Fe oxides-biochar composites produced by hydrothermal carbonization and pyrolysis of biomass waste
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
The synthesis of biochar-metal oxide composites for removing heavy metals from aqueous solutions or remediating polluted soils has attracted increased attention. Amongst them, Fe oxide composites stand out due to possible magnetic properties and low price. Two types of Fe oxide-biochar composites were prepared by impregnation with ferric sulfate salts of biomass waste or corresponding hydrochar, followed by pyrolysis at 550 °C for 5 h. During pyrolysis, Fe increased carbonization, leading to biochar with low H/C values. Properties of Fe oxide-biochar composite greatly depend on the feedstock. The Fe content in the final Fe oxide-biochar was higher than in biochar obtained by direct pyrolysis of biomass waste. Some of Fe was in the form of FeS. Impregnation of hydrochar followed by pyrolysis lead to a Fe oxide-biochar composite with lower ash content and higher micro- and macro-porosity. In this case, the Fe was in the form of Fe oxides.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hydrothermal conversion of biomass waste to activated carbon with high porosity: A review
Jain, A., Balasubramanian, R., & Srinivasan, M. P. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.08.014 · Cited by 1,199
Biochar technology in wastewater treatment: A critical review
Xiang, W., Zhang, X., Chen, J., Zou, W., He, F., Hu, X., Tsang, D. C. W., Ok, Y. S., & Gao, B. (2020) · Chemosphere · doi:10.1016/j.chemosphere.2020.126539 · Cited by 884
Hydrothermal carbonization: Fate of inorganics
Reza, M. T., Lynam, J. G., Uddin, M. H., & Coronella, C. J. (2013) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2012.12.004 · Cited by 492
Tan, G., Sun, W., Xu, Y., Wang, H., & Xu, N. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.03.147 · Cited by 388
Cited by
Khalid, M. Y., Arif, Z. U., Ahmed, W., & Arshad, H. (2022) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2021.e00382 · Cited by 314
Tiwari, S. K., Bystrzejewski, M., De Adhikari, A., Huczko, A., & Wang, N. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101023 · Cited by 218
Ighalo, J. O., Ohoro, C. R., Ojukwu, V. E., Oniye, M., Shaikh, W. A., Biswas, J. K., Seth, C. S., Mohan, G. B. M., Chandran, S. A., & Rangabhashiyam, S. (2025) · iScience · doi:10.1016/j.isci.2024.111524 · Cited by 107
Zhong, S., Zhang, B., Liu, C., Shujaa aldeen, A., Mwenya, S., & Zhang, H. (2022) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2022.105544 · Cited by 86
Yang, M., Luo, S., Zeng, P., & Wu, Y. (2025) · Separations · doi:10.3390/separations12020020 · Cited by 20
Metadata
- Authors
- Álvarez, M. L., Gascó, G., Palacios, T., Paz-Ferreiro, J., & Méndez, A.
- Venue
- Journal of Analytical and Applied Pyrolysis
- Publisher
- Elsevier BV
- Published
- 2020-10
- Volume
- 151
- Pages
- 104893
- ISSN
- 0165-2370 (ISSN-L)
- OpenAlex
- W3045960550
- Cited by
- 81
- References
- 4
- FWCI
- 2.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.