The DOI matches its Crossref record; 233 of the 233 references it cites were found in a registry or an index.
Metrics for optimising the multi-dimensional value of resources recovered from waste in a circular economy: A critical review
Open accessAbstract
Established assessment methods focusing on resource recovery from waste within a circular economy context consider few or even a single domain/s of value, i.e. environmental, economic, social and technical domains. This partial approach often delivers misleading messages for policy- and decision-makers. It fails to accurately represent systems complexity, and obscures impacts, trade-offs and problem shifting that resource recovery processes or systems intended to promote circular economy may cause. Here, we challenge such partial approaches by critically reviewing the existing suite of environmental, economic, social and technical metrics that have been regularly observed and used in waste management and resource recovery systems' assessment studies, upstream and downstream of the point where waste is generated. We assess the potential of those metrics to evaluate ‘complex value’ of materials, components and products, i.e., the holistic sum of their environmental, economic, social and technical benefits and impacts across the system. Findings suggest that the way resource recovery systems are assessed and evaluated require simplicity, yet must retain a suitable minimum level of detail across all domains of value, which is pivotal for enabling sound decision-making processes. Criteria for defining a suitable set of metrics for assessing resource recovery from waste require them to be simple, transparent and easy to measure, and be both system- and stakeholder-specific. Future developments must focus on providing a framework for the selection of metrics that accurately describe (or at least reliably proxy for) benefits and impacts across all domains of value, enabling effective and transparent analysis of resource recovery form waste in circular economy systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Standard methods: For the examination of water and waste water
(1990) · Analytical Biochemistry · doi:10.1016/0003-2697(90)90598-4 · Cited by 72,091
Standard Methods for the Examination of Water and Wastewater
Jenkins, S. H. (1982) · Water Research · doi:10.1016/0043-1354(82)90249-4 · Cited by 30,002
Ghisellini, P., Cialani, C., & Ulgiati, S. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.09.007 · Cited by 6,536
Our Ecological Footprint: reducing human impact on the earth
Bazan, G. (1997) · Electronic Green Journal · doi:10.5070/g31710273 · Cited by 4,654
Recent developments in life cycle assessment
Finnveden, G., Hauschild, M. Z., Ekvall, T., Guinée, J., Heijungs, R., Hellweg, S., Koehler, A., Pennington, D., & Suh, S. (2009) · Journal of Environmental Management · doi:10.1016/j.jenvman.2009.06.018 · Cited by 3,444
Murray, A., Skene, K., & Haynes, K. (2017) · Journal of Business Ethics · doi:10.1007/s10551-015-2693-2 · Cited by 3,328
Vanoli, A. (2010) · SSRN Electronic Journal · doi:10.2139/ssrn.1714428 · Cited by 3,278
Report by the commission on the measurement of economic performance and social progress
Fitoussi, J., Sen, A. K., & Stiglitz, J. E. (2011) · Cited by 2,887
Landfill leachate treatment: Review and opportunity
Renou, S., Givaudan, J. G., Poulain, S., Dirassouyan, F., & Moulin, P. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.09.077 · Cited by 2,591
Recycling and recovery routes of plastic solid waste (PSW): A review
Al-Salem, S. M., Lettieri, P., & Baeyens, J. (2009) · Waste Management · doi:10.1016/j.wasman.2009.06.004 · Cited by 2,404
(2021) · Thammasat University Digital Collections · doi:10.1016/c2016-0-02067-3 · Cited by 2,293
An overview of sustainability assessment methodologies
Singh, R. K., Murty, H. R., Gupta, S. K., & Dikshit, A. K. (2009) · Ecological Indicators · doi:10.1016/j.ecolind.2008.05.011 · Cited by 2,069
Carbon Footprint of Nations: A Global, Trade-Linked Analysis
Hertwich, E. G., & Peters, G. P. (2009) · Environmental Science & Technology · doi:10.1021/es803496a · Cited by 1,715
Life Cycle Assessment: Past, Present, and Future
Guinée, J. B., Heijungs, R., Huppes, G., Zamagni, A., Masoni, P., Buonamici, R., Ekvall, T., & Rydberg, T. (2011) · Environmental Science & Technology · doi:10.1021/es101316v · Cited by 1,692
Emerging approaches, challenges and opportunities in life cycle assessment
Hellweg, S., & Milà i Canals, L. (2014) · Science · doi:10.1126/science.1248361 · Cited by 1,416
Categorising tools for sustainability assessment
Ness, B., Urbel-Piirsalu, E., Anderberg, S., & Olsson, L. (2007) · Ecological Economics · doi:10.1016/j.ecolecon.2006.07.023 · Cited by 1,407
Nanoparticles – known and unknown health risks
Hoet, P. H., Brüske-Hohlfeld, I., & Salata, O. V. (2004) · Journal of Nanobiotechnology · doi:10.1186/1477-3155-2-12 · Cited by 1,374
The Science and Engineering of Materials
Askeland, D. R. (1991) · Springer eBooks · doi:10.1007/978-94-009-1842-9 · Cited by 1,330
A definition of “carbon footprint”
Wiedmann, T., & Minx, J. C. (2010) · Cited by 1,259
An overview of sustainability assessment methodologies
Singh, R. K., Murty, H. R., Gupta, S. K., & Dikshit, A. K. (2012) · Ecological Indicators · doi:10.1016/j.ecolind.2011.01.007 · Cited by 1,216
Patterson, M. G. (1996) · Energy Policy · doi:10.1016/0301-4215(96)00017-1 · Cited by 1,157
Haas, W., Krausmann, F., Wiedenhofer, D., & Heinz, M. (2015) · Journal of Industrial Ecology · doi:10.1111/jiec.12244 · Cited by 1,154
Brunner, P. H., & Rechberger, H. (2004) · The International Journal of Life Cycle Assessment · doi:10.1007/bf02979426 · Cited by 1,137
Assessing the sustainability performances of industries
Labuschagne, C., Brent, A. C., & van Erck, R. P. G. (2005) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2003.10.007 · Cited by 1,051
Cost-benefit analysis and the environment
(1994) · Choice Reviews Online · doi:10.5860/choice.32-2244 · Cited by 1,041
Humanity’s unsustainable environmental footprint
Hoekstra, A. Y., & Wiedmann, T. O. (2014) · Science · doi:10.1126/science.1248365 · Cited by 1,035
Elkington, J. (2013) · Routledge eBooks · doi:10.4324/9781849773348-1 · Cited by 948
Potential of silver nanoparticle‐coated polyurethane foam as an antibacterial water filter
Jain, P., & Pradeep, T. (2005) · Biotechnology and Bioengineering · doi:10.1002/bit.20368 · Cited by 934
Towards Life Cycle Sustainability Assessment
Finkbeiner, M., Schau, E. M., Lehmann, A., & Traverso, M. (2010) · Sustainability · doi:10.3390/su2103309 · Cited by 915
Metrics to ‘green’ chemistry—which are the best?
