The DOI matches its Crossref record.
Selective laser melted equiatomic CoCrFeMnNi high-entropy alloy: Microstructure, anisotropic mechanical response, and multiple strengthening mechanism
Abstract
Abstract One of the major challenges of equiatomic CoCrFeMnNi HEA is to manufacture parts with complex geometry that have higher yield strength. Equiatomic CoCrFeMnNi HEA was successfully fabricated in the present study with selective laser melting. The unique microstructure and mechanical anisotropy that generally appear in additive manufactured materials were investigated. SLM-built HEA has strongly oriented grains, dislocation networks, and nano-sized oxides. In addition, the average grain sizes were measured as 15.66 μm, 12.93 μm, and 5.98 μm on the plane perpendicular to the scanning direction (SD), transverse direction (TD), and building direction (BD), respectively. A compressive test measured outstanding yield strengths (YS) of 778.4 MPa, 766.4 MPa, and 703.5 MPa in the loading axis of SD, TD, and BD, respectively. These outstanding YSs are the result of a combination of fine grain sizes, high dislocation density and nano-sized oxides. In addition, anisotropy in mechanical properties are result from different values of Taylor factor and grain size according to the loading axis. After a compression test, the geometrically necessary dislocation density was found to differ about 2.5 times on each plane parallel to the loading axis in the same macro strain. Based on such findings, the relationship among microstructure, mechanical anisotropy and deformation mechanism are discussed in the present paper. Furthermore, the mechanical properties of SLM-built equiatomic CoCrFeMnNi HEA are predicted by using multiple strengthening mechanisms considering the microstructural characteristics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
About metastable cellular structure in additively manufactured austenitic stainless steels
Kong, D., Dong, C., Wei, S., Ni, X., Zhang, L., Li, R., Wang, L., Man, C., & Li, X. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101804 · Cited by 528
Recent Advances on High‐Entropy Alloys for 3D Printing
Han, C., Fang, Q., Shi, Y., Tor, S. B., Chua, C. K., & Zhou, K. (2020) · Advanced Materials · doi:10.1002/adma.201903855 · Cited by 486
Additive manufacturing of high entropy alloys: A practical review
Ostovari Moghaddam, A., Shaburova, N. A., Samodurova, M. N., Abdollahzadeh, A., & Trofimov, E. A. (2021) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2020.11.029 · Cited by 474
Sing, S. L., Huang, S., Goh, G. D., Goh, G. L., Tey, C. F., Tan, J. H. K., & Yeong, W. Y. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100795 · Cited by 328
Xu, Z., Zhang, H., Du, X., He, Y., Luo, H., Song, G., Mao, L., Zhou, T., & Wang, L. (2020) · Corrosion Science · doi:10.1016/j.corsci.2020.108954 · Cited by 308
Metadata
- Authors
- Kim, Y.-K., Choe, J., & Lee, K.-A.
- Venue
- Journal of Alloys and Compounds
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 805
- Pages
- 680-691
- ISSN
- 0925-8388 (ISSN-L)
- OpenAlex
- W2962650360
- Cited by
- 197
- References
- 0
- FWCI
- 12.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Selective laser melted equiatomic CoCrFeMnNi high-entropy alloy: Microstructure, anisotropic mechanical response, and multiple strengthening mechanism. https://app.cochat.ai/papers/10.1016/j.jallcom.2019.07.106
- The paper
- Kim, Y.-K., Choe, J., & Lee, K.-A. (2019). Selective laser melted equiatomic CoCrFeMnNi high-entropy alloy: Microstructure, anisotropic mechanical response, and multiple strengthening mechanism. Journal of Alloys and Compounds. https://doi.org/10.1016/j.jallcom.2019.07.106
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.