (2012) · Energy & Fuels · doi:10.1021/ef201662x · Cited by 168
The production of biofuels and renewable chemicals by fast pyrolysis of biomass
Bridgwater, A. V. (2007) · International Journal of Global Energy Issues · doi:10.1504/ijgei.2007.013654 · Cited by 166
Pyrolysis in auger reactors for biochar and bio-oil production: A review
Brassard, P., Godbout, S., & Raghavan, V. (2017) · Biosystems Engineering · doi:10.1016/j.biosystemseng.2017.06.020 · Cited by 166
Catalytic pyrolysis of tyres: influence of catalyst temperature
Williams, P. T., & Brindle, A. J. (2002) · Fuel · doi:10.1016/s0016-2361(02)00196-5 · Cited by 159
Benallal, B., Roy, C., Pakdel, H., Chabot, S., & Poirier, M. A. (1995) · Fuel · doi:10.1016/0016-2361(95)00165-2 · Cited by 155
Feedstock recycling of synthetic and natural rubber by pyrolysis in a fluidized bed
Kaminsky, W., Mennerich, C., & Zhang, Z. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.11.012 · Cited by 144
López, G., Olazar, M., Amutio, M., Aguado, R., & Bilbao, J. (2009) · Energy & Fuels · doi:10.1021/ef900582k · Cited by 139
Optimization of pyrolysis conditions of scrap tires under inert gas atmosphere
Barbooti, M. M., Mohamed, T. J., Hussain, A. A., & Abas, F. O. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2004.05.001 · Cited by 138
Influence of FCC catalyst steaming on HDPE pyrolysis product distribution
Olazar, M., López, G., Amutio, M., Elordi, G., Aguado, R., & Bilbao, J. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.10.016 · Cited by 137
Recycling of waste plastics by ultrapyrolysis using an internally circulating fluidized bed reactor
Milne, B. J., Behie, L. A., & Berruti, F. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00014-5 · Cited by 137
Waste Tire Pyrolysis: Comparison between Fixed Bed Reactor and Moving Bed Reactor
Aylón, E., Fernández-Colino, A., Navarro, M. V., Murillo, R., García, T., & Mastral, A. M. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie071573o · Cited by 134
A review of waste tyre gasification
Oboirien, B. O., & North, B. C. (2017) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2017.09.057 · Cited by 133
Demonstration of the waste tire pyrolysis process on pilot scale in a continuous auger reactor
Martínez, J. D., Murillo, R., García, T., & Veses, A. (2013) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2013.07.077 · Cited by 133
Pyrolysis of waste tyres with zeolite USY and ZSM-5 catalysts
Boxiong, S., Chunfei, W., Guo, B., Wang, R., & Liangcai (2006) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2006.07.006 · Cited by 129
Vacuum Pyrolysis of Waste Tires by Continuously Feeding into a Conical Spouted Bed Reactor
López, G., Olazar, M., Aguado, R., Elordi, G., Amutio, M., Artetxe, M., & Bilbao, J. (2010) · Industrial & Engineering Chemistry Research · doi:10.1021/ie1000604 · Cited by 129
Product distribution obtained in the pyrolysis of tyres in a conical spouted bed reactor
Arabiourrutia, M., López, G., Elordi, G., Olazar, M., Aguado, R., & Bilbao, J. (2006) · Chemical Engineering Science · doi:10.1016/j.ces.2006.12.026 · Cited by 126
Catalyst Effect on the Composition of Tire Pyrolysis Products
Olazar, M., Aguado, R., Arabiourrutia, M., López, G., Barona, A., & Bilbao, J. (2008) · Energy & Fuels · doi:10.1021/ef8002153 · Cited by 125
Mastral, A. M., Murillo, R., Callén, M. S., García, T., & Snape, C. E. (2000) · Energy & Fuels · doi:10.1021/ef990183e · Cited by 125
Chemical Recycling of Polymer Materials
Sasse, F., & Emig, G. (1998) · Chemical Engineering & Technology · Cited by 121
Continuous Polyolefin Cracking on an HZSM-5 Zeolite Catalyst in a Conical Spouted Bed Reactor