Constable, D. J. C., Curzons, A. D., & Cunningham, V. L. (2002) · Green Chem. · doi:10.1039/b206169b · Cited by 910
The Triple Bottom Line: What Is It and How Does It Work?
Slaper, T. F., & Hall, T. J. (2011) · Cited by 840
(2013) · Bankrupting Nature · doi:10.4324/9780203107980-24 · Cited by 811
Bunse, K., Vodicka, M., Schönsleben, P., Brülhart, M., & Ernst, F. O. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2010.11.011 · Cited by 748
Green chemistry and the health implications of nanoparticles
Albrecht, M. A., Evans, C. W., & Raston, C. L. (2006) · Green Chemistry · doi:10.1039/b517131h · Cited by 746
Significance of antibiotics in the environment
Kummerer, K. (2003) · Journal of Antimicrobial Chemotherapy · doi:10.1093/jac/dkg293 · Cited by 745
Review of LCA studies of solid waste management systems – Part I: Lessons learned and perspectives
Laurent, A., Bakas, I., Clavreul, J., Bernstad, A., Niero, M., Gentil, E., Hauschild, M. Z., & Christensen, T. H. (2014) · Waste Management · doi:10.1016/j.wasman.2013.10.045 · Cited by 744
Interrogating the circular economy: The moral economy of resource recovery in the EU
Gregson, N., Crang, M., Fuller, S., & Holmes, H. (2015) · Economy and Society · doi:10.1080/03085147.2015.1013353 · Cited by 743
Supply chain sustainability: A risk management approach
Giannakis, M., & Papadopoulos, T. (2016) · International Journal of Production Economics · doi:10.1016/j.ijpe.2015.06.032 · Cited by 733
From green to sustainability: Information Technology and an integrated sustainability framework
Dao, V., Langella, I., & Carbo, J. (2011) · The Journal of Strategic Information Systems · doi:10.1016/j.jsis.2011.01.002 · Cited by 692
Responsible Leadership and Corporate Social Responsibility:
Székely, F., & Knirsch, M. (2005) · European Management Journal · doi:10.1016/j.emj.2005.10.009 · Cited by 689
Cherubini, F., Bargigli, S., & Ulgiati, S. (2009) · Energy · doi:10.1016/j.energy.2008.08.023 · Cited by 666
Economic valuation and the commodification of ecosystem services
Gómez-Baggethun, E., & Ruiz-Pérez, M. (2011) · Progress in Physical Geography: Earth and Environment · doi:10.1177/0309133311421708 · Cited by 666
CHERUBINI, F., PETERS, G. P., BERNTSEN, T., STRØMMAN, A. H., & HERTWICH, E. (2011) · GCB Bioenergy · doi:10.1111/j.1757-1707.2011.01102.x · Cited by 645 · cited 4×
“…of its source, and as such BCe that is released in the atmosphere can also contribute to the global warming effect, measured using a unit-based index called GWPbio or CO2biogenic emissions (Blengini, 2008a; Cherubini et al., 2011; Christensen et al., 2009; Gentil et al., 2009; Parkes et al., 2015).”
BackgroundMethodInfluentialWaste management models and their application to sustainable waste management
Morrissey, A. J., & Browne, J. (2004) · Waste Management · doi:10.1016/j.wasman.2003.09.005 · Cited by 637
Bejan, A. (2002) · International Journal of Energy Research · doi:10.1002/er.804 · Cited by 603
Life cycle costing—Theory, information acquisition and application
Woodward, D. G. (1997) · International Journal of Project Management · doi:10.1016/s0263-7863(96)00089-0 · Cited by 587
Boxall, A. B. A. (2004) · EMBO reports · doi:10.1038/sj.embor.7400307 · Cited by 575
Solid waste management in European countries: A review of systems analysis techniques
Pires, A., Martinho, G., & Chang, N.-B. (2011) · Journal of Environmental Management · doi:10.1016/j.jenvman.2010.11.024 · Cited by 573
The Importance of Carbon Footprint Estimation Boundaries
Matthews, H. S., Hendrickson, C. T., & Weber, C. L. (2008) · Environmental Science & Technology · doi:10.1021/es703112w · Cited by 571
Product Environmental Life‐Cycle Assessment Using Input‐Output Techniques
Joshi, S. (1999) · Journal of Industrial Ecology · doi:10.1162/108819899569449 · Cited by 567
Indicators of Sustainable Development for Industry
Azapagic, A., & Perdan, S. (2000) · Process Safety and Environmental Protection · doi:10.1205/095758200530763 · Cited by 567
Monfreda, C., Wackernagel, M., & Deumling, D. (2004) · Land Use Policy · doi:10.1016/j.landusepol.2003.10.009 · Cited by 558
Gluch, P., & Baumann, H. (2004) · Building and Environment · doi:10.1016/j.buildenv.2003.10.008 · Cited by 552
INPUT–OUTPUT ANALYSIS AND CARBON FOOTPRINTING: AN OVERVIEW OF APPLICATIONS
Minx, J. C., Wiedmann, T., Wood, R., Peters, G. P., Lenzen, M., Owen, A., Scott, K., Barrett, J., Hubacek, K., Baiocchi, G., et al. (2009) · Economic Systems Research · doi:10.1080/09535310903541298 · Cited by 542
Global Waste Management Outlook
(2016) · United Nations eBooks · doi:10.18356/765baec0-en · Cited by 526
The science and engineering of materials
Bacon, D. M. C. (1996) · Materials & Design · doi:10.1016/0261-3069(96)83775-7 · Cited by 511
Life cycle assessment and its application to process selection, design and optimisation
Azapagic, A. (1999) · Chemical Engineering Journal · doi:10.1016/s1385-8947(99)00042-x · Cited by 490
Waste-to-energy: A way from renewable energy sources to sustainable development
Kothari, R., Tyagi, V. V., & Pathak, A. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.05.005 · Cited by 489
A Framework for Social Life Cycle Impact Assessment (10 pp)
Dreyer, L., Hauschild, M., & Schierbeck, J. (2006) · The International Journal of Life Cycle Assessment · doi:10.1065/lca2005.08.223 · Cited by 488
Environmental systems analysis tools – an overview
Finnveden, G., & Moberg, Å. (2005) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2004.06.004 · Cited by 466
Energy efficiency—a critical view
Herring, H. (2006) · Energy · doi:10.1016/j.energy.2004.04.055 · Cited by 464
Composting and compost utilization: accounting of greenhouse gases and global warming contributions
Boldrin, A., Andersen, J. K., Møller, J., Christensen, T. H., & Favoino, E. (2009) · Waste Management & Research: The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x09345275 · Cited by 453
Energy from gasification of solid wastes
