The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
One‐Part Geopolymers Based on Thermally Treated Red Mud/NaOH Blends
Abstract
In this study, one‐part “just add water” geopolymer binders are synthesized through the alkali‐thermal activation of the red mud which is relatively rich in both alumina and calcium. Calcination of the red mud with sodium hydroxide pellets at 800°C leads to decomposition of the original silicate and aluminosilicate phases present in the red mud, which promotes the formation of new compounds with hydraulic character, including a partially ordered peralkaline aluminosilicate phase and the calcium‐rich phases C 3 A and α‐C 2 S. The hydration of the “one‐part geopolymer” leads to the formation of zeolites and a disordered binder gel as the main reaction products, and the consequent development of compressive strengths of up to 10 MPa after 7 d of curing. These results demonstrate that red mud is an effective precursor to produce one‐part geopolymer binders, via thermal and alkali‐activation processes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Advances in alternative cementitious binders
Juenger, M. C. G., Winnefeld, F., Provis, J. L., & Ideker, J. H. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.012 · Cited by 1,851
Self-citationDuxson, P., Provis, J. L., Lukey, G. C., Mallicoat, S. W., Kriven, W. M., & van Deventer, J. S. J. (2005) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2005.06.060 · Cited by 1,807
Self-citationStructure of Calcium Silicate Hydrate (C‐S‐H): Near‐, Mid‐, and Far‐Infrared Spectroscopy
Yu, P., Kirkpatrick, R. J., Poe, B., McMillan, P. F., & Cong, X. (1999) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1999.tb01826.x · Cited by 1,640
Geopolymers and Related Alkali-Activated Materials
Provis, J. L., & Bernal, S. A. (2014) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070813-113515 · Cited by 1,597
Self-citationGeopolymers and other alkali activated materials: why, how, and what?
Provis, J. L. (2014) · Materials and Structures · doi:10.1617/s11527-013-0211-5 · Cited by 986
Self-citationDo Geopolymers Actually Contain Nanocrystalline Zeolites? A Reexamination of Existing Results
Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2005) · Chemistry of Materials · doi:10.1021/cm050230i · Cited by 818
Self-citationFactors affecting the strength of alkali-activated slag
Wang, S.-D., Scrivener, K. L., & Pratt, P. L. (1994) · Cement and Concrete Research · doi:10.1016/0008-8846(94)90026-4 · Cited by 716
Designing Precursors for Geopolymer Cements
Duxson, P., & Provis, J. L. (2008) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2008.02787.x · Cited by 662
Self-citationBauxite residue issues: III. Alkalinity and associated chemistry
Gräfe, M., Power, G., & Klauber, C. (2011) · Hydrometallurgy · doi:10.1016/j.hydromet.2011.02.004 · Cited by 513
van Deventer, J. S. J., Provis, J. L., Duxson, P., & Brice, D. G. (2010) · Waste and Biomass Valorization · doi:10.1007/s12649-010-9015-9 · Cited by 494
Self-citation
Cited by
Provis, J. L. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.009 · Cited by 2,272
Self-citationAdvances in understanding alkali-activated materials
Provis, J. L., Palomo, A., & Shi, C. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.04.013 · Cited by 1,537
Self-citationOne-part alkali-activated materials: A review
Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.001 · Cited by 1,456
Structure and properties of clay-based geopolymer cements: A review
Liew, Y.-M., Heah, C.-Y., Mohd Mustafa, A. B., & Kamarudin, H. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2016.08.002 · Cited by 574
Synthesis and strength optimization of one-part geopolymer based on red mud
Ye, N., Yang, J., Liang, S., Hu, Y., Hu, J., Xiao, B., & Huang, Q. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.099 · Cited by 363
Self-citation
Metadata
- Authors
- Ke, X., Bernal, S. A., Ye, N., Provis, J. L., & Yang, J.
- Venue
- Journal of the American Ceramic Society
- Publisher
- Wiley
- Published
- 2014-09-30
- Volume
- 98
- Issue
- 1
- Pages
- 5-11
- ISSN
- 0002-7820 (ISSN-L)
- 1551-2916
- OpenAlex
- W1998045126
- Cited by
- 283
- References
- 40
- FWCI
- 26.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: One‐Part Geopolymers Based on Thermally Treated Red Mud/NaOH Blends. https://app.cochat.ai/papers/10.1111/jace.13231
- The paper
- Ke, X., Bernal, S. A., Ye, N., Provis, J. L., & Yang, J. (2015). One‐Part Geopolymers Based on Thermally Treated Red Mud/NaOH Blends. Journal of the American Ceramic Society. https://doi.org/10.1111/jace.13231
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.