Elordi, G., Olazar, M., López, G., Artetxe, M., & Bilbao, J. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie2002999 · Cited by 121
Evaluation of the properties of tyre pyrolysis oils obtained in a conical spouted bed reactor
Álvarez, J., López, G., Amutio, M., Mkhize, N. M., Danon, B., van der Gryp, P., Görgens, J. F., Bilbao, J., & Olazar, M. (2017) · Energy · doi:10.1016/j.energy.2017.03.163 · Cited by 121
Formation of dl-limonene in used tire vacuum pyrolysis oils
Pakdel, H., Roy, C., Aubin, H., Jean, G. E., & Coulombe, S. (1991) · Environmental Science & Technology · doi:10.1021/es00021a018 · Cited by 118
Raj, R. E., Kennedy, Z. R., & Pillai, B. C. (2012) · Energy Conversion and Management · doi:10.1016/j.enconman.2012.11.012 · Cited by 116
Fuel production by hydrotreating of triglycerides on NiMo/Al2O3/F catalyst
Kovács, S., Kasza, T., Thernesz, A., Horváth, I. W., & Hancsók, J. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.05.110 · Cited by 108
Luo, S., & Feng, Y. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.12.076 · Cited by 108
Fluidized-bed gasification of waste tire powders
Leung, D. Y. C., & Wang, C. (2003) · Fuel Processing Technology · doi:10.1016/s0378-3820(03)00054-7 · Cited by 106
Effect of Vacuum on Lignocellulosic Biomass Flash Pyrolysis in a Conical Spouted Bed Reactor
Amutio, M., López, G., Aguado, R., Artetxe, M., Bilbao, J., & Olazar, M. (2011) · Energy & Fuels · doi:10.1021/ef200712h · Cited by 100
Pyrolysis of waste tyres: The influence of USY catalyst/tyre ratio on products
Boxiong, S., Chunfei, W., Cai, L., Guo, B., & Wang, R. (2006) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2006.07.004 · Cited by 93
Innovation in Pyrolysis Technology for Management of Scrap Tire: a Solution of Energyand Environment
Islam, M. R., Parveen, M., HANIU, H., & Sarker, M. R. I. (2010) · International Journal of Environmental Science and Development · doi:10.7763/ijesd.2010.v1.18 · Cited by 93
Microwave Assisted Pyrolysis of Plastic Waste
Aishwarya, K., & Sindhu, N. (2016) · Procedia Technology · doi:10.1016/j.protcy.2016.08.197 · Cited by 89
Choi, G.-G., Oh, S.-J., & Kim, J.-S. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.02.119 · Cited by 88
Hita, I., Gutiérrez, A., Olazar, M., Bilbao, J., Arandes, J. M., & Castaño, P. (2014) · Fuel · doi:10.1016/j.fuel.2014.12.055 · Cited by 87
Gasification of plastic waste as waste-to-energy or waste-to-syngas recovery route
Brems, A., Dewil, R., Baeyens, J., & Zhang, R. (2013) · Natural Science · doi:10.4236/ns.2013.56086 · Cited by 87
Characterization of used tire vacuum pyrolysis oil: Nitrogenous compounds from the naphtha fraction
Mirmiran, S., Pakdel, H., & Roy, C. (1992) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/0165-2370(92)85014-c · Cited by 87
Derived oil production by catalytic pyrolysis of scrap tires
Li, W., Huang, C., Li, D., Huo, P., Wang, M., Han, L., Chen, G., Li, H., Li, X., Wang, Y., et al. (2016) · CHINESE JOURNAL OF CATALYSIS (CHINESE VERSION) · doi:10.1016/s1872-2067(15)60998-6 · Cited by 87
Characterization of naphtha and carbon black obtained by vacuum pyrolysis of polyisoprene rubber
Roy, C., Darmstadt, H., Benallal, B., & Amen-Chen, C. (1997) · Fuel Processing Technology · doi:10.1016/s0378-3820(96)01044-2 · Cited by 84
Amutio, M., López, G., Álvarez, J., Moreira, R. J., Duarte, G. V., Nunes, J., Olazar, M., & Bilbao, J. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.11.114 · Cited by 81
Antoniou, N., & Zabaniotou, A. A. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.03.101 · Cited by 80
Rotary kiln and batch pyrolysis of waste tire to produce gasoline and diesel like fuels