Belgiorno, V., De Feo, G., Della Rocca, C., & Napoli, R. M. A. (2003) · Waste Management · doi:10.1016/s0956-053x(02)00149-6 · Cited by 452
Municipal solid waste management from a systems perspective
Eriksson, O., Carlsson Reich, M., Frostell, B., Björklund, A., Assefa, G., Sundqvist, J.-O., Granath, J., Baky, A., & Thyselius, L. (2005) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2004.02.018 · Cited by 444
Clarke, S., Fine, B., & Leopold, E. (1994) · Contemporary Sociology · doi:10.2307/2076107 · Cited by 429
Low carbon and low embodied energy materials in buildings: A review
Cabeza, L. F., Barreneche, C., Miró, L., Morera, J. M., Bartolí, E., & Inés Fernández, A. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.03.017 · Cited by 417
Sustainability Metrics: Life Cycle Assessment and Green Design in Polymers
Tabone, M. D., Cregg, J. J., Beckman, E. J., & Landis, A. E. (2010) · Environmental Science & Technology · doi:10.1021/es101640n · Cited by 416
What life-cycle assessment does and does not do in assessments of waste management
Ekvall, T., Assefa, G., Björklund, A., Eriksson, O., & Finnveden, G. (2007) · Waste Management · doi:10.1016/j.wasman.2007.02.015 · Cited by 415
Adopting and applying eco-design techniques: a practitioners perspective
Knight, P., & Jenkins, J. O. (2009) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2008.10.002 · Cited by 411
Pricing the Priceless: Cost-Benefit Analysis of Environmental Protection
Ackerman, F., & Heinzerling, L. (2002) · University of Pennsylvania Law Review · doi:10.2307/3312947 · Cited by 409
Life cycle assessment of energy from solid waste—part 1: general methodology and results
Finnveden, G., Johansson, J., Lind, P., & Moberg, Å. (2005) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2004.02.023 · Cited by 397
Nässén, J., Holmberg, J., Wadeskog, A., & Nyman, M. (2007) · Energy · doi:10.1016/j.energy.2007.01.002 · Cited by 384
Brentner, L. B., Eckelman, M. J., & Zimmerman, J. B. (2011) · Environmental Science & Technology · doi:10.1021/es2006995 · Cited by 377
Design for remanufacture: a literature review and future research needs
Hatcher, G. D., Ijomah, W. L., & Windmill, J. F. C. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.06.019 · Cited by 375
Exergy, power and work in the US economy, 1900–1998
Ayres, R. (2003) · Energy · doi:10.1016/s0360-5442(02)00089-0 · Cited by 365
Carbon footprints and embodied carbon at multiple scales
Peters, G. P. (2010) · Current Opinion in Environmental Sustainability · doi:10.1016/j.cosust.2010.05.004 · Cited by 362
Fang, K., Heijungs, R., & de Snoo, G. R. (2014) · Ecological Indicators · doi:10.1016/j.ecolind.2013.08.017 · Cited by 355
Integrating life cycle cost analysis and LCA
Norris, G. A. (2001) · The International Journal of Life Cycle Assessment · doi:10.1007/bf02977849 · Cited by 349
Lee, K.-H. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.03.010 · Cited by 348
The application of life cycle assessment to process optimisation
Azapagic, A., & Clift, R. (1999) · Computers & Chemical Engineering · doi:10.1016/s0098-1354(99)00308-7 · Cited by 345
Sustainable waste management systems
Seadon, J. K. (2010) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2010.07.009 · Cited by 339
Product life-cycle implications for remanufacturing strategies
Östlin, J., Sundin, E., & Björkman, M. (2009) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2009.02.021 · Cited by 329
Kleywegt, S., Pileggi, V., Yang, P., Hao, C., Zhao, X., Rocks, C., Thach, S., Cheung, P., & Whitehead, B. (2011) · Science of The Total Environment · doi:10.1016/j.scitotenv.2011.01.010 · Cited by 322
A Review of the Ecological Footprint Indicator—Perceptions and Methods
Wiedmann, T., & Barrett, J. (2010) · Sustainability · doi:10.3390/su2061645 · Cited by 321
Life cycle assessment (LCA) applied to the process industry: a review
Jacquemin, L., Pontalier, P.-Y., & Sablayrolles, C. (2012) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-012-0432-9 · Cited by 316
Life-Cycle based methods for sustainable product development
Klöpffer, W. (2003) · The International Journal of Life Cycle Assessment · doi:10.1007/bf02978462 · Cited by 305
Methodological aspects of life cycle assessment of integrated solid waste management systems
Finnveden, G. (1999) · Resources, Conservation and Recycling · doi:10.1016/s0921-3449(99)00005-1 · Cited by 304
Optimisation of MSW collection routes for minimum fuel consumption using 3D GIS modelling
Tavares, G., Zsigraiova, Z., Semiao, V., & Carvalho, M. G. (2009) · Waste Management · doi:10.1016/j.wasman.2008.07.013 · Cited by 301
Arena, U., Mastellone, M. L., & Perugini, F. (2003) · Chemical Engineering Journal · doi:10.1016/j.cej.2003.08.019 · Cited by 298
EDITORIAL: CARBON FOOTPRINT AND INPUT–OUTPUT ANALYSIS – AN INTRODUCTION
Wiedmann, T. (2009) · Economic Systems Research · doi:10.1080/09535310903541256 · Cited by 298
Bernstad, A., & la Cour Jansen, J. (2012) · Waste Management · doi:10.1016/j.wasman.2012.07.023 · Cited by 297
Towards indicators of sustainable development for firms
Callens, I., & Tyteca, D. (1999) · Ecological Economics · doi:10.1016/s0921-8009(98)00035-4 · Cited by 294
Green house gas emissions from composting and mechanical biological treatment
Amlinger, F., Peyr, S., & Cuhls, C. (2008) · Waste Management & Research: The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x07088432 · Cited by 286
‘Wasteaware’ benchmark indicators for integrated sustainable waste management in cities
Wilson, D. C., Rodic, L., Cowing, M. J., Velis, C. A., Whiteman, A. D., Scheinberg, A., Vilches, R., Masterson, D., Stretz, J., & Oelz, B. (2015) · Waste Management · doi:10.1016/j.wasman.2014.10.006 · Cited by 283
Self-citationAssessment methods for solid waste management: A literature review
Allesch, A., & Brunner, P. H. (2014) · Waste Management & Research: The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x14535653 · Cited by 283
Exergy, waste accounting, and life-cycle analysis
