The DOI matches its Crossref record; 87 of the 87 references it cites were found in a registry or an index.
In-situ alloying in laser-based additive manufacturing processes: A critical review
Open accessAbstract
Abstract The growing need to develop cost-effective and efficient alloys requires enhancing the flexibility of the current production methods. Additive manufacturing (AM), as an emerging technology, has re-shaped the manufacturing strategies and largely influenced the industrial production lines. The feedstock, the main concern with regard to the powder-based AM methods, are mostly in the form of pre-alloyed powders. Pre-alloyed powders have a narrow composition range, suffer from limited availability and are expensive, making additive manufacturing of new alloys inflexible and costly. A growing number of works in the literature are dedicated to AM in-situ alloying, i.e. employing pure elemental blends as opposed to pre-alloyed ones for producing samples using additive manufacturing. This strategy gives added flexibility to the AM methods by benefiting from the laser local energy and paves the way towards an on-demand alloy design framework that is proportionate to the growing needs of the industry. This review is intended to shed light on the key components of AM in-situ alloying process, from initial blend preparation to requirements for the final composition homogeneity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.014 · Cited by 2,766
The metallurgy and processing science of metal additive manufacturing
Sames, W. J., List, F. A., Pannala, S., Dehoff, R. R., & Babu, S. S. (2016) · International Materials Reviews · doi:10.1080/09506608.2015.1116649 · Cited by 2,529
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Everton, S. K., Hirsch, M., Stravroulakis, P., Leach, R. K., & Clare, A. T. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.099 · Cited by 1,469
Theory of microstructural development during rapid solidification
Kurz, W., Giovanola, B., & Trivedi, R. (1986) · Acta Metallurgica · doi:10.1016/0001-6160(86)90056-8 · Cited by 1,358
Thompson, S. M., Bian, L., Shamsaei, N., & Yadollahi, A. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.001 · Cited by 1,179
Additive manufacturing of ultrafine-grained high-strength titanium alloys
Zhang, D., Qiu, D., Gibson, M. A., Zheng, Y., Fraser, H. L., StJohn, D. H., & Easton, M. A. (2019) · Nature · doi:10.1038/s41586-019-1783-1 · Cited by 1,127
Cited by
Mostafaei, A., Ghiaasiaan, R., Ho, I.-T., Strayer, S., Chang, K.-C., Shamsaei, N., Shao, S., Paul, S., Yeh, A.-C., Tin, S., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101108 · Cited by 531
Heterostructured stainless steel: Properties, current trends, and future perspectives
Romero-Resendiz, L., El-Tahawy, M., Zhang, T., Rossi, M. C., Marulanda-Cardona, D. M., Yang, T., Amigó-Borrás, V., Huang, Y., Mirzadeh, H., Beyerlein, I. J., et al. (2022) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2022.100691 · Cited by 278
Mukherjee, T., Elmer, J. W., Wei, H. L., Lienert, T. J., Zhang, W., Kou, S., & DebRoy, T. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101153 · Cited by 267
Metadata
- Authors
- Mosallanejad, M. H., Niroumand, B., Aversa, A., & Saboori, A.
- Venue
- Journal of Alloys and Compounds
- Publisher
- Elsevier BV
- Published
- 2021-08
- Volume
- 872
- Pages
- 159567
- ISSN
- 0925-8388 (ISSN-L)
- OpenAlex
- W3137418394
- Cited by
- 271
- References
- 87
- FWCI
- 17.32
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: In-situ alloying in laser-based additive manufacturing processes: A critical review. https://app.cochat.ai/papers/10.1016/j.jallcom.2021.159567
- The paper
- Mosallanejad, M. H., Niroumand, B., Aversa, A., & Saboori, A. (2021). In-situ alloying in laser-based additive manufacturing processes: A critical review. Journal of Alloys and Compounds. https://doi.org/10.1016/j.jallcom.2021.159567
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.