The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Optimising the mechanical properties of Ti-6Al-4V components produced by wire + arc additive manufacturing with post-process heat treatments
Open accessAbstract
Wire + Arc Additive Manufacturing (WAAM) is a promising manufacturing process for producing large aerospace components. Based on welding technology, the process is highly affordable, has a very high deposition rate and is not limited by chamber size. Ti-6Al-4V is a promising candidate material for this technology given that it is extensively used in aerospace applications and some large, high buy-fly ratio components can be more efficiently produced by WAAM than via the conventional machining from billet approach. There is currently limited knowledge about whether additional post processes including heat treatments and hot isostatic pressing are necessary to unlock the optimal mechanical properties of Ti-6Al-4V components produced by WAAM. This work explores a range of different post process treatments and the effects on the microstructure and tensile properties of Ti-6Al-4V components produced by WAAM. The relatively slow cooling rate (10-20Ks−1) during the β-α transformation produced Widmanstätten-α and offered an optimal balance between strength and ductility. Hot Isostatic Pressing (HIPing) removed gas porosity but was not effective in improving strength or ductility. Residual tensile stresses in as-built components severely impair ductility and should be removed through stress relief treatments.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Cited by
Additive manufacturing of Ti6Al4V alloy: A review
Liu, S., & Shin, Y. C. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.107552 · Cited by 2,472
Grain structure control during metal 3D printing by high-intensity ultrasound
Todaro, C. J., Easton, M. A., Qiu, D., Zhang, D., Bermingham, M. J., Lui, E. W., Brandt, M., StJohn, D. H., & Qian, M. (2020) · Nature Communications · doi:10.1038/s41467-019-13874-z · Cited by 848
Self-citationCurrent Status and Perspectives on Wire and Arc Additive Manufacturing (WAAM)
Rodrigues, T. A., Duarte, V., Miranda, R. M., Santos, T. G., & Oliveira, J. P. (2019) · Materials · doi:10.3390/ma12071121 · Cited by 779
Progress and perspectives in laser additive manufacturing of key aeroengine materials
Tan, C., Weng, F., Sui, S., Chew, Y., & Bi, G. (2021) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2021.103804 · Cited by 520
A review on wire and arc additive manufacturing of titanium alloy
Lin, Z., Song, K., & Yu, X. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.08.018 · Cited by 374
Metadata
- Authors
- Bermingham, M. J., Nicastro, L., Kent, D., Chen, Y., & Dargusch, M. S.
- Venue
- Journal of Alloys and Compounds
- Publisher
- Elsevier BV
- Published
- 2018-07
- Volume
- 753
- Pages
- 247-255
- ISSN
- 0925-8388 (ISSN-L)
- OpenAlex
- W2799353774
- Cited by
- 227
- References
- 1
- FWCI
- 13.11
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.