Ayres, R. U., Ayres, L. W., & Martinás, K. (1998) · Energy · doi:10.1016/s0360-5442(97)00076-5 · Cited by 275
Carlsson Reich, M. (2005) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2004.02.015 · Cited by 275
Begum, R. A., Siwar, C., Pereira, J. J., & Jaafar, A. H. (2006) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2006.01.004 · Cited by 274
Towards a life cycle sustainability assessment: making informed choices on products
Ciroth, A., Finkbeiner, M., Traverso, M., Hildenbrand, J., Kloepffer, W., Mazijn, B., Prakash, S., Sonnemann, G., Valdivia, S., Ugaya, C. M. L., et al. (2011) · Cited by 272
The Application of Life Cycle Assessment to Integrated Solid Waste Management
Clift, R., Doig, A., & Finnveden, G. (2000) · Process Safety and Environmental Protection · doi:10.1205/095758200530790 · Cited by 268
Iacovidou, E., Millward-Hopkins, J., Busch, J., Purnell, P., Velis, C. A., Hahladakis, J. N., Zwirner, O., & Brown, A. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.09.002 · Cited by 268
Self-citationEstablishing and testing the “reuse potential” indicator for managing wastes as resources
Park, J. Y., & Chertow, M. R. (2014) · Journal of Environmental Management · doi:10.1016/j.jenvman.2013.11.053 · Cited by 262
Remanufacturing and Energy Savings
Gutowski, T. G., Sahni, S., Boustani, A., & Graves, S. C. (2011) · Environmental Science & Technology · doi:10.1021/es102598b · Cited by 260
Energy indicators for tracking sustainability in developing countries
Kemmler, A., & Spreng, D. (2007) · Energy Policy · doi:10.1016/j.enpol.2006.09.006 · Cited by 251
Christensen, T. H., Gentil, E., Boldrin, A., Larsen, A. W., Weidema, B. P., & Hauschild, M. (2009) · Waste Management & Research: The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x08096304 · Cited by 250
Indicators of sustainable production
Krajnc, D., & Glavic, P. (2003) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-003-0221-z · Cited by 243
Exergy - a useful concept within resource accounting
Wall, G. (1977) · KTH Publication Database DiVA (KTH Royal Institute of Technology) · Cited by 229
Exergy conversion in the Japanese society
Wall, G. (1990) · Energy · doi:10.1016/0360-5442(90)90040-9 · Cited by 228
Steel’s recyclability: Demonstrating the benefits of recycling steel to achieve a circular economy
Broadbent, C. (2016) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-016-1081-1 · Cited by 228
Ijomah, W. L., McMahon, C. A., Hammond, G. P., & Newman, S. T. (2007) · International Journal of Production Research · doi:10.1080/00207540701450138 · Cited by 224
Burn or bury? A social cost comparison of final waste disposal methods
Dijkgraaf, E., & Vollebergh, H. R. J. (2004) · Ecological Economics · doi:10.1016/j.ecolecon.2004.03.029 · Cited by 222
Application of life cycle assessment to chemical processes
Burgess, A. A., & Brennan, D. J. (2001) · Chemical Engineering Science · doi:10.1016/s0009-2509(00)00511-x · Cited by 220
Zhang, Y., Baral, A., & Bakshi, B. R. (2010) · Environmental Science & Technology · doi:10.1021/es900548a · Cited by 218
Yuan, H. P., Shen, L. Y., Hao, J. J. L., & Lu, W. S. (2011) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2010.06.004 · Cited by 214
Refining the ecological footprint
Venetoulis, J., & Talberth, J. (2008) · Environment, Development and Sustainability · doi:10.1007/s10668-006-9074-z · Cited by 213
Bovea, M. D., Ibáñez-Forés, V., Gallardo, A., & Colomer-Mendoza, F. J. (2010) · Waste Management · doi:10.1016/j.wasman.2010.03.001 · Cited by 208
Peh, K. S.-H., Balmford, A., Bradbury, R. B., Brown, C., Butchart, S. H. M., Hughes, F. M. R., Stattersfield, A., Thomas, D. H. L., Walpole, M., Bayliss, J., et al. (2013) · Ecosystem Services · doi:10.1016/j.ecoser.2013.06.003 · Cited by 206
Recycling of glass: accounting of greenhouse gases and global warming contributions
Larsen, A. W., Merrild, H., & Christensen, T. H. (2009) · Waste Management & Research: The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x09342148 · Cited by 204
Ristimäki, M., Säynäjoki, A., Heinonen, J., & Junnila, S. (2013) · Energy · doi:10.1016/j.energy.2013.10.030 · Cited by 201
Iacovidou, E., & Purnell, P. (2016) · Science of The Total Environment · doi:10.1016/j.scitotenv.2016.03.098 · Cited by 200
Self-citationVelis, C. A., Wilson, D. C., Rocca, O., Smith, S. R., Mavropoulos, A., & Cheeseman, C. R. (2012) · Waste Management & Research: The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x12454934 · Cited by 198
Self-citationEnergy efficiency measurement in industrial processes
Giacone, E., & Mancò, S. (2011) · Energy · doi:10.1016/j.energy.2011.11.054 · Cited by 194
Fang, K., Heijungs, R., & De Snoo, G. R. (2015) · Ecological Economics · doi:10.1016/j.ecolecon.2015.04.008 · Cited by 190
Incineration Of Hazardous Waste
Oppelt, E. T. (1987) · JAPCA · doi:10.1080/08940630.1987.10466245 · Cited by 189
Exergies of natural resources in life-cycle assessment and other applications
Finnveden, G., & Östlund, P. (1997) · Energy · doi:10.1016/s0360-5442(97)00022-4 · Cited by 187
Use Sustainability Metrics to Guide Decision-Making
Schwarz, J. M., Beloff, B. R., & Beaver, E. R. (2002) · Chemical engineering progress · Cited by 186
Turner, D. A., Williams, I. D., & Kemp, S. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.04.077 · Cited by 183
Toward a computational structure for life cycle sustainability analysis: unifying LCA and LCC
Heijungs, R., Settanni, E., & Guinée, J. (2013) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-012-0461-4 · Cited by 182
LCA-IWM: A decision support tool for sustainability assessment of waste management systems
den Boer, J., den Boer, E., & Jager, J. (2007) · Waste Management · doi:10.1016/j.wasman.2007.02.022 · Cited by 178
Social Life Cycle Assessment Revisited
Wu, R., Yang, D., & Chen, J. (2014) · Sustainability · doi:10.3390/su6074200 · Cited by 173
Comparison of Environmental Implications of Asphalt and Steel-Reinforced Concrete Pavements
