The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Sustainable infrastructure development through use of calcined excavated waste clay as a supplementary cementitious material
Open accessAbstract
Abstract Major infrastructure development projects in London produce large quantities of London clay and use significant volumes of concrete. Portland cement (CEM I) in concrete is normally partially replaced by supplementary cementitious materials such as ground granulated blastfurnace slag or pulverised fuel ash. The supply of supplementary cementitious materials is critical to the production of sustainable concrete. This study has investigated use of waste London clay as a supplementary cementitious material. The optimum calcined clay was produced at 900 °C and concrete made with 30 wt% of CEM I replaced by calcined clay had 28-day strengths greater than control samples. Compressive strengths of concrete containing calcined London clay were similar to concrete containing ground granulated blastfurnace slag and pulverised fuel ash. The production of calcined London clay emits ∼70 kg CO 2 /tonne and this is 91% lower than CEM I. 30 wt% replacement of CEM I by calcined London clay therefore produces concrete with ∼27% lower embodied carbon. London clay can be calcined to form a technically viable supplementary cementitious material and use of this in concrete would enable major civil infrastructure projects to contribute to a circular economy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Scrivener, K. L., John, V. M., & Gartner, E. M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.03.015 · Cited by 3,620
Cited by
Supplementary cementitious materials: New sources, characterization, and performance insights
Juenger, M. C. G., Snellings, R., & Bernal, S. A. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.008 · Cited by 1,260
Cabeza, L. F., Boquera, L., Chàfer, M., & Vérez, D. (2021) · Energy and Buildings · doi:10.1016/j.enbuild.2020.110612 · Cited by 175
Metadata
- Authors
- Zhou, D., Wang, R., Tyrer, M., Wong, H., & Cheeseman, C.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2017-12
- Volume
- 168
- Pages
- 1180-1192
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2752223706
- Cited by
- 183
- References
- 1
- FWCI
- 10.27
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.