The DOI matches its Crossref record; 233 of the 233 references it cites were found in a registry or an index.
Metrics for optimising the multi-dimensional value of resources recovered from waste in a circular economy: A critical review
Open accessAbstract
Established assessment methods focusing on resource recovery from waste within a circular economy context consider few or even a single domain/s of value, i.e. environmental, economic, social and technical domains. This partial approach often delivers misleading messages for policy- and decision-makers. It fails to accurately represent systems complexity, and obscures impacts, trade-offs and problem shifting that resource recovery processes or systems intended to promote circular economy may cause. Here, we challenge such partial approaches by critically reviewing the existing suite of environmental, economic, social and technical metrics that have been regularly observed and used in waste management and resource recovery systems' assessment studies, upstream and downstream of the point where waste is generated. We assess the potential of those metrics to evaluate ‘complex value’ of materials, components and products, i.e., the holistic sum of their environmental, economic, social and technical benefits and impacts across the system. Findings suggest that the way resource recovery systems are assessed and evaluated require simplicity, yet must retain a suitable minimum level of detail across all domains of value, which is pivotal for enabling sound decision-making processes. Criteria for defining a suitable set of metrics for assessing resource recovery from waste require them to be simple, transparent and easy to measure, and be both system- and stakeholder-specific. Future developments must focus on providing a framework for the selection of metrics that accurately describe (or at least reliably proxy for) benefits and impacts across all domains of value, enabling effective and transparent analysis of resource recovery form waste in circular economy systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Standard methods: For the examination of water and waste water
(1990) · Analytical Biochemistry · doi:10.1016/0003-2697(90)90598-4 · Cited by 72,091
Standard Methods for the Examination of Water and Wastewater
Jenkins, S. H. (1982) · Water Research · doi:10.1016/0043-1354(82)90249-4 · Cited by 30,002
Ghisellini, P., Cialani, C., & Ulgiati, S. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.09.007 · Cited by 6,536
Our Ecological Footprint: reducing human impact on the earth
Bazan, G. (1997) · Electronic Green Journal · doi:10.5070/g31710273 · Cited by 4,654
Recent developments in life cycle assessment
Finnveden, G., Hauschild, M. Z., Ekvall, T., Guinée, J., Heijungs, R., Hellweg, S., Koehler, A., Pennington, D., & Suh, S. (2009) · Journal of Environmental Management · doi:10.1016/j.jenvman.2009.06.018 · Cited by 3,444
Murray, A., Skene, K., & Haynes, K. (2017) · Journal of Business Ethics · doi:10.1007/s10551-015-2693-2 · Cited by 3,328
Vanoli, A. (2010) · SSRN Electronic Journal · doi:10.2139/ssrn.1714428 · Cited by 3,278
Report by the commission on the measurement of economic performance and social progress
Fitoussi, J., Sen, A. K., & Stiglitz, J. E. (2011) · Cited by 2,887
Landfill leachate treatment: Review and opportunity
Renou, S., Givaudan, J. G., Poulain, S., Dirassouyan, F., & Moulin, P. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.09.077 · Cited by 2,591
Recycling and recovery routes of plastic solid waste (PSW): A review
Al-Salem, S. M., Lettieri, P., & Baeyens, J. (2009) · Waste Management · doi:10.1016/j.wasman.2009.06.004 · Cited by 2,404
Research works printed but not linked: 54
- Ashby, 2016, Chapter 14-the vision: a circular materials economy, 211
- Asmala, 2010, Closing a loop: substance flow analysis of nitrogen and phosphorus in the rainbow trout production and domestic consumption system in Finland, Ambio, 39, 126, 10.1007/s13280-010-0024-5 · DOI
- Badran, 2006, Optimization of municipal solid waste management in Port Said – Egypt, Waste Manag., 26, 534, 10.1016/j.wasman.2005.05.005 · doi:10.1016/j.wasman.2005.05.005
- Balkema, 2002, Indicators for the sustainability assessment of wastewater treatment systems, Urban Water, 4, 153, 10.1016/S1462-0758(02)00014-6 · doi:10.1016/s1462-0758(02)00014-6