Horvath, A., & Hendrickson, C. (1998) · Transportation Research Record: Journal of the Transportation Research Board · doi:10.3141/1626-13 · Cited by 173
LCA of integrated MSW management systems: Case study of the Bologna District
Buttol, P., Masoni, P., Bonoli, A., Goldoni, S., Belladonna, V., & Cavazzuti, C. (2007) · Waste Management · doi:10.1016/j.wasman.2007.02.010 · Cited by 173
Greenhouse gas accounting and waste management
Gentil, E., Christensen, T. H., & Aoustin, E. (2009) · Waste Management & Research: The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x09346702 · Cited by 168
A market-based approach to allocation at open-loop recycling
Ekvall, T. (2000) · Resources, Conservation and Recycling · doi:10.1016/s0921-3449(99)00057-9 · Cited by 164
Huysman, S., Debaveye, S., Schaubroeck, T., Meester, S. D., Ardente, F., Mathieux, F., & Dewulf, J. (2015) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2015.05.014 · Cited by 164
Social acceptance for the development of a waste-to-energy plant in an urban area
Achillas, C., Vlachokostas, C., MOUSSIOPOULOS, N., Banias, G., Kafetzopoulos, G., & Karagiannidis, A. (2011) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2011.04.012 · Cited by 163
Characterizing the Remanufacturability of Engineering Systems
Amezquita, T., Hammond, R., Salazar, M., & Bras, B. (1995) · Volume 1: 21st Design Automation Conference · doi:10.1115/detc1995-0036 · Cited by 162
Life cycle assessment of resource recovery from municipal solid waste incineration bottom ash
Allegrini, E., Vadenbo, C., Boldrin, A., & Astrup, T. F. (2015) · Journal of Environmental Management · doi:10.1016/j.jenvman.2014.11.032 · Cited by 161
Stocks and flows of nitrogen and phosphorus in the Finnish food production and consumption system
Antikainen, R., Lemola, R., Nousiainen, J. I., Sokka, L. I., Esala, M., Huhtanen, P. J., & Rekolainen, S. (2004) · Agriculture Ecosystems & Environment · doi:10.1016/j.agee.2004.10.025 · Cited by 161
Integrated life-cycle and risk assessment for industrial processes
Sonnemann, G., Castells, F., Schuhmacher, M., & Hauschild, M. Z. (2004) · The International Journal of Life Cycle Assessment · doi:10.1007/bf02994195 · Cited by 158
Fugitive methane emissions from an agricultural biodigester
Flesch, T. K., Desjardins, R. L., & Worth, D. E. (2011) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.06.009 · Cited by 157
Assessing impacts: Overview on sustainability indicators and metrics
Tanzil, D., & Beloff, B. R. (2006) · Environmental Quality Management · doi:10.1002/tqem.20101 · Cited by 154
Remanufacturing : the experience of the United States and implications for developing countries
Lund, R. T. (1985) · Cited by 153
Polymers, the Environment and Sustainable Development
Azapagic, A., Emsley, A., & Hamerton, L. (2003) · Wiley eBooks · doi:10.1002/0470865172 · Cited by 149
Allacker, K., Mathieux, F., Manfredi, S., Pelletier, N. L., Camillis, C. D., Ardente, F., & Pant, R. (2014) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2014.03.016 · Cited by 145
Finkbeiner, M. (2013) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-013-0678-x · Cited by 143
Recycling of plastic: accounting of greenhouse gases and global warming contributions
Astrup, T. F., Fruergaard, T., & Christensen, T. H. (2009) · Waste Management & Research The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x09345868 · Cited by 141
Giugliano, M., Cernuschi, S., Grosso, M., & Rigamonti, L. (2011) · Waste Management · doi:10.1016/j.wasman.2011.02.029 · Cited by 135
Iacovidou, E., Purnell, P., & Lim, M. K. (2017) · Journal of Environmental Management · doi:10.1016/j.jenvman.2017.04.093 · Cited by 133
Self-citationDeclaration by the Metals Industry on Recycling Principles
Atherton, J. (2006) · The International Journal of Life Cycle Assessment · doi:10.1065/lca2006.11.283 · Cited by 131
How to account for CO2 emissions from biomass in an LCA
Rabl, A., Benoist, A., Dron, D., Peuportier, B., Spadaro, J. V., & Zoughaïb, A. (2007) · The International Journal of Life Cycle Assessment · doi:10.1065/lca2007.06.347 · Cited by 131
Recycling of plastics in Germany
Patel, M. K., von Thienen, N., Jochem, E., & Worrell, E. (2000) · Resources Conservation and Recycling · doi:10.1016/s0921-3449(99)00058-0 · Cited by 130
Blengini, G. A. (2008) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2008.08.002 · Cited by 125
Quantifying the quality loss and resource efficiency of recycling by means of exergy analysis
Amini, S., Remmerswaal, J. A. M., Castro, M. B. G., & Reuter, M. A. (2006) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2006.01.010 · Cited by 125
Identification of key assessment indicators of the zero waste management systems
Zaman, A. U. (2014) · Ecological Indicators · doi:10.1016/j.ecolind.2013.09.024 · Cited by 124
Life cycle sustainability assessment of RC buildings in seismic regions
Gencturk, B., Hossain, K. A., & Lahourpour, S. (2015) · Engineering Structures · doi:10.1016/j.engstruct.2015.11.037 · Cited by 123
Iacovidou, E., Hahladakis, J. Ν., Deans, I., Velis, C. A., & Purnell, P. (2017) · Waste Management · doi:10.1016/j.wasman.2017.07.001 · Cited by 121
Self-citationEconomic Input-output Life-cycle Assessment of U.S. Residential Buildings
Ochoa, L., Hendrickson, C. T., & Matthews, H. S. (2002) · Journal of Infrastructure Systems · doi:10.1061/(asce)1076-0342(2002)8:4(132 · Cited by 119
A holistic approach for decision on selection of end-of-life products recovery options
Ziout, A., Azab, A., & Atwan, M. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.10.001 · Cited by 115
Giampietro, M., & Saltelli, A. (2014) · Ecological Indicators · doi:10.1016/j.ecolind.2014.01.030 · Cited by 112
Robotis, A., Boyacı, T., & Verter, V. (2012) · International Journal of Production Economics · doi:10.1016/j.ijpe.2012.04.017 · Cited by 108
Alternative scenarios to meet the demands of sustainable waste management
