Cited by 415Arsenic contamination and mitigationAdsorption and biosorption for pollutant removalEnvironmental remediation with nanomaterials

Adsorption of arsenate and arsenite on titanium dioxide suspensions

Dutta, Paritam K., Ray, Ajay K., Sharma, Virender K., Millero, Frank J.·2004·Journal of Colloid and Interface Science

Abstract

Adsorption of arsenate (As(V)) and arsenite (As(III)) to two commercially available titanium dioxide (TiO2) suspensions, Hombikat UV100 and Degussa P25, was investigated as a function of pH and initial concentration of adsorbate ions. The BET surface area and zeta potential values of TiO2 were also measured to understand the difference in adsorption behavior of two suspensions. Both As(V) and As(III) adsorb more onto Hombikat UV100 particles than Degussa P25 particles. Adsorption of As(V) onto TiO2 suspensions was more than As(III) at pH 4 while the adsorption capacity of As(III) was more at pH 9. The electrostatic factors between surface charge of TiO2 particles and arsenic species were used to explain adsorption behavior of As(V) and As(III) at different pH. The Langmuir and Freundlich isotherm equations were used to interpret the nature of adsorption of arsenic onto TiO2 suspensions. The usefulness of adsorption data in removing arsenic in water is briefly discussed.

Integrity signals

Registry

Crossref · 10.1016/j.jcis.2004.06.015

Cites

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

  • The reaction is very fast for permanganate, chlorine, and ozone compared to hydrogen peroxide and chloramine when applied for oxidation of AsIII to AsV.

    “The reaction is very fast for permanganate, chlorine, and ozone as compared to hydrogen peroxide and chloramine when applied for oxidation of AsIII to AsV [142–144].”
  • Presence of interfering substances such as Fe(II), Mn(II), sulfide, total organic carbon, and dissolved organic carbon affect the oxidation of AsIII in water samples; in the presence of S2− and TOC, the oxidation rate of AsIII by ozone severely declines.

    “Presence of interfering substances such as Fe(II), Mn(II), sulfide (HS− and S2−), total organic carbon (TOC), and dissolved organic carbon affect the oxidation of AsIII in water samples. In the presence of S2- and TOC, the oxidation rate of AsIII by ozone severely declines [144].”

Cited by

Sorted by citations

Authors
Dutta, P. K., Ray, A. K., Sharma, V. K., & Millero, F. J.
Affiliations
  • National University of Singapore (SG)
  • Florida Institute of Technology (US)
  • University of Miami (US)
Corresponding author
Sharma, Virender K.
Venue
Journal of Colloid and Interface Science
Publisher
Elsevier BV
Published
2004-10
Volume
278
Issue
2
Pages
270-275
ISSN
0021-9797 (ISSN-L)
OpenAlex
W2099757444
Cited by
415
References
0
Citations by year
2026: 4 · 2025: 6 · 2024: 6 · 2023: 12 · 2022: 13 · 2021: 21 · 2020: 29 · 2019: 31 · 2018: 21 · 2017: 28 · 2016: 27 · 2015: 28 · 2014: 27 · 2013: 22 · 2012: 26
FWCI
10.08
Type
journal article
Language
en
Open access
closed
Locations
  • Journal of Colloid and Interface Science (publishedVersion)
  • PubMed (publishedVersion)
  • National University of Singapore (submittedVersion)
Topics
  • Physical Sciences › Environmental Science › Environmental Chemistry › Arsenic contamination and mitigation
  • Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
  • Physical Sciences › Engineering › Biomedical Engineering › Environmental remediation with nanomaterials
Keywords
arsenate adsorption, arsenite adsorption, titanium dioxide, P25 TiO2, pH effect, zeta potential, Langmuir isotherm, Freundlich isotherm, electrostatic interactions, arsenic removal from water, adsorption isotherms

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review