Evaluating greenhouse gas emissions and energy recovery from municipal and industrial solid waste using waste-to-energy technology
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
In recent years, considerable efforts have been devoted to developing waste-to-energy (WTE) technologies that can reduce the volume of waste and mitigate its negative effects on the environment. Waste is usually classified as municipal solid waste (MSW) or industrial solid waste (ISW). Both types (without hazards) can be treated by WTE technology, and both offer high potential rates of energy recovery. In Taiwan, five categories of general ISW—wood, cooking oil, plastic, lubricants, and rubber—are routinely recycled as auxiliary fuels in WTE plants. This study examined the potential for energy recovery and the extent of greenhouse gas (GHG) emissions from MSW and general ISW to evaluate the environmental performance of WTE technology using data normalization. Totals of 7,394.13 × 10 9 kWh/y and 340.15 × 10 9 kWh/y were recovered from incinerating MSW and general ISW, respectively, from 2014 to 2015. For MSW, the incineration of plastic waste produced the most GHGs (874.66 Gg CO2-eq/y), followed by paper waste (53.92 Gg CO2-eq/y) and textile waste (12.61 Gg CO2-eq/y). Of the various types of general ISW, rubber waste had the highest potential to emit GHGs (11.42 Gg CO2-eq/y). The incineration of MSW made a far greater contribution to total GHG emissions than did that of general ISW. Plastic MSW had the greatest environmental impact, and it should thus be treated carefully due to its greater potential for GHG emissions. The WTE technology has shown to improve waste management to treat both MSW and general ISW in Taiwan. These findings may be extrapolated for use in other countries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
What a Waste : A Global Review of Solid Waste Management
Hoornweg, D., & Bhada-Tata, P. (2012) · doi:10.1596/17388 · Cited by 3,129
Evaluation of greenhouse gas emissions for several municipal solid waste management strategies
Chen, Y.-C., & Lo, S.-L. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.11.058 · Cited by 103
Self-citation
Cited by
Kumar, R., Verma, A., Shome, A., Sinha, R., Sinha, S., Jha, P. K., Kumar, R., Kumar, P., Shubham, Das, S., et al. (2021) · Sustainability · doi:10.3390/su13179963 · Cited by 1,111
Landfill Impacts on the Environment—Review
Vaverková, M. D. (2019) · Geosciences · doi:10.3390/geosciences9100431 · Cited by 441
(Micro)plastics and the UN Sustainable Development Goals
Walker, T. R. (2021) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2021.100497 · Cited by 322
Treatment of wastewater from petroleum industry: current practices and perspectives
Varjani, S., Joshi, R., Srivastava, V. K., Ngo, H. H., & Guo, W. (2020) · Environmental Science and Pollution Research · doi:10.1007/s11356-019-04725-x · Cited by 313
Pricing and advertising strategies in conceptual waste management planning
Šomplák, R., Kůdela, J., Smejkalová, V., Nevrlý, V., Pavlas, M., & Hrabec, D. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118068 · Cited by 43
Metadata
- Authors
- Chen, Y.-C.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2018-08
- Volume
- 192
- Pages
- 262-269
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2802298092
- Cited by
- 164
- References
- 2
- FWCI
- 13.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.