The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Enhanced hydrophobic UiO-66 (University of Oslo 66) metal-organic framework with high capacity and selectivity for toluene capture from high humid air
Abstract
Metal organic frameworks (MOFs) are good absorbents that provide high specific surface area, modified pore surface and controllable pore size. The aim of this work is to prepare a MOFs material with good toluene adsorption property in the presence of water. In this paper, modified UiO-66 (University of Oslo 66) was successfully synthesized with polyvinylpyrrolidone (PVP) as structure-directing agent by a simple solvothermal method. The physical and chemical properties were obtained by a series of characterization instruments. Some missing-linker defect sites were observed on modified materials (defective UiO-66) and were known as the main active sites for toluene adsorption. The defective UiO-66 (PVP-U-0.5, 259 mg g-1) demonstrated 1.7 times toluene adsorption capacity of the pristine UiO-66 (151 mg g-1) when the PVP/Zr4+ ratio was 0.5. The interactions between toluene and UiO-66 and PVP-U-0.5 were assessed through the Henry's law constant (KH) and the isosteric adsorption heat (ΔHads), which indicated that stronger interaction between PVP-U-0.5 and toluene molecules. Moreover, PVP-U-0.5 displayed good adsorption capacity (84 mg g-1) at high relative humidity (70% RH). Water temperature programmed desorption experiments revealed that PVP-U-0.5 had more hydrophobic property, which provided a further possibility for practical application for the removal of toluene.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal-organic frameworks with high capacity and selectivity for harmful gases
Britt, D., Tranchemontagne, D., & Yaghi, O. M. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0804900105 · Cited by 958
Zhang, Y., Chi, H., Zhang, W., Sun, Y., Liang, Q., Gu, Y., & Jing, R. (2014) · Nano-Micro Letters · doi:10.1007/bf03353772 · Cited by 126
Cited by
A review on metal-organic frameworks: Synthesis and applications
Safaei, M., Foroughi, M. M., Ebrahimpoor, N., Jahani, S., Omidi, A., & Khatami, M. (2019) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2019.06.007 · Cited by 943
UiO-66 metal–organic frameworks in water treatment: A critical review
Ahmadijokani, F., Molavi, H., Rezakazemi, M., Tajahmadi, S., Bahi, A., Ko, F., Aminabhavi, T. M., Li, J.-R., & Arjmand, M. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100904 · Cited by 559
Qin, Y., Li, H., Lu, J., Feng, Y., Meng, F., Ma, C., Yan, Y., & Meng, M. (2020) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2020.119254 · Cited by 518
MOF based engineered materials in water remediation: Recent trends
Rego, R. M., Kuriya, G., Kurkuri, M. D., & Kigga, M. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123605 · Cited by 384
Xiang, W., Zhang, Y., Chen, Y., Liu, C.-J., & Tu, X. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta08009h · Cited by 359
Metadata
- Authors
- Zhang, X., Lv, X., Shi, X., Yang, Y., & Yang, Y.
- Venue
- Journal of Colloid and Interface Science
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 539
- Pages
- 152-160
- ISSN
- 0021-9797 (ISSN-L)
- OpenAlex
- W2905387015
- Cited by
- 203
- References
- 2
- FWCI
- 9.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Enhanced hydrophobic UiO-66 (University of Oslo 66) metal-organic framework with high capacity and selectivity for toluene capture from high humid air. https://app.cochat.ai/papers/10.1016/j.jcis.2018.12.056
- The paper
- Zhang, X., Lv, X., Shi, X., Yang, Y., & Yang, Y. (2019). Enhanced hydrophobic UiO-66 (University of Oslo 66) metal-organic framework with high capacity and selectivity for toluene capture from high humid air. Journal of Colloid and Interface Science. https://doi.org/10.1016/j.jcis.2018.12.056
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.