Bovea, M. D., & Powell, J. C. (2005) · Journal of Environmental Management · doi:10.1016/j.jenvman.2005.06.005 · Cited by 107
Greenhouse Gas Protocol Product Life Cycle Accounting and Reporting Standard
Bhatia, P., Cummis, C. E., Draucker, L., Rich, D., Lahd, H., & Brown, A. (2011) · Cited by 107
Self-citationInternational Energy Agency (2004) · OECD eBooks · doi:10.1787/9789264033986-en · Cited by 107
Ardente, F., & Mathieux, F. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.07.058 · Cited by 105
Abduli, M. A., Naghib, A., Yonesi, M., & Akbari, A. (2010) · Environmental Monitoring and Assessment · doi:10.1007/s10661-010-1707-x · Cited by 105
Waste to energy conversion technology
Klinghoffer, N. B., & Castaldi, M. J. (2013) · Woodhead Publishing Limited eBooks · doi:10.1533/9780857096364 · Cited by 103
Kirkeby, J., Birgisdóttir, H., Hansen, T. L., Christensen, T. H., Bhander, G. S., & Hauschild, M. Z. (2006) · Waste Management & Research The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x06062598 · Cited by 99
The use, non-use and misuse of indicators in sustainability assessment and communication
Lyytimäki, J. M., Tapio, P., Varho, V., & Söderman, T. (2013) · International Journal of Sustainable Development & World Ecology · doi:10.1080/13504509.2013.834524 · Cited by 97
Kikuchi, R., & Gerardo, R. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.07.062 · Cited by 97
Material Nature versus Structural Nurture: The Embodied Carbon of Fundamental Structural Elements
Purnell, P. (2011) · Environmental Science & Technology · doi:10.1021/es202190r · Cited by 97
Self-citationSchulz, N. B. (2009) · Energy Policy · doi:10.1016/j.enpol.2009.08.066 · Cited by 96
Resource Efficiency in the Building Sector
Dosch, K. (2017) · Eco-efficiency in industry and science · doi:10.1007/978-3-319-50079-9_19 · Cited by 96
Parkes, O., Lettieri, P., & Bogle, I. D. L. (2015) · Waste Management · doi:10.1016/j.wasman.2015.03.017 · Cited by 95
Proposal for new quantitative eco-design indicators: a first case study
Cerdán, C. R., Gazulla, C., Raugei, M., Martinez, E., & Fullana–i–Palmer, P. (2009) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2009.07.010 · Cited by 93
Valuing temporary carbon storage
Levasseur, A., Brandão, M., Lesage, P., Margni, M. D., David, P., Clift, R., & Samson, R. (2011) · Nature Climate Change · doi:10.1038/nclimate1335 · Cited by 93
Reddy, B. S., & Ray, B. K. (2011) · Energy Policy · doi:10.1016/j.enpol.2011.08.044 · Cited by 89
Integrating design for remanufacture into the design process: the operational factors
Hatcher, G. D., Ijomah, W., & Windmill, J. F. C. (2012) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.08.015 · Cited by 88
Ferrão, P., Ribeiro, P. F., Rodrigues, J. F. D., Marques, A., Preto, M. T., Amaral, M., Domingos, T., Lopes, A., & Costa, E. I. (2013) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2013.10.020 · Cited by 85
Circular economy and global secondary material supply chains
Velis, C. A. (2015) · Waste Management & Research The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x15587641 · Cited by 84
Self-citationNew gross energy-requirement figures for materials production
Worrell, E., van Heijningen, R. J. J., de Castro, J. F. M., Hazewinkel, J. H. O., de Beer, J. G., Faaij, A. P. C., & Vringer, K. (1994) · Energy · doi:10.1016/0360-5442(94)90003-5 · Cited by 81
Farel, R., Yannou, B., Ghaffari, A., & Leroy, Y. (2013) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2013.02.013 · Cited by 80
Djukic, M., Jovanoski, I., Ivanović, O. M., Lazić, M., & Bodroža, D. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.01.050 · Cited by 80
Minimax regret optimization analysis for a regional solid waste management system
Chang, N., & Davila, E. (2006) · Waste Management · doi:10.1016/j.wasman.2006.05.002 · Cited by 79
Blengini, G. A., Fantoni, M., Busto, M., Genon, G., & Zanetti, M. (2012) · Waste Management · doi:10.1016/j.wasman.2012.04.010 · Cited by 78
Dewulf, J. P., & Langenhove, H. R. V. (2002) · Environmental Science & Technology · doi:10.1021/es010140o · Cited by 76
Integrated solid waste management in Urban India: A critical operational research framework
Sudhir, V., Muraleedharan, V. R., & Srinivasan, G. (1996) · Socio-Economic Planning Sciences · doi:10.1016/0038-0121(96)00012-2 · Cited by 71
Greenhouse gases, radiative forcing, global warming potential and waste management — an introduction
Scheutz, C., Kjeldsen, P., & Gentil, E. (2009) · Waste Management & Research The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x09345599 · Cited by 70
Evaluating a municipal waste management plan using orware
Björklund, A., Dalemo, M., & Sonesson, U. (1999) · Journal of Cleaner Production · doi:10.1016/s0959-6526(99)00086-4 · Cited by 68
Fatal and major construction accidents: A comparison between Scotland and the rest of Great Britain
Cameron, I., Hare, B., & Davies, R. (2007) · Safety Science · doi:10.1016/j.ssci.2007.06.007 · Cited by 66
Performance analysis of the closed loop supply chain
Asif, F. M. A., Bianchi, C., Rashid, A., & Nicolescu, C. M. (2012) · Journal of remanufacturing · doi:10.1186/2210-4690-2-4 · Cited by 64
Product environmental footprint in policy and market decisions: Applicability and impact assessment
Lehmann, A., Bach, V., & Finkbeiner, M. (2015) · Integrated Environmental Assessment and Management · doi:10.1002/ieam.1658 · Cited by 62
Ulgiati, S., Ascione, M., Bargigli, S., Cherubini, F., Franzese, P. P., Raugei, M., Viglia, S., & Zucaro, A. (2010) · Ecological Modelling · doi:10.1016/j.ecolmodel.2010.09.005 · Cited by 61
Perkoulidis, G., Papageorgiou, A., Karagiannidis, A., & Kalogirou, S. A. (2010) · Waste Management · doi:10.1016/j.wasman.2009.11.021 · Cited by 58
The role of policy labels, keywords and framing in transitioning waste policy
Silva, A., Stocker, L. J., Mercieca, P., & Rosano, M. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.12.069 · Cited by 58
Allocation in recycling systems
