The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Demystifying the sluggish diffusion effect in high entropy alloys
Abstract
Abstract Interdiffusion studies in Co-Cr-Fe-Mn-Ni, Co-Fe-Mn-Ni, Co-Cr-Fe-Ni, and Co-Cr-Mn-Ni, as well as a reevaluation of the previous results obtained for Al-Co-Cr-Fe-Ni, were conducted. In the experimental part, diffusion couples were annealed at four different temperatures: 1230, 1270, 1310 and 1350 K for each system. Then, the results were evaluated with use of the optimization-based technique, combined with the Miedema's thermodynamic description, what allowed obtaining of tracer diffusion coefficients for all elements in all considered systems. The correctness of the applied approach was tested on the example of Co-Cr-Fe-Mn-Ni system, showing very good agreement of determined tracer diffusivities with the values obtained by other authors. Obtained values of diffusivities were compared with the available data for a number of conventional binary and ternary systems. No signs of diffusion retardation were observed in the absolute temperature scale. In the case of temperature scale normalized with respect to the melting point, an abnormal behavior, previously attributed to the HEAs' sluggish diffusion effect was observed. However, it occurred only for alloys with prominent manganese content and was completely independent of the number of components, being just as likely to occur in binary systems as in HEAs. Therefore, the alleged sluggishness of diffusion in HEAs should be treated just as a result of specific compositions of the previously studied alloys and cannot be generalized for all high entropy systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
Reciprocal Relations in Irreversible Processes. I.
Onsager, L. (1931) · Physical Review · doi:10.1103/physrev.37.405 · Cited by 6,660
Reciprocal Relations in Irreversible Processes. II.
Onsager, L. (1931) · Physical Review · doi:10.1103/physrev.38.2265 · Cited by 5,367
Rost, C. M., Sachet, E., Borman, T., Moballegh, A., Dickey, E. C., Hou, D., Jones, J. L., Curtarolo, S., & Maria, J.-P. (2015) · Nature Communications · doi:10.1038/ncomms9485 · Cited by 3,525
Solid‐Solution Phase Formation Rules for Multi‐component Alloys
Zhang, Y., Zhou, Y. J., Lin, J. P., Chen, G. L., & Liaw, P. K. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200700240 · Cited by 3,466
Prediction of high-entropy stabilized solid-solution in multi-component alloys
Yang, X., & Zhang, Y. (2012) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2011.11.021 · Cited by 2,920
Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys
Guo, S., Ng, C., Lu, J., & Liu, C. T. (2011) · Journal of Applied Physics · doi:10.1063/1.3587228 · Cited by 2,911
Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys
Tsai, K.-Y., Tsai, M.-H., & Yeh, J.-W. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.04.058 · Cited by 2,366
Cited by
High-entropy alloys with heterogeneous microstructure: Processing and mechanical properties
Sathiyamoorthi, P., & Kim, H. S. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100709 · Cited by 766
Refractory high-entropy alloys: A focused review of preparation methods and properties
Xiong, W., Guo, A. X. Y., Zhan, S., Liu, C.-T., & Cao, S. C. (2023) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.08.046 · Cited by 429
Metadata
- Authors
- Dąbrowa, J., Zajusz, M., Kucza, W., Cieślak, G., Berent, K., Czeppe, T., Kulik, T., & Danielewski, M.
- Venue
- Journal of Alloys and Compounds
- Publisher
- Elsevier BV
- Published
- 2019-04
- Volume
- 783
- Pages
- 193-207
- ISSN
- 0925-8388 (ISSN-L)
- OpenAlex
- W2906524957
- Cited by
- 339
- References
- 33
- FWCI
- 9.27
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Demystifying the sluggish diffusion effect in high entropy alloys. https://app.cochat.ai/papers/10.1016/j.jallcom.2018.12.300
- The paper
- Dąbrowa, J., Zajusz, M., Kucza, W., Cieślak, G., Berent, K., Czeppe, T., Kulik, T., & Danielewski, M. (2019). Demystifying the sluggish diffusion effect in high entropy alloys. Journal of Alloys and Compounds. https://doi.org/10.1016/j.jallcom.2018.12.300
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.