Ayanoğlu, A., & Yumrutaş, R. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.12.070 · Cited by 74
Bičáková, O., & Straka, P. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.069 · Cited by 74
Design of an automated solar concentrator for the pyrolysis of scrap rubber
Zeaiter, J., Ahmad, M. N., Rooney, D. W., Samneh, B., & Shammas, E. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.05.019 · Cited by 69
Modelling of Spouted and Spout-Fluid Beds: Key for Their Successful Scale Up
Moliner, C., Marchelli, F., Bosio, B., & Arato, E. (2017) · Energies · doi:10.3390/en10111729 · Cited by 69
Díez, C., Sánchez, M. E., Haxaire, P., Martínez, O., & Morán, A. (2005) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2004.11.024 · Cited by 66
Effect of power level on the microwave pyrolysis of tire powder
Song, Z., Yang, Y., Sun, J., Zhao, X., Wang, W., Mao, Y., & Ma, C. (2017) · Energy · doi:10.1016/j.energy.2017.03.150 · Cited by 61
Two stage pyrolysis-catalytic gasification of waste tyres: Influence of process parameters
Elbaba, I. F., & Williams, P. T. (2012) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2012.05.020 · Cited by 60
Gas from the Pyrolysis of Scrap Tires in a Fluidized Bed Reactor
Conesa, J. A., Font, R., & Marcilla, A. F. (1996) · Energy & Fuels · doi:10.1021/ef950152t · Cited by 58
Olazar, M., Álvarez, S., Aguado, R., & José, M. J. S. (2003) · Chemical Engineering & Technology · doi:10.1002/ceat.200300006 · Cited by 53
Westerhout, R. W. J., Waanders, J., Kuipers, J. A. M., & Swaaij, W. P. M. V. (1998) · Industrial & Engineering Chemistry Research · doi:10.1021/ie970703y · Cited by 52
Optimizing H2 Production from Waste Tires via Combined Steam Gasification and Catalytic Reforming
Portofino, S., Casu, S., Iovane, P., Russo, A., Martino, M., Donatelli, A., & Galvagno, S. (2011) · Energy & Fuels · doi:10.1021/ef200072c · Cited by 52
Heating rate effects on pyrolytic vapors from scrap truck tires
Akkouche, N., Balistrou, M., Loubar, K., Awad, S., & Tazerout, M. (2016) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2016.10.005 · Cited by 48
Pyrolysis of blends of coal and tyre wastes in a fixed bed reactor and a rotary oven
Acevedo, B., Barriocanal, C., & Álvarez, R. (2013) · Fuel · doi:10.1016/j.fuel.2012.12.077 · Cited by 47
Rotating Cone Bio‐Oil Production and Applications
Wagenaar, B. M., Venderbosch, R. H., Carrasco, J. E., Strenziok, R., & van der Aa, B. J. (2001) · Progress in Thermochemical Biomass Conversion · doi:10.1002/9780470694954.ch105 · Cited by 46
Cu-doped catalysts and their impacts on tire-derived oil and sulfur removal
Yuwapornpanit, R., & Jitkarnka, S. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.11.009 · Cited by 42
Limonene-Rich Liquids from Pyrolysis of Heavy Automotive Tire Wastes
ROFIQUL, I. M., HANIU, H., & RAFIQUL, A. B. M. (2007) · Journal of Environment and Engineering · doi:10.1299/jee.2.681 · Cited by 41
Microwave pyrolysis of polymeric materials
Undri, A., Rosi, L., Frediani, M., et al. (2011) · InTech eBooks · doi:10.5772/24008 · Cited by 36
Catalytic Pyrolysis of Waste Tyre Rubber into Hydrocarbons Via Base Catalysts
Shah, J., Jan, M. R., & Mabood, F. (2008) · DOAJ (DOAJ: Directory of Open Access Journals) · Cited by 36
Zhang, Y. S., Tao, Y., Huang, J., & Williams, P. T. (2017) · Waste Management & Research The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x17722207 · Cited by 27
The influence of the pyrolysis conditions in a rotary oven on the characteristics of the products
Acevedo, B., & Barriocanal, C. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2014.11.016 · Cited by 24
Controlled Microwave-Induced Pyrolysis of Waste Rubber Tires