- Barrett, 2001, The ecological footprint: a metric for corporate sustainability, Corp. Environ. Strategy, 8, 316, 10.1016/S1066-7938(01)00132-4 · doi:10.1016/s1066-7938(01)00132-4
- Baynes, 2011, Comparison of household consumption and regional production approaches to assess urban energy use and implications for policy, Energy Policy, 39, 7298, 10.1016/j.enpol.2011.08.053 · doi:10.1016/j.enpol.2011.08.053
- Bernard, 2005, The measurement of the energy intensity of manufacturing industries: a principal components analysis, Energy Policy, 33, 221, 10.1016/S0301-4215(03)00220-9 · doi:10.1016/s0301-4215(03)00220-9
- Bottero, 2011, Application of the analytic hierarchy process and the analytic network process for the assessment of different wastewater treatment systems, Environ. Model. Softw., 26, 1211, 10.1016/j.envsoft.2011.04.002 · doi:10.1016/j.envsoft.2011.04.002
- Brunner, 1986, Alternative methods for the analysis of municipal solid waste, Waste Manag. Res., 4, 147, 10.1177/0734242X8600400116 · doi:10.1177/0734242x8600400116
- Chalkias, 2009, A GIS based model for the optimisation of municipal solid waste collection: the case study of Nikea, Athens, Greece, WSEAS Trans. Environ. Dev., 1, 11
- Chang, 2008, Combining GIS with fuzzy multicriteria decision-making for landfill siting in a fast-growing urban region, J. Environ. Manag., 87, 139
- Chong, 2016, A lifecycle-based sustainability indicator framework for waste-to-energy systems and a proposed metric of sustainability, Renew. Sustain. Energy Rev., 56, 797, 10.1016/j.rser.2015.11.036 · doi:10.1016/j.rser.2015.11.036
- Choy, 2004, Process design and feasibility study for small scale MSW gasification, Chem. Eng. J., 105, 31, 10.1016/j.cej.2004.07.012 · doi:10.1016/j.cej.2004.07.012
- Daley, 2013, Emergy accounting for assessing the sustainability of wastewater management systems. New York Water Management Association, Inc (NYWEA), Clear Waters Summer, 43
- Eriksson, 2003, How model-based systems analysis can be improved for waste management planning, Waste Manag. Res., 21, 488, 10.1177/0734242X0302100602 · doi:10.1177/0734242x0302100602
- Ertesvåg, 2000, Exergy analysis of the Norwegian society, Energy, 25, 957, 10.1016/S0360-5442(00)00025-6 · doi:10.1016/s0360-5442(00)00025-6
- Esbensen, 2014, Theory of sampling (TOS) versus measurement uncertainty (MU) – a call for integration, TrAC Trends Anal. Chem., 57, 93, 10.1016/j.trac.2014.02.007 · doi:10.1016/j.trac.2014.02.007
- Esbensen, 2014, Why we need the theory of sampling, Anal. Sci., 21, 30
- Esmaili, 1972, Facility selection and haul optimization model, J. Sanit. Eng. Div., 98, 1005, 10.1061/JSEDAI.0001482 · doi:10.1061/jsedai.0001482
- European Union, 2005, Directive 2005/64/EC of the European Parliament and of the Council of 26 October 2005 on the type-approval of motor vehicles with regard to their reusability, recyclability and recoverability and amending Council Directive 70/156/EEC, L 310/10, Off. J. Eur. Union
- European Union, 2008, Directive 2008/98/EC of 19 November 2008 on waste and repealing certain directives (waste framework directive), L312/3 22.11, Off. J. Eur. Union, 3
- Fang, 2015, Product remanufacturability assessment and implementation based on design features, Procedia CIRP, 26, 571, 10.1016/j.procir.2014.07.027 · doi:10.1016/j.procir.2014.07.027
- FAO, 2009, Chapter 4: major impacts of irrigation and drainage projects
- Fuertes, 1974, Solid waste management: equity trade-off models, J. Urban Plan. Dev. Div., 100, 155, 10.1061/JUPDAJ.0000205 · doi:10.1061/jupdaj.0000205
- Gasparatos, 2009, Assessing the sustainability of the UK society using thermodynamic concepts: Part 2, Renew. Sustain. Energy Rev., 13, 956, 10.1016/j.rser.2008.03.005 · doi:10.1016/j.rser.2008.03.005
- Ghose, 2006, A GIS based transportation model for solid waste disposal – a case study on Asansol municipality, Waste Manag., 26, 1287, 10.1016/j.wasman.2005.09.022 · doi:10.1016/j.wasman.2005.09.022
- Graedel, 2003, vol. 7632, 83
- Gu, 2008, Integrated assessment method for building life cycle environmental and economic performance, Build. Simul., 1, 169, 10.1007/s12273-008-8414-3 · DOI
- Keeler, 1994, Haul trash or haul ash: energy recovery as a component of local solid waste management, J. Environ. Econ. Manag., 27, 205, 10.1006/jeem.1994.1034 · doi:10.1006/jeem.1994.1034
- Kondili, 2005, Review of optimization models in the pollution prevention and control, Comput. Aided Chem. Eng., 20, 1627, 10.1016/S1570-7946(05)80113-0 · doi:10.1016/s1570-7946(05)80113-0