Vogtlander, J. G., Brezet, H. C., & Hendriks, C. F. (2001) · The International Journal of Life Cycle Assessment · doi:10.1007/bf02978865 · Cited by 57
Allocation for cascade recycling system
Kim, S., Hwang, T., & Lee, K. M. (1997) · The International Journal of Life Cycle Assessment · doi:10.1007/bf02978418 · Cited by 57
Assessing the sustainability of the UK society using thermodynamic concepts: Part 1
Gasparatos, A., El‐Haram, M. A., & Horner, M. W. (2008) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2008.03.004 · Cited by 55
Kaufman, S. M., Krishnan, N., & Themelis, N. J. (2010) · Environmental Science & Technology · doi:10.1021/es100505u · Cited by 55
Research works printed but not linked: 54
- Ashby, 2016, Chapter 14-the vision: a circular materials economy, 211
- Asmala, 2010, Closing a loop: substance flow analysis of nitrogen and phosphorus in the rainbow trout production and domestic consumption system in Finland, Ambio, 39, 126, 10.1007/s13280-010-0024-5 · doi:10.1007/s13280-010-0024-5
- Badran, 2006, Optimization of municipal solid waste management in Port Said – Egypt, Waste Manag., 26, 534, 10.1016/j.wasman.2005.05.005 · doi:10.1016/j.wasman.2005.05.005
- Balkema, 2002, Indicators for the sustainability assessment of wastewater treatment systems, Urban Water, 4, 153, 10.1016/S1462-0758(02)00014-6 · doi:10.1016/s1462-0758(02)00014-6
- Barrett, 2001, The ecological footprint: a metric for corporate sustainability, Corp. Environ. Strategy, 8, 316, 10.1016/S1066-7938(01)00132-4 · doi:10.1016/s1066-7938(01)00132-4
- Baynes, 2011, Comparison of household consumption and regional production approaches to assess urban energy use and implications for policy, Energy Policy, 39, 7298, 10.1016/j.enpol.2011.08.053 · doi:10.1016/j.enpol.2011.08.053
- Bernard, 2005, The measurement of the energy intensity of manufacturing industries: a principal components analysis, Energy Policy, 33, 221, 10.1016/S0301-4215(03)00220-9 · doi:10.1016/s0301-4215(03)00220-9
- Bottero, 2011, Application of the analytic hierarchy process and the analytic network process for the assessment of different wastewater treatment systems, Environ. Model. Softw., 26, 1211, 10.1016/j.envsoft.2011.04.002 · doi:10.1016/j.envsoft.2011.04.002
- Brunner, 1986, Alternative methods for the analysis of municipal solid waste, Waste Manag. Res., 4, 147, 10.1177/0734242X8600400116 · doi:10.1177/0734242x8600400116
- Chalkias, 2009, A GIS based model for the optimisation of municipal solid waste collection: the case study of Nikea, Athens, Greece, WSEAS Trans. Environ. Dev., 1, 11
- Chang, 2008, Combining GIS with fuzzy multicriteria decision-making for landfill siting in a fast-growing urban region, J. Environ. Manag., 87, 139
- Chong, 2016, A lifecycle-based sustainability indicator framework for waste-to-energy systems and a proposed metric of sustainability, Renew. Sustain. Energy Rev., 56, 797, 10.1016/j.rser.2015.11.036 · doi:10.1016/j.rser.2015.11.036
- Choy, 2004, Process design and feasibility study for small scale MSW gasification, Chem. Eng. J., 105, 31, 10.1016/j.cej.2004.07.012 · doi:10.1016/j.cej.2004.07.012
- Daley, 2013, Emergy accounting for assessing the sustainability of wastewater management systems. New York Water Management Association, Inc (NYWEA), Clear Waters Summer, 43
- Eriksson, 2003, How model-based systems analysis can be improved for waste management planning, Waste Manag. Res., 21, 488, 10.1177/0734242X0302100602 · doi:10.1177/0734242x0302100602
- Ertesvåg, 2000, Exergy analysis of the Norwegian society, Energy, 25, 957, 10.1016/S0360-5442(00)00025-6 · doi:10.1016/s0360-5442(00)00025-6
- Esbensen, 2014, Theory of sampling (TOS) versus measurement uncertainty (MU) – a call for integration, TrAC Trends Anal. Chem., 57, 93, 10.1016/j.trac.2014.02.007 · doi:10.1016/j.trac.2014.02.007
- Esbensen, 2014, Why we need the theory of sampling, Anal. Sci., 21, 30
- Esmaili, 1972, Facility selection and haul optimization model, J. Sanit. Eng. Div., 98, 1005, 10.1061/JSEDAI.0001482 · doi:10.1061/jsedai.0001482
- European Union, 2005, Directive 2005/64/EC of the European Parliament and of the Council of 26 October 2005 on the type-approval of motor vehicles with regard to their reusability, recyclability and recoverability and amending Council Directive 70/156/EEC, L 310/10, Off. J. Eur. Union
- European Union, 2008, Directive 2008/98/EC of 19 November 2008 on waste and repealing certain directives (waste framework directive), L312/3 22.11, Off. J. Eur. Union, 3
- Fang, 2015, Product remanufacturability assessment and implementation based on design features, Procedia CIRP, 26, 571, 10.1016/j.procir.2014.07.027 · doi:10.1016/j.procir.2014.07.027
- FAO, 2009, Chapter 4: major impacts of irrigation and drainage projects
- Fuertes, 1974, Solid waste management: equity trade-off models, J. Urban Plan. Dev. Div., 100, 155, 10.1061/JUPDAJ.0000205 · doi:10.1061/jupdaj.0000205
- Gasparatos, 2009, Assessing the sustainability of the UK society using thermodynamic concepts: Part 2, Renew. Sustain. Energy Rev., 13, 956, 10.1016/j.rser.2008.03.005 · doi:10.1016/j.rser.2008.03.005
- Ghose, 2006, A GIS based transportation model for solid waste disposal – a case study on Asansol municipality, Waste Manag., 26, 1287, 10.1016/j.wasman.2005.09.022 · doi:10.1016/j.wasman.2005.09.022
- Graedel, 2003, vol. 7632, 83
- Gu, 2008, Integrated assessment method for building life cycle environmental and economic performance, Build. Simul., 1, 169, 10.1007/s12273-008-8414-3 · doi:10.1007/s12273-008-8414-3
- Keeler, 1994, Haul trash or haul ash: energy recovery as a component of local solid waste management, J. Environ. Econ. Manag., 27, 205, 10.1006/jeem.1994.1034 · doi:10.1006/jeem.1994.1034
- Kondili, 2005, Review of optimization models in the pollution prevention and control, Comput. Aided Chem. Eng., 20, 1627, 10.1016/S1570-7946(05)80113-0 · doi:10.1016/s1570-7946(05)80113-0
