The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Can Portland cement be replaced by low-carbon alternative materials? A study on the thermal properties and carbon emissions of innovative cements
Open accessAbstract
One approach to decarbonising the cement and construction industry is to replace Portland cement systems with lower carbon alternatives that have suitable properties. We show that seven cementitious binders comprised of metakaolin, silica fume and nano-silica have improved thermal performance compared with Portland cement and we calculate the full CO 2 emissions associated with manufacture and transport of each binder for the first time. Due to their high porosity, the thermal conductivity of these novel cements is 58–90% lower than Portland cement, and we show that a thin layer (20 mm), up to 80% thinner than standard insulating materials, is enough to bring energy emissions in domestic construction into line with the UK 2013 Building Regulations. Carbon emissions in domestic construction can be reduced by c . 20–50% and these cementitious binders are able to be recycled, unlike traditional insulation materials. • Green cements high in porosity and very low in thermal conductivity are developed. • They are a low-carbon alternative to traditional insulation materials and mortars. • A simplified GHG emissions estimation method has been proposed in the UK context.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete
Turner, L. K., & Collins, F. G. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.01.023 · Cited by 2,411
The role of inorganic polymer technology in the development of ‘green concrete’
Duxson, P., Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.08.018 · Cited by 1,998
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
Sustainable cement production—present and future
Schneider, M., Romer, M., Tschudin, M., & Bolio, H. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.019 · Cited by 1,643
Global strategies and potentials to curb CO2 emissions in cement industry
Benhelal, E., Zahedi, G., Shamsaei, E., & Bahadori, A. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.10.049 · Cited by 1,580
Al-Homoud, D. M. S. (2005) · Building and Environment · doi:10.1016/j.buildenv.2004.05.013 · Cited by 1,019
Trends and developments in green cement and concrete technology
Imbabi, M. S., Carrigan, C., & McKenna, S. (2012) · International Journal of Sustainable Built Environment · doi:10.1016/j.ijsbe.2013.05.001 · Cited by 1,012
Geopolymer foam concrete: An emerging material for sustainable construction
Zhang, Z., Provis, J. L., Reid, A., & Wang, H. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.01.081 · Cited by 879
Cement industry greenhouse gas emissions – management options and abatement cost
Kajaste, R., & Hurme, M. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.07.055 · Cited by 584
Alonso, S., & Palomo, A. (2001) · Materials Letters · doi:10.1016/s0167-577x(00)00212-3 · Cited by 542
Zhang, Z., Wang, H., Provis, J. L., Bullen, F., Reid, A., & Zhu, Y. (2012) · Thermochimica Acta · doi:10.1016/j.tca.2012.03.021 · Cited by 494
Salas, D. A., Ramirez, A. D., Rodríguez, C. R., Petroche, D. M., Boero, A. J., & Duque-Rivera, J. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.11.078 · Cited by 282
Microstructural and morphological evolution of fly ash based geopolymers
Nath, S. K., Maitra, S., Mukherjee, S., & Kumar, S. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.106 · Cited by 274
Concrete blocks for thermal insulation in hot climate
Al-Jabri, K. S., Hago, A. W., Alnuaimi, A., & Al-Saidy, A. H. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.08.018 · Cited by 240
Wu, Y., Wang, J.-Y., Monteiro, P. J. M., & Zhang, M.-H. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.04.004 · Cited by 216
Synthesizing one-part geopolymers from rice husk ash
Sturm, P., Gluth, G. J. G., Brouwers, H. J. H., & Kühne, H.-C. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.08.017 · Cited by 200
Investigation of properties of low-strength lightweight concrete for thermal insulation
Ünal, O., Uygunoğlu, T., & Yıldız, A. (2005) · Building and Environment · doi:10.1016/j.buildenv.2005.09.024 · Cited by 184
Vacuum insulation panels—From research to market
