Influence of temperature and time on initial pyrolysis of cellulose and xylan
The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
The aim of this study was to investigate the effects of temperature and reaction time on the primary pyrolysis of cellulose and xylan. Fast pyrolysis of cellulose and xylan was carried out with a micropyrolyser connected to a gas chromatograph-mass spectrometer/flame ionisation detector (GC–MS/FID) to separate and identify volatile components, both qualitatively and quantitatively. This set-up meant a minimum amount of secondary reactions, low impact of the heating period and at the same time provided rapid and accurate analyses. The two biomass components investigated were: cellulose and hemicellulose (represented by xylan). They were pyrolysed during 0.5, 1, 2 and 5 s (s) and within a temperature range of 400–600 °C. The results showed that levoglucosan (1, 6-anhydro β-D-glucopyranose) is the main chemical compound released during cellulose pyrolysis. It increased with increasing temperature and time. The main volatile compounds produced from pyrolysis of xylan are: 1-hydroxy-2-butanone, 4-hydroxy-5, 6-dihydro-(2 H)-pyran-2-one, 1-hydroxy-2-propanone (acetol), acetaldehyde and hydroxyacetaldehyde (HAA). HAA was the most abundant chemical compound released during xylan pyrolysis, increasing with higher temperatures and time. Acetol and acetaldehyde also showed similar behaviour. The chemical compounds released from cellulose and xylan fast pyrolysis are primary products and assumed to be produced directly from both cellulose and xylan molecules and not from secondary degradation. In this study, possible reaction routes during biomass primary pyrolysis are also suggested based on the product distribution from the thermal decomposition of cellulose and xylan.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Bio-oil production and upgrading research: A review
Xiu, S., & Shahbazi, A. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.04.028 · Cited by 1,127
Stefanidis, S. D., Kalogiannis, K. G., Iliopoulou, E. F., Michailof, C. M., Pilavachi, P. A., & Lappas, A. A. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.10.013 · Cited by 775
Kinetics and Mechanism of Cellulose Pyrolysis
Lin, Y.-C., Cho, J., Tompsett, G. A., Westmoreland, P. R., & Huber, G. W. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp906702p · Cited by 698
Product Distribution from the Fast Pyrolysis of Hemicellulose
Patwardhan, P. R., Brown, R. C., & Shanks, B. H. (2011) · ChemSusChem · doi:10.1002/cssc.201000425 · Cited by 463
Distinguishing primary and secondary reactions of cellulose pyrolysis
Patwardhan, P. R., Dalluge, D. L., Shanks, B. H., & Brown, R. C. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2011.02.018 · Cited by 352
Effect of the Temperature on the Composition of Lignin Pyrolysis Products
Jiang, G., Nowakowski, D. J., & Bridgwater, A. V. (2010) · Energy & Fuels · doi:10.1021/ef100363c · Cited by 332
Characteristics and mechanism study of analytical fast pyrolysis of poplar wood
Dong, C.-Q., Zhang, Z.-F., Lu, Q., & Yang, Y.-P. (2012) · Energy Conversion and Management · doi:10.1016/j.enconman.2011.12.012 · Cited by 209
Cited by
Chen, D., Cen, K., Zhuang, X., Gan, Z., Zhou, J., Zhang, Y., & Zhang, H. (2022) · Combustion and Flame · doi:10.1016/j.combustflame.2022.112142 · Cited by 902
Lignocellulosic biomass-based pyrolysis: A comprehensive review
K N, Y., T, P. D., P, S., S, K., R, Y. K., Varjani, S., AdishKumar, S., Kumar, G., & J, R. B. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2021.131824 · Cited by 529
Zong, P., Jiang, Y., Tian, Y., Li, J., Yuan, M., Ji, Y., Chen, M., Li, D., & Qiao, Y. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.112777 · Cited by 412
Catalytic pyrolysis of lignocellulosic biomass for bio-oil production: A review
Wang, Y., Akbarzadeh, A., Chong, L., Du, J., Tahir, N., & Awasthi, M. K. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2022.134181 · Cited by 247
Identifying the primary reactions and products of fast pyrolysis of alkali lignin
Supriyanto, Usino, D. O., Ylitervo, P., Dou, J., Sipponen, M. H., & Richards, T. (2020) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2020.104917 · Cited by 54
“Other studies have also reported evidence of acetaldehyde from cellulose and hemicellulose pyrolysis with a similar experimental set-up [25,56,57].”
BackgroundSelf-citation
Metadata
- Authors
- Usino, D. O., Supriyanto, Ylitervo, P., Pettersson, A., & Richards, T.
- Venue
- Journal of Analytical and Applied Pyrolysis
- Publisher
- Elsevier BV
- Published
- 2020-05
- Volume
- 147
- Pages
- 104782
- ISSN
- 0165-2370 (ISSN-L)
- OpenAlex
- W3004875987
- Cited by
- 95
- References
- 8
- FWCI
- 4.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Influence of temperature and time on initial pyrolysis of cellulose and xylan. https://app.cochat.ai/papers/10.1016/j.jaap.2020.104782
- The paper
- Usino, D. O., Supriyanto, Ylitervo, P., Pettersson, A., & Richards, T. (2020). Influence of temperature and time on initial pyrolysis of cellulose and xylan. Journal of Analytical and Applied Pyrolysis. https://doi.org/10.1016/j.jaap.2020.104782
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.