The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Mechanical and microstructural characterization of geopolymers derived from red mud and fly ashes
Abstract
As a toxic industrial waste product, red mud causes severe environmental concern due to its strong alkalinity. In this study, red mud was systematically investigated for beneficial utilization as a raw material for geopolymer production. One type of red mud along with three types of fly ash were utilized to form geopolymers as construction and building materials. Source materials were activated using two types of activator and cured at both ambient and elevated temperatures. The compressive strength, geopolymerization process, and microstructure of the geopolymers were characterized in this study. The geopolymer derived from red mud and class C fly ash obtained a compressive strength of 15.2 MPa under ambient temperature curing at a significantly low NaOH concentration compared to the class F fly ash-based geopolymer. In contrast, the geopolymers derived from red mud and class F fly ash were unable to obtain a serviceable strength when activated with the NaOH solution alone. Elevated temperature curing or using a composite activator proved to be solutions to this issue. This study indicated that the high alkalinity of red mud contributed to geopolymerization, but additional NaOH was necessary to achieve maximum compressive strength.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
Geopolymers and geopolymeric materials
Davidovits, J. (1989) · Journal of Thermal Analysis · doi:10.1007/bf01904446 · Cited by 1,148
Influence of NaOH solution on the synthesis of fly ash geopolymer
Rattanasak, U., & Chindaprasirt, P. (2009) · Minerals Engineering · doi:10.1016/j.mineng.2009.03.022 · Cited by 939
Workability and strength of coarse high calcium fly ash geopolymer
Chindaprasirt, P., Chareerat, T., & Sirivivatnanon, V. (2007) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2006.11.002 · Cited by 863
Influence of calcium compounds on the mechanical properties of fly ash geopolymer pastes
Temuujin, J., van Riessen, A., & Williams, R. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.12.121 · Cited by 834
Synthesis and characterization of red mud and rice husk ash-based geopolymer composites
He, J., Jie, Y., Zhang, J., Yu, Y., & Zhang, G. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.11.010 · Cited by 770
Reaction mechanisms in the geopolymeric conversion of inorganic waste to useful products
van Deventer, J. S. J., Provis, J. L., Duxson, P., & Lukey, G. C. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.02.044 · Cited by 580
Development of paving blocks from synergistic use of red mud and fly ash using geopolymerization
Kumar, A., & Kumar, S. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.09.013 · Cited by 425
Fly ash-based geopolymer concrete: study of slender reinforced columns
Sumajouw, D. M. J., Hardjito, D., Wallah, S. E., & Rangan, B. V. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0523-8 · Cited by 360
He, J. X., Zhang, J., Yu, Y., & Zhang, G. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.12.011 · Cited by 353
Synthesis and Characterization of Geopolymer from Bayer Red Mud with Thermal Pretreatment
Ye, N., Yang, J., Ke, X., Zhu, J., Li, Y., Xiang, C., Wang, H., Li, L., & Xiao, B. (2014) · Journal of the American Ceramic Society · doi:10.1111/jace.12840 · Cited by 257
UTILIZATION OF ALUMINA RED MUD FOR SYNTHESIS OF INORGANIC POLYMERIC MATERIALS
Dimas, D. D., Giannopoulou, I. P., & Panias, D. (2009) · Mineral Processing and Extractive Metallurgy Review · doi:10.1080/08827500802498199 · Cited by 214
Synthesis, Characterization, and Mechanical Properties of Red Mud–Based Geopolymers
Zhang, G., He, J. X., & Gambrell, R. P. (2010) · Transportation Research Record Journal of the Transportation Research Board · doi:10.3141/2167-01 · Cited by 176
Nie, Q., Hu, W., Ai, T., Huang, B., Shu, X., & He, Q. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.08.144 · Cited by 152
Self-citationBayer-geopolymers: An exploration of synergy between the alumina and geopolymer industries
van Riessen, A., Jamieson, E., Kealley, C. S., Hart, R. D., & Williams, R. P. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2013.04.010 · Cited by 90
Wang, Z., Wu, J., Zhao, P., Dai, N., Zhai, Z., & Ai, T. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.11.242 · Cited by 68
Synthesis and characterization of geopolymers for infrastructural applications
He, J. X. (2012) · Louisiana State University · doi:10.31390/gradschool_dissertations.164 · Cited by 23
Cited by
Effects of Si/Al ratio on the efflorescence and properties of fly ash based geopolymer
Wang, Y., Liu, X., Zhang, W., Li, Z., Zhang, Y., Li, Y., & Ren, Y. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118852 · Cited by 395
Geopolymer-zeolite composites: A review
Rożek, P., Król, M., & Mozgawa, W. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.05.152 · Cited by 361
A high-strength red mud–fly ash geopolymer and the implications of curing temperature
Bai, B., Bai, F., Nie, Q., & Jia, X. (2023) · Powder Technology · doi:10.1016/j.powtec.2023.118242 · Cited by 351
Self-citationShi, Y., Zhao, Q., Xue, C., Jia, Y., Guo, W., Zhang, Y., & Qiu, Y. (2023) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2023.104999 · Cited by 296
Properties and characterization of green one-part geopolymer activated by composite activators
Ma, C., Zhao, B., Guo, S., Long, G., & Xie, Y. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.02.159 · Cited by 273
Metadata
- Authors
- Hu, W., Nie, Q., Huang, B., Shu, X., & He, Q.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2018-06
- Volume
- 186
- Pages
- 799-806
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2789899317
- Cited by
- 274
- References
- 17
- FWCI
- 22.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.