Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 251

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Effectiveness of green and cool roofs in mitigating urban heat island effects during a heatwave event in the city of Melbourne in southeast Australia

Open access
Imran, H.M., Kala, J., Ng, A.W.M., Muthukumaran, S. · 2018 · Journal of Cleaner Production

Abstract

This study evaluates the effectiveness of green and cool roofs as potential Urban Heat Island (UHI) mitigation strategies, and the impacts of these strategies on human thermal comfort during one of the most extreme heatwave events (27th - 30th January 2009) in the city of Melbourne in southeast Australia. The Weather Research and Forecasting model coupled with the Single Layer Urban Canopy Model including different physical parameterization for various types of roofs (conventional, green and cool roofs) is used to investigate the impacts of green and cool roofs. Results show that the maximum roof surface UHI is reduced during the day by 1°C to 3.8°C by increasing green roof fractions from 30% to 90%, and by 2.2°C to 5.2°C by increasing the albedo of cool roofs from 0.50 to 0.85. Cool roofs are more efficient than the green roofs in reducing the UHI with maximum differences of up to 1.4°C. The reductions of the UHI vary linearly with the increasing green roof fractions, but slightly non-linearly with the increasing albedo of cool roofs. The maximum reductions in wind speed are 1.25 m s-1 and 1.75 m s-1 with 90% green and cool roofs (albedo 0.85) respectively. While previous studies report that the advection of moist air from rural areas is a key mechanism, this study shows that this is not the case for the extreme heatwave event due to the very dry and warm conditions, and instead, convective rolls play a more important role. This study also shows that initial soil moisture for green roofs does not have a substantial impact on the UHI. Finally, green roofs improve human thermal comfort by reducing the Universal Thermal Comfort Index by up to 1.5°C and 5.7°C for pedestrian and roof surface levels respectively, and by 2.4°C and 8°C for cool roofs for the same levels.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.jclepro.2018.06.179

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 251

Metadata

Authors
Imran, H. M., Kala, J., Ng, A. W. M., & Muthukumaran, S.
Venue
Journal of Cleaner Production
Publisher
Elsevier BV
Published
2018-10
Volume
197
Pages
393-405
ISSN
0959-6526 (ISSN-L)
OpenAlex
W2808764757
Cited by
251
References
2
FWCI
9.87
Type
journal article
Language
en
Open access
green

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.