The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Properties and characterization of green one-part geopolymer activated by composite activators
Abstract
Abstract One-part geopolymer similar to conventional Portland cement by just adding water is a new type of green cementitious material. Na2SiO3-anhydrous is an excellent powder activator for preparing one-part geopolymer, but its CO2-e emission and alkalinity are very high. In this study, the Na2CO3 was used to replace a portion of Na2SiO3-anhydrous, and the properties of one-part geopolymer with composite activators were investigated systematically. The possible influencing mechanism of the complex use of activators in one-part geopolymer was proposed. Test results indicate that the replacement level of Na2CO3 has slight impact on the fluidity and increases the final setting time significantly. This is directly related to the initial heat release rate and the type of network structures formed. The compressive strength decreases with increasing the Na2CO3 content. On the one hand, the quantity of gelatinous products reduces and calcite is produced as the new phase after replacing Na2SiO3-anhydrous by Na2CO3. On the other hand, the gathering of calcite and low-crystalline CaCO3 in some regions leads to the generation of many large micro-cracks, which explains the change in the porosity of the unfavorable pores. Judged from the cost per MPa and total CO2-e emission for a cubic meter of cementitious materials, one-part geopolymer activated by composite activators is cleaner than that activated by single Na2SiO3-anhydrous or Na2CO3. This study provides a guidance for preparing one-part geopolymer with lower alkalinity and potential environmental impact.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete
Turner, L. K., & Collins, F. G. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.01.023 · Cited by 2,411
The role of inorganic polymer technology in the development of ‘green concrete’
Duxson, P., Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.08.018 · Cited by 1,998
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
Advances in alternative cementitious binders
Juenger, M. C. G., Winnefeld, F., Provis, J. L., & Ideker, J. H. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.012 · Cited by 1,851
One-part alkali-activated materials: A review
Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.001 · Cited by 1,456
Habert, G., d’Espinose de Lacaillerie, J. B., & Roussel, N. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.03.012 · Cited by 1,407
Ismail, I., Bernal, S. A., Provis, J. L., San Nicolas, R., Hamdan, S., & van Deventer, J. S. J. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2013.09.006 · Cited by 1,317
Yip, C. K., Lukey, G. C., & van Deventer, J. S. J. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.10.042 · Cited by 1,274
Barbosa, V. F. F., MacKenzie, K. J. D., & Thaumaturgo, C. (2000) · International Journal of Inorganic Materials · doi:10.1016/s1466-6049(00)00041-6 · Cited by 1,128
Ben Haha, M., Le Saout, G., Winnefeld, F., & Lothenbach, B. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.016 · Cited by 1,059
Cited by
Advances in geopolymer materials: A comprehensive review
Cong, P., & Cheng, Y. (2021) · Journal of Traffic and Transportation Engineering (English Edition) · doi:10.1016/j.jtte.2021.03.004 · Cited by 481
Xiao, R., Ma, Y., Jiang, X., Zhang, M., Zhang, Y., Wang, Y., Huang, B., & He, Q. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119610 · Cited by 359
Metadata
- Authors
- Ma, C., Zhao, B., Guo, S., Long, G., & Xie, Y.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2019-05
- Volume
- 220
- Pages
- 188-199
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2914279912
- Cited by
- 273
- References
- 44
- FWCI
- 19.81
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Properties and characterization of green one-part geopolymer activated by composite activators. https://app.cochat.ai/papers/10.1016/j.jclepro.2019.02.159
- The paper
- Ma, C., Zhao, B., Guo, S., Long, G., & Xie, Y. (2019). Properties and characterization of green one-part geopolymer activated by composite activators. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2019.02.159
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.