- Krogmann, 2000, Selected characteristics of leachate, condensate and runoff released during composting of biogenic waste, Waste Manag. Res., 18, 235, 10.1177/0734242X0001800305 · doi:10.1177/0734242x0001800305
- Leu, 1998, Cost–benefit analysis of resource material recycling, Resour. Conserv. Recycl., 23, 183, 10.1016/S0921-3449(98)00020-2 · doi:10.1016/s0921-3449(98)00020-2
- Liu, 2014, Direct and indirect energy use in China and the United States, Energy, 71, 414, 10.1016/j.energy.2014.04.089 · doi:10.1016/j.energy.2014.04.089
- Longden, 2007, Distributed or centralised energy-from-waste policy? Implications of technology and scale at municipal level, Energy Policy, 35, 2622, 10.1016/j.enpol.2006.09.013 · doi:10.1016/j.enpol.2006.09.013
- Machado, 2001, Energy and carbon embodied in the international trade of Brazil: an input–output approach, Ecol. Econ., 39, 409, 10.1016/S0921-8009(01)00230-0 · doi:10.1016/s0921-8009(01)00230-0
- Mathieux, 2008, ReSICLED: a new recovery-conscious design method for complex products based on a multicriteria assessment of the recoverability, J. Clean. Prod., 16, 277, 10.1016/j.jclepro.2006.07.026 · doi:10.1016/j.jclepro.2006.07.026
- Nuortio, 2006, Improved route planning and scheduling of waste collection and transport, Expert Syst. Appl., 30, 223, 10.1016/j.eswa.2005.07.009 · DOI
- Odum, 1996, Simulation and evaluation with energy systems blocks, Ecol. Model., 93, 155, 10.1016/0304-3800(95)00221-9 · doi:10.1016/0304-3800(95)00221-9
- Powell, 2000, The potential for using life cycle inventory analysis in local authority waste management decision making, J. Environ. Plan. Manag., 43, 351, 10.1080/09640560050010392 · doi:10.1080/09640560050010392
- Saavalainen, 2015, Sustainability assessment of chemical processes: evaluation of three synthesis routes of DMC, J. Chem., 2015, 12
- Schaeffer, 1992, An exergy analysis of the Brazilian economy: from energy production to final energy use, Energy, 17, 841, 10.1016/0360-5442(92)90102-6 · doi:10.1016/0360-5442(92)90102-6
- Schmidt-Bleek, 2008, Factor 10: the future of stuff, Sustain. Sci. Pract. Policy, 4
- Siitonen, 2010, Variables affecting energy efficiency and CO2 emissions in the steel industry, Energy Policy, 38, 2477, 10.1016/j.enpol.2009.12.042 · doi:10.1016/j.enpol.2009.12.042
- Sonesson, 2000, Modelling of waste collection - a general approach to calculate fuel consumption and time, Waste Manag. Res., 18, 115, 10.1177/0734242X0001800203 · doi:10.1177/0734242x0001800203
- Stanisavljevic, 2014, Combination of material flow analysis and substance flow analysis: a powerful approach for decision support in waste management, Waste Manag. Res., 32, 733, 10.1177/0734242X14543552 · doi:10.1177/0734242x14543552
- Steenkamer, 1997, Recycled content in polymer matrix composites through the use of A-glass fibers, Polym. Compos., 18, 300, 10.1002/pc.10283 · doi:10.1002/pc.10283
- Truitt, 1969, Simulation model of urban refuse collection, J. Sanit. Eng. Div., 95, 289, 10.1061/JSEDAI.0000950 · doi:10.1061/jsedai.0000950
- UNEP/WHO, 1996, Chapter 6-field testing methods
- Varouchakis, 2016, Application of Bayesian and cost benefit risk analysis in water resources management, J. Hydrol., 534, 390, 10.1016/j.jhydrol.2016.01.007 · doi:10.1016/j.jhydrol.2016.01.007
- Wall, 1994, Exergy use in the Italian society, Energy, 19, 1267, 10.1016/0360-5442(94)90030-2 · doi:10.1016/0360-5442(94)90030-2
- Wernick, 1995, National material metrics for industrial ecology, Resour. Policy, 21, 189, 10.1016/0301-4207(96)89789-3 · doi:10.1016/0301-4207(96)89789-3
- Wilson, 1977, Strategy evaluation in planning of waste management to land-a critical review of the literature, Appl. Math. Model., 1, 205, 10.1016/0307-904X(77)90007-5 · doi:10.1016/0307-904x(77)90007-5
- Wu, 2002, An economic analysis of biomass gasification and power generation in China, Bioresour. Technol., 83, 65, 10.1016/S0960-8524(01)00116-X · doi:10.1016/s0960-8524(01)00116-x
- Zurbrügg, 2014, How assessment methods can support solid waste management in developing countries—a critical review, Sustainability, 6, 545, 10.3390/su6020545 · doi:10.3390/su6020545
Cited by
Principles for a sustainable circular economy
Velenturf, A. P. M., & Purnell, P. (2021) · Sustainable Production and Consumption · doi:10.1016/j.spc.2021.02.018 · Cited by 1,350
Self-citationCircular economy indicators: What do they measure?
