The DOI matches its Crossref record; 87 of the 87 references it cites were found in a registry or an index.
In-situ alloying in laser-based additive manufacturing processes: A critical review
Open accessAbstract
The growing need to develop cost-effective and efficient alloys requires enhancing the flexibility of the current production methods. Additive manufacturing (AM), as an emerging technology, has re-shaped the manufacturing strategies and largely influenced the industrial production lines. The feedstock, the main concern with regard to the powder-based AM methods, are mostly in the form of pre-alloyed powders. Pre-alloyed powders have a narrow composition range, suffer from limited availability and are expensive, making additive manufacturing of new alloys inflexible and costly. A growing number of works in the literature are dedicated to AM in-situ alloying, i.e. employing pure elemental blends as opposed to pre-alloyed ones for producing samples using additive manufacturing. This strategy gives added flexibility to the AM methods by benefiting from the laser local energy and paves the way towards an on-demand alloy design framework that is proportionate to the growing needs of the industry. This review is intended to shed light on the key components of AM in-situ alloying process, from initial blend preparation to requirements for the final composition homogeneity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.014 · Cited by 2,766
The metallurgy and processing science of metal additive manufacturing
Sames, W. J., List, F. A., Pannala, S., Dehoff, R. R., & Babu, S. S. (2016) · International Materials Reviews · doi:10.1080/09506608.2015.1116649 · Cited by 2,529
Theory of microstructural development during rapid solidification
Kurz, W., Giovanola, B., & Trivedi, R. (1986) · Acta Metallurgica · doi:10.1016/0001-6160(86)90056-8 · Cited by 1,491
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Everton, S. K., Hirsch, M., Stravroulakis, P., Leach, R. K., & Clare, A. T. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.099 · Cited by 1,469
Thompson, S. M., Bian, L., Shamsaei, N., & Yadollahi, A. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.001 · Cited by 1,179
Additive manufacturing of ultrafine-grained high-strength titanium alloys
Zhang, D., Qiu, D., Gibson, M. A., Zheng, Y., Fraser, H. L., StJohn, D. H., & Easton, M. A. (2019) · Nature · doi:10.1038/s41586-019-1783-1 · Cited by 1,127
Shamsaei, N., Yadollahi, A., Bian, L., & Thompson, S. M. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.002 · Cited by 1,108
Model for solute redistribution during rapid solidification
Aziz, M. J. (1982) · Journal of Applied Physics · doi:10.1063/1.329867 · Cited by 1,094
Gorsse, S., Hutchinson, C., Gouné, M., & Banerjee, R. (2017) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2017.1361305 · Cited by 920
Fabrication of NiTi through additive manufacturing: A review
Elahinia, M., Shayesteh Moghaddam, N., Taheri Andani, M., Amerinatanzi, A., Bimber, B. A., & Hamilton, R. F. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2016.08.001 · Cited by 890
Buchanan, C., & Gardner, L. (2019) · Engineering Structures · doi:10.1016/j.engstruct.2018.11.045 · Cited by 826
The global flood protection savings provided by coral reefs
Beck, M. W., Losada, I. J., Menéndez, P., Reguero, B. G., Díaz-Simal, P., & Fernández, F. (2018) · Nature Communications · doi:10.1038/s41467-018-04568-z · Cited by 786
Progress in additive manufacturing on new materials: A review
Li, N., Huang, S., Zhang, G., Qin, R., Liu, W., Xiong, H., Shi, G., & Blackburn, J. (2019) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2018.09.002 · Cited by 776
Theory of Microstructural Development During Rapid Solidification
Trivedi, R., & Kurz, W. (1986) · Springer eBooks · doi:10.1007/978-94-009-4456-5_24 · Cited by 704
On the heat of formation of solid alloys
Miedema, A. R., Boom, R., & De Boer, F. R. (1975) · Journal of the Less Common Metals · doi:10.1016/0022-5088(75)90034-x · Cited by 699
Sun, Z., Tan, X., Tor, S. B., & Chua, C. K. (2018) · NPG Asia Materials · doi:10.1038/s41427-018-0018-5 · Cited by 627
Application of Directed Energy Deposition-Based Additive Manufacturing in Repair