Yang, A. L. C., & Ani, F. N. (2016) · International Journal of Technology · doi:10.14716/ijtech.v7i2.2973 · Cited by 21
Aziz, M. A., Al-khulaidi, R. A., Rashid, M., Islam, M. R., & Rashid, M. (2017) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/184/1/012056 · Cited by 21
Thermogravimetric analysis/ pyrolysis of used tyres and waste rubber
Januszewicz, K., Klein, M., Klugmann-Radziemska, E., & Kardaś, D. (2017) · Prace Naukowe Uniwersytetu Ekonomicznego we Wrocławiu · doi:10.5277/ppmp170211 · Cited by 21
Self-citationModern methods of thermochemical biomass conversion into gas, liquid and solid fuels
Lewandowski, W. M., Klugmann-Radziemska, E., Ryms, M., & Ostrowski, P. K. (2011) · Ecological Chemistry and Engineering S-chemia I Inzynieria Ekologiczna S · Cited by 21
Self-citationPyrolysis of Rubber in a Screw Reactor
Lozhechnik, A. V., & Савчин, В. В. (2016) · Journal of Engineering Physics and Thermophysics · doi:10.1007/s10891-016-1517-2 · Cited by 19
Utilization of waste tires as fuel for cement production
Nakajima, Y., & Matsuyuki, M. (1981) · Conservation & Recycling · doi:10.1016/0361-3658(81)90018-7 · Cited by 18
Condensation of the hot volatiles from waste tyre pyrolysis by quenching
Mkhize, N. M., Danon, B., van der Gryp, P., & Görgens, J. F. (2017) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2017.02.007 · Cited by 16
Valorisation of Waste Tires by Pyrolysis over a FCC Catalyst in a Conical Spouted Bed Reactor
Amutio, M., López, G., Artetxe, M., Erkiaga, A., Álvarez, J., Barbarias, I., & Olazar, M. (2012) · Chemical engineering transactions · doi:10.3303/cet1229137 · Cited by 13
Characterization of the Liquid Obtained in Tyre Pyrolysis in a Conical Spouted Bed Reactor
Arabiourrutia, M., López, G., Elordi, G., Olazar, M., Aguado, R., & Bilbao, J. (2007) · International Journal of Chemical Reactor Engineering · doi:10.2202/1542-6580.1570 · Cited by 12
Riedewald, F., Goode, K., Sexton, A., & Sousa-Gallagher, M. J. (2016) · MethodsX · doi:10.1016/j.mex.2016.05.003 · Cited by 5
Waste tyre pyrolysis in a conical spouted bed reactor under vacuum conditions
López, G., Amutio, M., Elordi, G., Artetxe, M., Erkiaga, A., Barona, A., & Olazar, M. (2010) · Cited by 4
Cited by
The future of hydrogen: Challenges on production, storage and applications
Rasul, M. G., Hazrat, M. A., Sattar, M. A., Jahirul, M. I., & Shearer, M. J. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.116326 · Cited by 856
Al-Rumaihi, A., Shahbaz, M., Mckay, G., Mackey, H., & Al-Ansari, T. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112715 · Cited by 650
Municipal solid waste as a sustainable resource for energy production: State-of-the-art review
Shah, A. V., Srivastava, V. K., Mohanty, S. S., & Varjani, S. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.105717 · Cited by 288
Waste tyre valorization by catalytic pyrolysis – A review
Arabiourrutia, M., Lopez, G., Artetxe, M., Alvarez, J., Bilbao, J., & Olazar, M. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109932 · Cited by 284
Devulcanisation and reclaiming of tires and rubber by physical and chemical processes: A review
Bockstal, L., Berchem, T., Schmetz, Q., & Richel, A. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.07.049 · Cited by 257
Metadata
- Authors
- Lewandowski, W. M., Januszewicz, K., & Kosakowski, W.
- Venue
- Journal of Analytical and Applied Pyrolysis
- Publisher
- Elsevier BV
- Published
- 2019-06
- Volume
- 140
- Pages
- 25-53
- ISSN
- 0165-2370 (ISSN-L)
- OpenAlex
- W2933204821
- Cited by
- 282
- References
- 108
- FWCI
- 12.44
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.