- Krogmann, 2000, Selected characteristics of leachate, condensate and runoff released during composting of biogenic waste, Waste Manag. Res., 18, 235, 10.1177/0734242X0001800305 · doi:10.1177/0734242x0001800305
- Leu, 1998, Cost–benefit analysis of resource material recycling, Resour. Conserv. Recycl., 23, 183, 10.1016/S0921-3449(98)00020-2 · doi:10.1016/s0921-3449(98)00020-2
- Liu, 2014, Direct and indirect energy use in China and the United States, Energy, 71, 414, 10.1016/j.energy.2014.04.089 · doi:10.1016/j.energy.2014.04.089
- Longden, 2007, Distributed or centralised energy-from-waste policy? Implications of technology and scale at municipal level, Energy Policy, 35, 2622, 10.1016/j.enpol.2006.09.013 · doi:10.1016/j.enpol.2006.09.013
- Machado, 2001, Energy and carbon embodied in the international trade of Brazil: an input–output approach, Ecol. Econ., 39, 409, 10.1016/S0921-8009(01)00230-0 · doi:10.1016/s0921-8009(01)00230-0
- Mathieux, 2008, ReSICLED: a new recovery-conscious design method for complex products based on a multicriteria assessment of the recoverability, J. Clean. Prod., 16, 277, 10.1016/j.jclepro.2006.07.026 · doi:10.1016/j.jclepro.2006.07.026
- Nuortio, 2006, Improved route planning and scheduling of waste collection and transport, Expert Syst. Appl., 30, 223, 10.1016/j.eswa.2005.07.009 · doi:10.1016/j.eswa.2005.07.009
- Odum, 1996, Simulation and evaluation with energy systems blocks, Ecol. Model., 93, 155, 10.1016/0304-3800(95)00221-9 · doi:10.1016/0304-3800(95)00221-9
- Powell, 2000, The potential for using life cycle inventory analysis in local authority waste management decision making, J. Environ. Plan. Manag., 43, 351, 10.1080/09640560050010392 · doi:10.1080/09640560050010392
- Saavalainen, 2015, Sustainability assessment of chemical processes: evaluation of three synthesis routes of DMC, J. Chem., 2015, 12
- Schaeffer, 1992, An exergy analysis of the Brazilian economy: from energy production to final energy use, Energy, 17, 841, 10.1016/0360-5442(92)90102-6 · doi:10.1016/0360-5442(92)90102-6
- Schmidt-Bleek, 2008, Factor 10: the future of stuff, Sustain. Sci. Pract. Policy, 4
- Siitonen, 2010, Variables affecting energy efficiency and CO2 emissions in the steel industry, Energy Policy, 38, 2477, 10.1016/j.enpol.2009.12.042 · doi:10.1016/j.enpol.2009.12.042
- Sonesson, 2000, Modelling of waste collection - a general approach to calculate fuel consumption and time, Waste Manag. Res., 18, 115, 10.1177/0734242X0001800203 · doi:10.1177/0734242x0001800203
- Stanisavljevic, 2014, Combination of material flow analysis and substance flow analysis: a powerful approach for decision support in waste management, Waste Manag. Res., 32, 733, 10.1177/0734242X14543552 · doi:10.1177/0734242x14543552
- Steenkamer, 1997, Recycled content in polymer matrix composites through the use of A-glass fibers, Polym. Compos., 18, 300, 10.1002/pc.10283 · doi:10.1002/pc.10283
- Truitt, 1969, Simulation model of urban refuse collection, J. Sanit. Eng. Div., 95, 289, 10.1061/JSEDAI.0000950 · doi:10.1061/jsedai.0000950
- UNEP/WHO, 1996, Chapter 6-field testing methods
- Varouchakis, 2016, Application of Bayesian and cost benefit risk analysis in water resources management, J. Hydrol., 534, 390, 10.1016/j.jhydrol.2016.01.007 · doi:10.1016/j.jhydrol.2016.01.007
- Wall, 1994, Exergy use in the Italian society, Energy, 19, 1267, 10.1016/0360-5442(94)90030-2 · doi:10.1016/0360-5442(94)90030-2
- Wernick, 1995, National material metrics for industrial ecology, Resour. Policy, 21, 189, 10.1016/0301-4207(96)89789-3 · doi:10.1016/0301-4207(96)89789-3
- Wilson, 1977, Strategy evaluation in planning of waste management to land-a critical review of the literature, Appl. Math. Model., 1, 205, 10.1016/0307-904X(77)90007-5 · doi:10.1016/0307-904x(77)90007-5
- Wu, 2002, An economic analysis of biomass gasification and power generation in China, Bioresour. Technol., 83, 65, 10.1016/S0960-8524(01)00116-X · doi:10.1016/s0960-8524(01)00116-x
- Zurbrügg, 2014, How assessment methods can support solid waste management in developing countries—a critical review, Sustainability, 6, 545, 10.3390/su6020545 · doi:10.3390/su6020545
Cited by
Principles for a sustainable circular economy
Velenturf, A. P. M., & Purnell, P. (2021) · Sustainable Production and Consumption · doi:10.1016/j.spc.2021.02.018 · Cited by 1,350
Self-citationCircular economy indicators: What do they measure?
Moraga, G., Huysveld, S., Mathieux, F., Blengini, G. A., Alaerts, L., Van Acker, K., de Meester, S., & Dewulf, J. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.03.045 · Cited by 1,173
A taxonomy of circular economy indicators
Saidani, M., Yannou, B., Leroy, Y., Cluzel, F., & Kendall, A. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.10.014 · Cited by 1,093
Corona, B., Shen, L., Reike, D., Rosales Carreón, J., & Worrell, E. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.104498 · Cited by 987
Bataille, C., Åhman, M., Neuhoff, K., Nilsson, L. J., Fischedick, M., Lechtenböhmer, S., Solano-Rodriquez, B., Denis-Ryan, A., Stiebert, S., Waisman, H., et al. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.107 · Cited by 680
Metadata
- Authors
- Iacovidou, E., Velis, C. A., Purnell, P., Zwirner, O., Brown, A., Hahladakis, J., Millward-Hopkins, J., & Williams, P. T.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2017-11
- Volume
- 166
- Pages
- 910-938
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2734468618
- Cited by
- 317
- References
- 233
- FWCI
- 27.74
- Type
- journal article
- Language
- en
- Open access
- hybrid
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- creativecommons.org/licenses/by/4.0/ (vor)
- Funders
- UK Natural Environment Research CouncilUK Natural Environment Research Council (NERC)
- UK Economic and Social Research CouncilUK Economic and Social Research Council (ESRC)
- Complex Value Optimisation for Resource Recovery (NE/L014149/1)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.