Saboori, A., Aversa, A., Marchese, G., Biamino, S., Lombardi, M., & Fino, P. (2019) · Applied Sciences · doi:10.3390/app9163316 · Cited by 537
Self-citationCloots, M., Uggowitzer, P. J., & Wegener, K. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.10.027 · Cited by 492
Microstructural Control of Additively Manufactured Metallic Materials
Collins, P. C., Brice, D. A., Samimi, P., Ghamarian, I., & Fraser, H. L. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031816 · Cited by 461
Olakanmi, E. O. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.03.009 · Cited by 418
Sing, S. L., Yeong, W. Y., & Wiria, F. E. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.11.141 · Cited by 414
Scipioni Bertoli, U., Guss, G., Wu, S., Matthews, M. J., & Schoenung, J. M. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.09.044 · Cited by 412
The Additive Manufacturing (AM) of titanium alloys
Dutta, B., & Froes, F. H. (. (2017) · Metal Powder Report · doi:10.1016/j.mprp.2016.12.062 · Cited by 400
Effect of real-time cooling rate on microstructure in Laser Additive Manufacturing
Farshidianfar, M. H., Khajepour, A., & Gerlich, A. P. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.01.017 · Cited by 376
Epitaxy and Microstructure Evolution in Metal Additive Manufacturing
Basak, A., & Das, S. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031728 · Cited by 363
Brika, S. E., Letenneur, M., Dion, C. A., & Brailovski, V. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2019.100929 · Cited by 343
Characterization and Control of Powder Properties for Additive Manufacturing
Strondl, A., Lyckfeldt, O., Brodin, H., & Ackelid, U. (2015) · JOM · doi:10.1007/s11837-015-1304-0 · Cited by 340
Borkar, T., Gwalani, B., Choudhuri, D., Mikler, C. V., Yannetta, C. J., Chen, X., Ramanujan, R. V., Styles, M. J., Gibson, M. A., & Banerjee, R. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.06.025 · Cited by 322
Wang, R., Zhang, K., Davies, C., & Wu, X. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.10.138 · Cited by 306
Fischer, M., Joguet, D., Robin, G., Peltier, L., & Laheurte, P. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.02.033 · Cited by 295
New Aluminum Alloys Specifically Designed for Laser Powder Bed Fusion: A Review
Aversa, A., Marchese, G., Saboori, A., Bassini, E., Manfredi, D., Biamino, S., Ugues, D., Fino, P., & Lombardi, M. (2019) · Materials · doi:10.3390/ma12071007 · Cited by 293
Self-citationAdditive manufacturing of magnesium alloys
Karunakaran, R., Ortgies, S., Tamayol, A., Bobaru, F., & Sealy, M. P. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2019.12.004 · Cited by 278
Saboori, A., Aversa, A., Marchese, G., Biamino, S., Lombardi, M., & Fino, P. (2020) · Applied Sciences · doi:10.3390/app10093310 · Cited by 275
Self-citationAdditive manufacturing of magnetic materials
Chaudhary, V., Mantri, S. A., Ramanujan, R. V., & Banerjee, R. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100688 · Cited by 275
Kunce, I., Polanski, M., & Bystrzycki, J. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.02.067 · Cited by 272
Peritectic titanium alloys for 3D printing
Barriobero-Vila, P., Gussone, J., Stark, A., Schell, N., Haubrich, J., & Requena, G. (2018) · Nature Communications · doi:10.1038/s41467-018-05819-9 · Cited by 257
Additive manufacturing of NiTi shape memory alloys using pre-mixed powders
Wang, C., Tan, X. P., Du, Z., Chandra, S., Sun, Z., Lim, C. W. J., Tor, S. B., Lim, C. S., & Wong, C. H. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2019.03.025 · Cited by 245
Averardi, A., Cola, C., Zeltmann, S. E., & Gupta, N. (2020) · Materials Today Communications · doi:10.1016/j.mtcomm.2020.100964 · Cited by 221
Laser deposition of compositionally graded titanium–vanadium and titanium–molybdenum alloys
Collins, P. C., Banerjee, R., Banerjee, S., & Fraser, H. L. (2003) · Materials Science and Engineering A · doi:10.1016/s0921-5093(02)00909-7 · Cited by 214
Le, T.-N., & Lo, Y.-L. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107866 · Cited by 213
Wang, J. C., Liu, Y. J., Qin, P., Liang, S. X., Sercombe, T. B., & Zhang, L. C. (2019) · Materials Science and Engineering: A · doi:10.1016/j.msea.2019.06.001 · Cited by 208
