The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Life cycle assessment of wire + arc additive manufacturing compared to green sand casting and CNC milling in stainless steel
Open accessAbstract
Wire and Arc Additive Manufacturing (WAAM) is a metal 3D printing technique based on robotic welding. This technique yields potential in decreasing material consumption due to its high material efficiency and freedom of shape. Empirical measurements of WAAM, using a deposition rate of 1 kg/h, were performed on site of MX3D. The measured power consumption per kg stainless steel is 2.72 kW, of which 1.74 is consumed by the welder, 0.44 by the robotic arm, and 0.54 by the ventilation. The material loss was 1.1%. A 98% argon 2% CO2 welding gas was used with a flow of 12 l/min. A cradle-to-gate Life Cycle Assessment (LCA) was performed. To give this assessment context, green sand casting and CNC milling were additionally assessed, through literature and databases. The purpose of this study is to develop insight into the environmental impact of WAAM. Results indicate that, in terms of total ReCiPe endpoints, the environmental impact of producing a kg of stainless steel 308 l product using WAAM is comparable to green sand casting. It equals CNC milling with a material utilization fraction of 0.75. Stainless steel is the main cause of environmental damage in all three techniques, emphasizing the importance of WAAM's mass reduction potential. When environmentally comparing the three techniques for fulfilling a certain function, optimized designs should be introduced for each manufacturing technique. Results can vary significantly based on product shape, function, materials, and process settings.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
The ecoinvent database version 3 (part I): overview and methodology
Wernet, G., Bauer, C., Steubing, B., Reinhard, J., Moreno-Ruiz, E., & Weidema, B. (2016) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-016-1087-8 · Cited by 5,564
Huang, R., Riddle, M., Graziano, D., Warren, J., Das, S., Nimbalkar, S., Cresko, J., & Masanet, E. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.04.109 · Cited by 805
Cited by
An overview of modern metal additive manufacturing technology
Armstrong, M., Mehrabi, H., & Naveed, N. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.10.060 · Cited by 549
Metal additive manufacturing in structural engineering – review, advances, opportunities and outlook
Gardner, L. (2023) · Structures · doi:10.1016/j.istruc.2022.12.039 · Cited by 398
Kanishka, K., & Acherjee, B. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.10.024 · Cited by 343
Colorado, H. A., Velásquez, E. I. G., & Monteiro, S. N. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.04.062 · Cited by 320
Why manufacturers adopt additive manufacturing technologies: The role of sustainability
Niaki, M. K., Torabi, S. A., & Nonino, F. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.03.019 · Cited by 298
Metadata
- Authors
- Bekker, A. C. M., & Verlinden, J. C.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2018-03
- Volume
- 177
- Pages
- 438-447
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2778192006
- Cited by
- 190
- References
- 3
- FWCI
- 4.66
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Life cycle assessment of wire + arc additive manufacturing compared to green sand casting and CNC milling in stainless steel. https://app.cochat.ai/papers/10.1016/j.jclepro.2017.12.148
- The paper
- Bekker, A. C. M., & Verlinden, J. C. (2018). Life cycle assessment of wire + arc additive manufacturing compared to green sand casting and CNC milling in stainless steel. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2017.12.148
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.