Fricke, J., Heinemann, U., & Ebert, H.-P. (2007) · Vacuum · doi:10.1016/j.vacuum.2007.10.014 · Cited by 175
Mellado, A., Catalán, C., Bouzón, N., Borrachero, M. V., Monzó, J. M., & Payá, J. (2014) · RSC Adv. · doi:10.1039/c4ra03375b · Cited by 172
Life cycle assessment of the production of cement: A Brazilian case study
Stafford, F. D. N., Pereira, F. R., Labrincha, J. A., & Hotza, D. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.07.050 · Cited by 170
Nie, Q., Hu, W., Ai, T., Huang, B., Shu, X., & He, Q. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.08.144 · Cited by 152
Grilo, J., Silva, A. S., Faria, P., et al. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.10.045 · Cited by 149
Effect of nano-SiO2 on the alkali-activated characteristics of metakaolin-based geopolymers
Gao, K., Lin, K., Wang, D., Hwang, C., Tuấn, B. L. A., Shiu, H., & Cheng, T. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.07.027 · Cited by 139
Garbev, K., Bornefeld, M., Beuchle, G., & Stemmermann, P. (2008) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2008.02601.x · Cited by 128
Life cycle assessment of the production of Portland cement: a Southern Europe case study
Stafford, F. D. N., Dias, A. C., Arroja, L., Labrincha, J. A., & Hotza, D. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.02.110 · Cited by 118
Thermal properties of novel binary geopolymers based on metakaolin and alternative silica sources
Villaquirán‐Caicedo, M. A., de Gutiérrez, R. M., Sulekar, S. S., et al. (2015) · Applied Clay Science · doi:10.1016/j.clay.2015.10.005 · Cited by 117
Long-term behavior of lime–metakaolin pastes at ambient temperature and humid curing condition
Silva, A. S., Gameiro, A., Grilo, J., Veiga, R., & Velosa, A. (2014) · Applied Clay Science · doi:10.1016/j.clay.2013.12.016 · Cited by 93
Influence of calcium aluminate cement (CAC) on alkaline activation of red clay brick waste (RCBW)
Reig, L., Soriano, L., Borrachero, M. V., Monzó, J., & Payá, J. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2015.10.021 · Cited by 87
Alam, M., Singh, H., Brunner, S., & Naziris, C. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2013.11.027 · Cited by 86
C–(N)–S–H and N–A–S–H gels: Compositions and solubility data at 25°C and 50°C
Gómez-Zamorano, L. Y., Balonis, M., Erdemli, B., Neithalath, N., & Sant, G. (2017) · Journal of the American Ceramic Society · doi:10.1111/jace.14715 · Cited by 81
Alkali Ash Material: A Novel Fly Ash-Based Cement
Rostami, H., & Brendley, W. H. (2003) · Environmental Science & Technology · doi:10.1021/es026317b · Cited by 80
Lazaro, A., Quercia, G. G., Brouwers, H. J. H., & Geus, J. W. (2013) · World Journal of Nano Science and Engineering · doi:10.4236/wjnse.2013.33006 · Cited by 60
Nanotechnologies for sustainable construction
Lazaro, A., Yu, Q., & Brouwers, H. J. H. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100370-1.00004-4 · Cited by 45
Chan, C. C. S., Thorpe, D., & Islam, M. M. (2015) · IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) · doi:10.1109/ieem.2015.7385647 · Cited by 21
Cited by
Sustainable concrete: Building a greener future
Assi, L., Carter, K., Deaver, E. (., Anay, R., & Ziehl, P. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.07.123 · Cited by 273
Farfan, J., Fasihi, M., & Breyer, C. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.01.226 · Cited by 256
Lippiatt, N., Ling, T.-C., & Pan, S.-Y. (2020) · Journal of Building Engineering · doi:10.1016/j.jobe.2019.101062 · Cited by 189
Towards a business case for CO2 mineralisation in the cement industry
Strunge, T., Renforth, P., & Van der Spek, M. (2022) · Communications Earth & Environment · doi:10.1038/s43247-022-00390-0 · Cited by 109
Life cycle assessment of alkali-activated materials: a systematic literature review
Nikravan, M., Firdous, R., & Stephan, D. (2023) · Low-carbon Materials and Green Construction · doi:10.1007/s44242-023-00014-6 · Cited by 93
Metadata
- Authors
- Maddalena, R., Roberts, J. J., & Hamilton, A.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2018-06
- Volume
- 186
- Pages
- 933-942
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2792224255
- Cited by
- 532
- References
- 34
- FWCI
- 37.50
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.