The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Utilization of red mud in geopolymer-based pervious concrete with function of adsorption of heavy metal ions
Abstract
Abstract Red mud (RM) is a kind of industrial solid waste that is difficult to utilize,but it contains much alkali and has the ability of adsorbing some heavy metal ions. Due to these characteristics, red mud could be used as a raw material to develop a geopolymer based pervious concrete having rainwater purification function with granulated blast furnace slag (GBFS). Following this, influence of different factors including RM content, the sodium hydroxide to silicate (Na2O/SiO2) mole ratio, and the alkali concentration of the activator on the mechanical properties and ability of adsorbing heavy metal ions were investigated. XRD, SEM and EDS were then used to characterize the microstructure and morphology in attempt to reveal the mechanisms on the strength formation and on the adsorption of heavy metal ions. The results show that both the Na2O/SiO2 mole ratio and the alkali concentration of the activator had an obvious effect on the strength of the RM-GBFS-based geopolymer pervious concrete, but little effect on the adsorption of heavy metal ions. Moreover, with the increasing content of RM, the strength of the RM-GBFS-based geopolymer pervious concrete decreased, while the adsorption of heavy metal ions improved significantly. The possible reason for the excellent ability of adsorbing heavy metal ions can be attributed to the composition of the hardened RM-GBFS-based geopolymer system including geopolymeric gel, C-S-H gel with a lower Ca/Si ratio and some raw RM particles that have great ability of adsorbing heavy metal ions. As the compressive strength at 28 d of the RM-GBFS based geopolymer pervious concrete (containing 30 wt% RM in the geopolymer) can reach 18.53 MPa, it can applied in the light road pavement in China, and this pervious concrete has been demonstrated to have the function of rainwater purification due to its higher removal of heavy metal ions from solution that can reach 53%–77%. Therefore, it can be concluded that it is feasible to employ RM for manufacturing geopolymer-based pervious concrete with function of rainwater purification.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Removal of heavy metal ions from wastewaters: A review
Fu, F., & Wang, Q. (2011) · Journal of Environmental Management · doi:10.1016/j.jenvman.2010.11.011 · Cited by 8,703
Mechanism of geopolymerization and factors influencing its development: a review
Khale, D., & Chaudhary, R. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0401-4 · Cited by 1,463
Yip, C. K., Lukey, G. C., & van Deventer, J. S. J. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.10.042 · Cited by 1,274
On the Development of Fly Ash-Based Geopolymer Concrete
(2004) · ACI Materials Journal · doi:10.14359/13485 · Cited by 1,254
Removal of dyes from aqueous solution using fly ash and red mud
Wang, S., Boyjoo, Y., Choueib, A., & Zhu, Z. H. (2005) · Water Research · doi:10.1016/j.watres.2004.09.011 · Cited by 924
Durability of geopolymer materials in sodium and magnesium sulfate solutions
Bakharev, T. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.09.002 · Cited by 783
Gupta, V. K., Gupta, M., & Sharma, S. (2001) · Water Research · doi:10.1016/s0043-1354(00)00389-4 · Cited by 765
Adsorption of heavy metals on Na-montmorillonite. Effect of pH and organic substances
Abollino, O., Aceto, M., Malandrino, M., Sarzanini, C., & Mentasti, E. (2003) · Water Research · doi:10.1016/s0043-1354(02)00524-9 · Cited by 728
Immobilisation of heavy metal in cement-based solidification/stabilisation: A review
Chen, Q. Y., Tyrer, M., Hills, C. D., Yang, X. M., & Carey, P. (2009) · Waste Management · doi:10.1016/j.wasman.2008.01.019 · Cited by 705
Sodium silicate-based, alkali-activated slag mortars
Brough, A. R., & Atkinson, A. (2002) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)00717-2 · Cited by 694
PROPERTIES OF GEOPOLYMER CEMENTS
Davidovits, J. (1994) · Cited by 660
The structure and stoichiometry of C-S-H
Nonat, A. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.04.035 · Cited by 603
(Micro)-structural comparison between geopolymers, alkali-activated slag cement and Portland cement
Lecomte, I., Henrist, C., Liégeois, M., Maseri, F., Rulmont, A., & Cloots, R. (2006) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2005.12.021 · Cited by 597
Review of permeable pavement systems
Scholz, M., & Grabowiecki, P. (2007) · Building and Environment · doi:10.1016/j.buildenv.2006.11.016 · Cited by 592
Damage behavior of geopolymer composites exposed to elevated temperatures
Kong, D. L. Y., & Sanjayan, J. G. (2008) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2008.08.001 · Cited by 581
Bauxite residue issues: III. Alkalinity and associated chemistry
Gräfe, M., Power, G., & Klauber, C. (2011) · Hydrometallurgy · doi:10.1016/j.hydromet.2011.02.004 · Cited by 513
Regeneration of adsorbents and recovery of heavy metals: a review
Lata, S., Singh, P. K., & Samadder, S. R. (2015) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-014-0714-9 · Cited by 491
The heavy metal adsorption characteristics on metakaolin-based geopolymer