Moraga, G., Huysveld, S., Mathieux, F., Blengini, G. A., Alaerts, L., Van Acker, K., de Meester, S., & Dewulf, J. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.03.045 · Cited by 1,173
A taxonomy of circular economy indicators
Saidani, M., Yannou, B., Leroy, Y., Cluzel, F., & Kendall, A. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.10.014 · Cited by 1,093
Corona, B., Shen, L., Reike, D., Rosales Carreón, J., & Worrell, E. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.104498 · Cited by 987
Bataille, C., Åhman, M., Neuhoff, K., Nilsson, L. J., Fischedick, M., Lechtenböhmer, S., Solano-Rodriquez, B., Denis-Ryan, A., Stiebert, S., Waisman, H., et al. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.107 · Cited by 680
Hahladakis, J. N., & Iacovidou, E. (2018) · Science of The Total Environment · doi:10.1016/j.scitotenv.2018.02.330 · Cited by 417
Self-citationMapping the social dimension of the circular economy
Mies, A., & Gold, S. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.128960 · Cited by 410
Addressing the Social Aspects of a Circular Economy: A Systematic Literature Review
Padilla-Rivera, A., Russo-Garrido, S., & Merveille, N. (2020) · Sustainability · doi:10.3390/su12197912 · Cited by 398
Waste hierarchy index for circular economy in waste management
Pires, A., & Martinho, G. (2019) · Waste Management · doi:10.1016/j.wasman.2019.06.014 · Cited by 358
Black Soldier Fly biowaste treatment – Assessment of global warming potential
Mertenat, A., Diener, S., & Zurbrügg, C. (2019) · Waste Management · doi:10.1016/j.wasman.2018.11.040 · Cited by 342
A systems thinking approach to understanding the challenges of achieving the circular economy
Iacovidou, E., Hahladakis, J. N., & Purnell, P. (2021) · Environmental Science and Pollution Research · doi:10.1007/s11356-020-11725-9 · Cited by 334
Self-citationHahladakis, J. N., & Iacovidou, E. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.120887 · Cited by 307
“Where degradation of plastic material properties occurs, “cascading” is considered the optimal option for recovering plastic material value [11].”
BackgroundSelf-citationIacovidou, E., Millward-Hopkins, J., Busch, J., Purnell, P., Velis, C. A., Hahladakis, J. N., Zwirner, O., & Brown, A. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.09.002 · Cited by 268
Self-citationPackaging design for the circular economy: A systematic review
Zhu, Z., Liu, W., Ye, S., & Batista, L. (2022) · Sustainable Production and Consumption · doi:10.1016/j.spc.2022.06.005 · Cited by 204
Barriers to Implementing the Circular Economy in the Construction Industry: A Critical Review
Charef, R., Morel, J.-C., & Rakhshan, K. (2021) · Sustainability · doi:10.3390/su132312989 · Cited by 188
Circular Economy: A Review of Review Articles
Hossain, M., Park, S., Suchek, N., & Pansera, M. (2024) · Business Strategy and the Environment · doi:10.1002/bse.3867 · Cited by 77
System innovation and life cycle thinking in packaging value chain: the circularity of plastics.
Foschi, E. (2020) · amsdottorato · doi:10.48676/unibo/amsdottorato/9460 · Cited by 2
Metadata
- Authors
- Iacovidou, E., Velis, C. A., Purnell, P., Zwirner, O., Brown, A., Hahladakis, J., Millward-Hopkins, J., & Williams, P. T.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2017-11
- Volume
- 166
- Pages
- 910-938
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2734468618
- Cited by
- 317
- References
- 233
- FWCI
- 27.74
- Type
- journal article
- Language
- en
- Open access
- hybrid
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- creativecommons.org/licenses/by/4.0/ (vor)
- Funders
- UK Natural Environment Research CouncilUK Natural Environment Research Council (NERC)
- UK Economic and Social Research CouncilUK Economic and Social Research Council (ESRC)
- Complex Value Optimisation for Resource Recovery (NE/L014149/1)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.