Wang, Q., Han, C., Choma, T., Wei, Q., Yan, C., Song, B., & Shi, Y. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.04.026 · Cited by 194
Recent developments in metal additive manufacturing
Bandyopadhyay, A., Zhang, Y., & Bose, S. (2020) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2020.03.001 · Cited by 175
Huang, S., Narayan, R. L., Tan, H. K. J., Sing, S. L., & Yeong, W. Y. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.116522 · Cited by 174
Vora, P., Mumtaz, K., Todd, I., & Hopkinson, N. (2015) · Additive manufacturing · doi:10.1016/j.addma.2015.06.003 · Cited by 173
Huang, S., Sing, S. L., de Looze, G., Wilson, R., & Yeong, W. Y. (2020) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2020.103775 · Cited by 166
Sing, S. L., Wiria, F. E., & Yeong, W. Y. (2018) · International Journal of Refractory Metals and Hard Materials · doi:10.1016/j.ijrmhm.2018.08.006 · Cited by 163
In-situ high-speed X-ray imaging of piezo-driven directed energy deposition additive manufacturing
Wolff, S. J., Wu, H., Parab, N. D., Zhao, C., Ehmann, K. F., Sun, T., & Cao, J. (2019) · Scientific Reports · doi:10.1038/s41598-018-36678-5 · Cited by 157
Shiva, S., Palani, I. A., Mishra, S. K., Paul, C. P., & Kukreja, L. M. (2014) · Optics & Laser Technology · doi:10.1016/j.optlastec.2014.12.014 · Cited by 156
Zhao, D., Han, C., Li, Y., Li, J., Zhou, K., Wei, Q., Liu, J., & Shi, Y. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.06.307 · Cited by 154
Wang, D., Wang, Z., Li, K., Ma, J., Liu, W., & Shen, Z. J. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.12.010 · Cited by 150
Borkar, T., Chaudhary, V., Gwalani, B., Choudhuri, D., Mikler, C. V., Soni, V., Alam, T., Ramanujan, R. V., & Banerjee, R. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201700048 · Cited by 148
Nagase, T., Hori, T., Todai, M., Sun, S., & Nakano, T. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107771 · Cited by 146
Hamilton, R. F., Bimber, B. A., Andani, M. T., & Elahinia, M. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.06.027 · Cited by 145
Bimber, B. A., Hamilton, R. F., Keist, J. S., & Palmer, T. A. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.07.059 · Cited by 141
Simonelli, M., Aboulkhair, N. T., Cohen, P., Murray, J. W., Clare, A. T., Tuck, C. J., & Hague, R. (2018) · Materials Characterization · doi:10.1016/j.matchar.2018.05.039 · Cited by 132
Improved Corrosion Resistance on Selective Laser Melting Produced Ti-5Cu Alloy after Heat Treatment
Qin, P., Liu, Y., Sercombe, T. B., Li, Y., Zhang, C., Cao, C., Sun, H., & Zhang, L. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00319 · Cited by 128
Halani, P. R., Kaya, İ., Shin, Y. C., & Karaca, H. E. (2012) · Materials Science and Engineering A · doi:10.1016/j.msea.2012.09.031 · Cited by 124
Zhang, B., Chen, J., & Coddet, C. (2013) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2013.05.006 · Cited by 122
Guercio, G. D., Galati, M., Saboori, A., Fino, P., & Iuliano, L. (2020) · Acta Metallurgica Sinica (English Letters) · doi:10.1007/s40195-020-00998-1 · Cited by 121
Self-citationАнатольевич, П. И., Sufiiarov, V. S., Popovich, A., Masailo, D., & Grigoriev, A. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.05.325 · Cited by 117
Studies of magnetic properties of permalloy (Fe–30%Ni) prepared by SLM technology
Zhang, B., Fenineche, N., Zhu, L., Liao, H., & Coddet, C. (2011) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2011.08.030 · Cited by 116
In-situ synthesis of Ti2AlNb-based intermetallic alloy by selective laser melting
Grigoriev, A., Анатольевич, П. И., Sufiiarov, V. S., & Popovich, A. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.02.086 · Cited by 113
Mechanochemical synthesis of nano TiC powder by mechanical milling of titanium and graphite powders
Rahaei, M. B., Rad, R. Y., Kazemzadeh, A., & Ebadzadeh, T. (2011) · Powder Technology · doi:10.1016/j.powtec.2011.10.050 · Cited by 111
Wang, P., Deng, L., Prashanth, K. G., Pauly, S., Eckert, J., & Scudino, S. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.10.168 · Cited by 111
Microstructures and Grain Refinement of Additive-Manufactured Ti-xW Alloys