Cheng, T. W., Lee, M. L., Ko, M. S., Ueng, T. H., & Yang, S. F. (2012) · Applied Clay Science · doi:10.1016/j.clay.2011.11.027 · Cited by 456
Environmental assessment, management and utilization of red mud in China
Liu, W., Chen, X., Li, W., et al. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.06.080 · Cited by 376
Self-citationSynthesis and strength optimization of one-part geopolymer based on red mud
Ye, N., Yang, J., Liang, S., Hu, Y., Hu, J., Xiao, B., & Huang, Q. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.099 · Cited by 363
Fly ash-based geopolymer for Pb removal from aqueous solution
Al-Zboon, K., Al-Harahsheh, M. S., & Hani, F. B. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2011.01.133 · Cited by 344
Reuse of a treated red mud bauxite waste: studies on environmental compatibility
Brunori, C., Cremisini, C., Massanisso, P., Pinto, V., & Torricelli, L. (2005) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2004.09.010 · Cited by 339
One‐Part Geopolymers Based on Thermally Treated Red Mud/NaOH Blends
Ke, X., Bernal, S. A., Ye, N., Provis, J. L., & Yang, J. (2015) · Journal of the American Ceramic Society · doi:10.1111/jace.13231 · Cited by 283
Singh, M., & Siddique, R. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.09.026 · Cited by 275
Khan, T. A., Chaudhry, S. A., & Ali, I. (2015) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2014.12.021 · Cited by 272
Bonding and abrasion resistance of geopolymeric repair material made with steel slag
Hu, S., Wang, H., Zhang, G., & Ding, Q. (2008) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2007.04.004 · Cited by 258
Utilization of red mud derived from bauxite in self-compacting concrete
Liu, R.-X., & Poon, C. S. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.09.049 · Cited by 244
Solid-state conversion of fly ash to effective adsorbents for Cu removal from wastewater
Wang, S., Li, L., & Zhu, Z. H. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.06.018 · Cited by 220
Pervious high-calcium fly ash geopolymer concrete
Tho-in, T., Sata, V., Chindaprasirt, P., & Jaturapitakkul, C. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.12.028 · Cited by 209
Red mud and fly ash for remediation of mine sites contaminated with As, Cd, Cu, Pb and Zn
Bertocchi, A. F., Ghiani, M., Peretti, R., et al. (2005) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2005.10.043 · Cited by 193
Zhou, R., Liu, X., Luo, L., Zhou, Y., Wei, J., Chen, A., Tang, L., Wu, H., Deng, Y., Zhang, F., et al. (2017) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2017.01.023 · Cited by 187
Shabalala, A. N., Ekolu, S. O., Diop, S., & Solomon, F. (2017) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2016.10.027 · Cited by 159
Properties and microstructure of the hardened alkali-activated red mud–slag cementitious material
Pan, Z., Li, D., Yu, J., & Yang, N. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00093-0 · Cited by 157
Adsorption of chromium ions in activated carbon
Schneider, R. M., Cavalin, C. F., de Barros, M. A. S. D., & Tavares, C. R. G. (2007) · Chemical Engineering Journal · doi:10.1016/j.cej.2007.01.031 · Cited by 128
Li, D., Wan, J., Ma, Y., Wang, Y., Huang, M., & Chen, Y. (2015) · PLoS ONE · doi:10.1371/journal.pone.0118776 · Cited by 110
Zhang, Y. J., Zhao, Y. L., Li, H. H., & Xu, D. L. (2008) · Journal of Materials Science · doi:10.1007/s10853-008-3028-9 · Cited by 99
Nnadi, E. O., Newman, A., Coupe, S. J., & Mbanaso, F. U. (2014) · Journal of Environmental Management · doi:10.1016/j.jenvman.2014.08.020 · Cited by 90
The contribution of highway surfaces to urban stormwater sediments and metal loadings
Ellis, J. B., Revitt, D. M., Harrop, D., & Beckwith, P. R. (1987) · The Science of The Total Environment · doi:10.1016/0048-9697(87)90457-8 · Cited by 88
Heavy metal removal capacity of individual components of permeable reactive concrete
Holmes, R. R., Hart, M. L., & Kevern, J. T. (2016) · Journal of Contaminant Hydrology · doi:10.1016/j.jconhyd.2016.12.005 · Cited by 74
High-surface-area activated red mud for efficient removal of methylene blue from wastewater
Hu, Z., Gao, Z.-M., Liu, X., & Yuan, Z. (2017) · Adsorption Science & Technology · doi:10.1177/0263617416684348 · Cited by 71
Stabilization of heavy metal contaminated marine sediments with red mud and apatite composite
Shin, W.-S., & Kim, Y. (2015) · Journal of Soils and Sediments · doi:10.1007/s11368-015-1279-z · Cited by 59
Cited by
Vardhan, K. H., Kumar, P. S., & Panda, R. C. (2019) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2019.111197 · Cited by 1,618
A high-strength red mud–fly ash geopolymer and the implications of curing temperature
Bai, B., Bai, F., Nie, Q., & Jia, X. (2023) · Powder Technology · doi:10.1016/j.powtec.2023.118242 · Cited by 351
Geopolymer concrete as sustainable material: A state of the art review
Farooq, F., Jin, X., Faisal Javed, M., Akbar, A., Izhar Shah, M., Aslam, F., & Alyousef, R. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124762 · Cited by 344
Metadata
- Authors
- Chen, X., Guo, Y., Ding, S., Zhang, H., Xia, F., Wang, J., & Zhou, M.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 207
- Pages
- 789-800
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2897566771
- Cited by
- 274
- References
- 41
- FWCI
- 15.27
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.