Adsorption behavior of salicylic acid on biochar as derived from the thermal pyrolysis of barley straws
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Abstract Abundant wastes of barley straws were utilized as precursor to prepare biochar adsorbent through thermal pyrolysis. Pore characteristics, morphology, and attraction extent of the prepared adsorbent toward salicylic acid were identified. The obtained biochar had a surface area of 435.52 m2/g, a pore volume of 0.241 cm3/g, and an average pore width of 22.16 A. The effects of batch adsorption variables, such as initial salicylic acid concentration (50–250 mg/L), contact time (0–24 h), initial pH (3–11), and temperature (25 °C–45 °C) on the biochar performance were tested. Equilibrium data analysis revealed the best correlation of the Langmuir isotherms, with maximum salicylic acid uptakes of 189.12, 197.43, and 210.56 mg/g at 25 °C, 35 °C, and 45 °C, respectively. The salicylic acid/biochar system exhibited spontaneous, chemisorption, and endothermic natures. Considering its favorable pore characteristics and high attraction performance, barley straw biochar could be a suitable adsorbent to eliminate salicylic acid from wastewaters.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sorption characteristics of N-nitrosodimethylamine onto biochar from aqueous solution
Chen, C., Zhou, W., & Lin, D. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2014.12.059 · Cited by 88
Cited by
Novel insights into the adsorption of organic contaminants by biochar: A review
Luo, Z., Yao, B., Yang, X., Wang, L., Xu, Z., Yan, X., Tian, L., Zhou, H., & Zhou, Y. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2021.132113 · Cited by 293
Biochar based catalysts for the abatement of emerging pollutants: a review
Do Minh, T., Song, J., Deb, A., Cha, L., Srivastava, V., & Sillanpää, M. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124856 · Cited by 231
Qin, C., Wang, H., Yuan, X., Xiong, T., Zhang, J., & Zhang, J. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122977 · Cited by 205
Preparation of straw biochar and application of constructed wetland in China: A review
Wang, H., Xu, J., & Sheng, L. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.123131 · Cited by 163
Production of biochar from rice straw and its application for wastewater remediation − An overview
Foong, S. Y., Chan, Y. H., Chin, B. L. F., Lock, S. S. M., Yee, C. Y., Yiin, C. L., Peng, W., & Lam, S. S. (2022) · Bioresource Technology · doi:10.1016/j.biortech.2022.127588 · Cited by 157
Metadata
- Authors
- Ahmed, M. J., & Hameed, B. H.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 195
- Pages
- 1162-1169
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2806206988
- Cited by
- 108
- References
- 1
- FWCI
- 4.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.