Mendoza, M. Y., Samimi, P., Brice, D. A., Martin, B. W., Rolchigo, M., LeSar, R. A., & Collins, P. C. (2017) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-017-4117-7 · Cited by 110
Remelt processing and microstructure of selective laser melted Ti25Ta
Brodie, E. G., Medvedev, A. E., Frith, J. E., Dargusch, M. S., Fraser, H. L., & Molotnikov, A. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.153082 · Cited by 109
Hamilton, R. F., Bimber, B. A., & Palmer, T. A. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.12.270 · Cited by 108
Zhuravleva, K., Bönisch, M., Prashanth, K. G., Hempel, U., Helth, A., Gemming, T., Calin, M., Scudino, S., Schultz, L., Eckert, J., et al. (2013) · Materials · doi:10.3390/ma6125700 · Cited by 100
Hamilton, R. F., Palmer, T. A., & Bimber, B. A. (2015) · Scripta Materialia · doi:10.1016/j.scriptamat.2015.01.018 · Cited by 98
Titanium Alloys Manufactured by In Situ Alloying During Laser Powder Bed Fusion
Yadroitsev, I. A., Krakhmalev, P., & Yadroitsava, I. (2017) · JOM · doi:10.1007/s11837-017-2600-7 · Cited by 86
Li, W., Chen, X., Yan, L., Zhang, J., Zhang, X., & Liou, F. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1302-1 · Cited by 86
In-situ reactive processing of nickel aluminides by laser-engineered net shaping
Liu, W., & DuPont, J. N. (2003) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-003-0022-3 · Cited by 74
Microstructure and tensile properties of Ti-Mo alloys manufactured via using laser powder bed fusion
Kang, N., Li, Y., Lin, X., Feng, E., & Huang, W. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.09.008 · Cited by 73
In situ alloying of elemental Al-Cu12 feedstock using selective laser melting
Martinez, R., Todd, I., & Mumtaz, K. (2019) · Virtual and Physical Prototyping · doi:10.1080/17452759.2019.1584402 · Cited by 64
Titanium alloyed with rhenium by selective laser melting
Chlebus, E., Kuźnicka, B., Dziedzic, R., & Kurzynowski, T. (2014) · Materials Science and Engineering A · doi:10.1016/j.msea.2014.10.021 · Cited by 62
Kang, N., Coddet, P., Ammar, M. R., Liao, H., & Coddet, C. (2017) · Materials Characterization · doi:10.1016/j.matchar.2017.06.026 · Cited by 54
Garboczi, E. J., & Hrabe, N. W. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100965 · Cited by 54
Remembrance of things practiced with fast and slow learning in cortical and subcortical pathways
Murray, J. M., & Escola, G. S. (2020) · Nature Communications · doi:10.1038/s41467-020-19788-5 · Cited by 51
Production of NiTi alloy by direct metal deposition of mechanically alloyed powder mixtures
Khademzadeh, S., Parvin, N., & Bariani, P. F. (2015) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-015-0300-1 · Cited by 49
Laser additive processing of Fe-Si-B-Cu-Nb magnetic alloys
Conteri, R., Borkar, T., Nag, S., Jaeger, D. L., Chen, X., Ramanujan, R. V., & Banerjee, R. (2017) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2017.07.029 · Cited by 29
Samimi, P., Liu, Y., Ghamarian, I., Brice, D. A., & Collins, P. C. (2015) · Corrosion Science · doi:10.1016/j.corsci.2015.05.002 · Cited by 22
Khademzadeh, S., Parvin, N., Bariani, P. F., & Mazzucato, F. (2015) · Metals and Materials International · doi:10.1007/s12540-015-5304-y · Cited by 20
Cited by
Mostafaei, A., Ghiaasiaan, R., Ho, I.-T., Strayer, S., Chang, K.-C., Shamsaei, N., Shao, S., Paul, S., Yeh, A.-C., Tin, S., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101108 · Cited by 531
Heterostructured stainless steel: Properties, current trends, and future perspectives
Romero-Resendiz, L., El-Tahawy, M., Zhang, T., Rossi, M. C., Marulanda-Cardona, D. M., Yang, T., Amigó-Borrás, V., Huang, Y., Mirzadeh, H., Beyerlein, I. J., et al. (2022) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2022.100691 · Cited by 278
Mukherjee, T., Elmer, J. W., Wei, H. L., Lienert, T. J., Zhang, W., Kou, S., & DebRoy, T. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101153 · Cited by 267
Metadata
- Authors
- Mosallanejad, M. H., Niroumand, B., Aversa, A., & Saboori, A.
- Venue
- Journal of Alloys and Compounds
- Publisher
- Elsevier BV
- Published
- 2021-08
- Volume
- 872
- Pages
- 159567
- ISSN
- 0925-8388 (ISSN-L)
- OpenAlex
- W3137418394
- Cited by
- 271
- References
- 87
- FWCI
- 17.32
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.