The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
An approach to cleaner production for machining hardened steel using different cooling-lubrication conditions
Abstract
Abstract Extreme thermal conditions in machining of hardened steel impair the overall performance especially the tool life and surface quality. Although, the cutting fluids are known for improving the tool life and surface quality, yet they have adverse effects on the human health as well as environment because of the presence of potentially harmful chemical ingredients. Hence, in view of the above problems associated with the cutting fluids, the implementation of sustainable methods is advantageous which further reduces the use of cutting fluids i.e. dry, minimum quantity lubrication (MQL) spray system and solid lubricant with compressed air cooling system. In this paper, the effect of three sustainable techniques, along with the traditional flood cooling system, on prominent machining indices such as cutting temperature, surface roughness, chip characteristics and tool wear in plain turning of hardened AISI 1060 steel has been investigated. In the end, the Pugh matrix environmental approach has been used to establish the sustainability assessment model (in terms of environmental effect, operator health, coolant cost, recycling cost and disposal, part cleaning and selected machining responses) among the used cooling/lubrication conditions. The research findings show that use of MQL system can ameliorate the heat transfer problem, and divulge quite promising results. Therefore, it is suggested that MQL system, provides environment friendliness, cleaner production and helps to improve the desirable machinability characteristics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Gupta, M. K., Sood, P. K., & Sharma, V. S. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.06.184 · Cited by 207
Self-citationRetractedReport of the World Commission on Environment and Development: "Our Common Future"
Al-Athel, S. A., Fadika, L. M., István, L., Shijun, M., de Botero, M. M., Singh, N. K., Noqueira-Nato, P., Ramphal, S., Ruckelshaus, W. D., Sahnoun, M., et al. (1987) · Cited by 5,750
Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids
Shokrani, A., Dhokia, V., & Newman, S. T. (2012) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2012.02.002 · Cited by 859
Cooling techniques for improved productivity in turning
Sharma, V. S., Dogra, M., & Suri, N. M. (2009) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2008.12.010 · Cited by 539
Vegetable oils as a potential cutting fluid—An evolution
Shashidhara, Y. M., & Jayaram, S. R. (2010) · Tribology International · doi:10.1016/j.triboint.2009.12.065 · Cited by 512
Transitioning to sustainable production – part II: evaluation of sustainable machining technologies
Pušavec, F., Kramar, D., Krajnik, P., & Kopač, J. (2010) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2010.01.015 · Cited by 373
Sarıkaya, M., & Güllü, A. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.12.020 · Cited by 362
Application of sustainable techniques in metal cutting for enhanced machinability: a review
Chetan, C., Ghosh, S., & Rao, P. V. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.03.039 · Cited by 355
Dhar, N. R., Islam, M., Islam, S., & Mithu, M. A. H. (2005) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2005.06.047 · Cited by 355
Dry machining: A step towards sustainable machining – Challenges and future directions
Goindi, G. S., & Sarkar, P. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.07.235 · Cited by 349
Cited by
Sen, B., Mia, M., Krolczyk, G. M., Mandal, U. K., & Mondal, S. P. (2021) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-019-00158-6 · Cited by 328
Self-citationA review on deep learning in machining and tool monitoring: methods, opportunities, and challenges
Nasir, V., & Sassani, F. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-07325-7 · Cited by 301
Ji, M., Xu, J., Chen, M., & Mansori, M. E. (2020) · Procedia Manufacturing · doi:10.1016/j.promfg.2020.02.118 · Cited by 40
Metadata
- Authors
- Mia, M., Gupta, M. K., Singh, G., Królczyk, G., & Pimenov, D. Y.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2018-06
- Volume
- 187
- Pages
- 1069-1081
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2795316462
- Cited by
- 261
- References
- 25
- FWCI
- 20.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An approach to cleaner production for machining hardened steel using different cooling-lubrication conditions. https://app.cochat.ai/papers/10.1016/j.jclepro.2018.03.279
- The paper
- Mia, M., Gupta, M. K., Singh, G., Królczyk, G., & Pimenov, D. Y. (2018). An approach to cleaner production for machining hardened steel using different cooling-lubrication conditions. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2018.03.279
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.